[PATCH v2] ARM: dts: socfpga: Add Macnica sodia board

[Florian Fainelli]

On 09/24/2016 04:59 PM, Nobuhiro Iwamatsu wrote:
> Add support for board based on the Altera Cyclone V SoC.
> This board has the following functions:
>     - 1 GiB of DRAM
>     - 1 Gigabit ethernet
>     - 1 SD card slot
>     - 1 USB gadget port
>     - QSPI NOR Flash
>     - I2C EEPROMs and I2C RTC
>     - DVI output
>     - Audio port
> 
> This commit supports without QSPI, DVI and Audio.
> 
> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> ---
>  V2: move the PHY of setting to the Ethetnet PHY node level.
> 
>  arch/arm/boot/dts/Makefile                   |   1 +
>  arch/arm/boot/dts/socfpga_cyclone5_sodia.dts | 123 +++++++++++++++++++++++++++
>  2 files changed, 124 insertions(+)
>  create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index befcd26..7c5f0c3 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -696,6 +696,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \
>  	socfpga_cyclone5_de0_sockit.dtb \
>  	socfpga_cyclone5_sockit.dtb \
>  	socfpga_cyclone5_socrates.dtb \
> +	socfpga_cyclone5_sodia.dtb \
>  	socfpga_cyclone5_vining_fpga.dtb \
>  	socfpga_vt.dtb
>  dtb-$(CONFIG_ARCH_SPEAR13XX) += \
> diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
> new file mode 100644
> index 0000000..9aaf413
> --- /dev/null
> +++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
> @@ -0,0 +1,123 @@
> +/*
> + *  Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "socfpga_cyclone5.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board";
> +	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
> +
> +	chosen {
> +		bootargs = "earlyprintk";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory {
> +		name = "memory";
> +		device_type = "memory";
> +		reg = <0x0 0x40000000>;
> +	};
> +
> +	aliases {
> +		ethernet0 = &gmac1;
> +	};
> +
> +	regulator_3_3v: 3-3-v-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3.3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	leds: gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		hps_led0 {
> +			label = "hps:green:led0";
> +			gpios = <&portb 12 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		hps_led1 {
> +			label = "hps:green:led1";
> +			gpios = <&portb 13 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		hps_led2 {
> +			label = "hps:green:led2";
> +			gpios = <&portb 14 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		hps_led3 {
> +			label = "hps:green:led3";
> +			gpios = <&portb 15 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};
> +
> +&gmac1 {
> +	status = "okay";
> +	phy-mode = "rgmii";
> +	phy = <&phy0>;
> +
> +	mdio0 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		phy0: ethernet-phy at 0 {
> +			reg = <0>;
> +			rxd0-skew-ps = <0>;
> +			rxd1-skew-ps = <0>;
> +			rxd2-skew-ps = <0>;
> +			rxd3-skew-ps = <0>;
> +			rxdv-skew-ps = <0>;
> +			rxc-skew-ps = <3000>;
> +			txen-skew-ps = <0>;
> +			txc-skew-ps = <3000>;
> +		};

This looks much better now, thanks!
--
Florian