[PATCH 1/2] armv8: aarch32: Execute 32-bit Linux for LayerScape platforms

[Rob Herring]

On Fri, Sep 23, 2016 at 8:18 AM, Robin Murphy <robin.murphy at arm.com> wrote:
> On 23/09/16 14:13, Stuart Yoder wrote:
>>
>>
>>> -----Original Message-----
>>> From: Robin Murphy [mailto:robin.murphy at arm.com]
>>> Sent: Friday, September 23, 2016 7:17 AM
>>> To: Alison Wang <b18965 at freescale.com>; shawnguo at kernel.org; kernel at pengutronix.de; Fabio Estevam
>>> Estevam <fabio.estevam at nxp.com>; linux at armlinux.org.uk; linux-arm-kernel at lists.infradead.org; linux-
>>> kernel at vger.kernel.org; Scott Wood <scott.wood at nxp.com>; Stuart Yoder <stuart.yoder at nxp.com>; Leo Li
>>> <leoyang.li at nxp.com>
>>> Cc: Jason Jin <jason.jin at nxp.com>
>>> Subject: Re: [PATCH 1/2] armv8: aarch32: Execute 32-bit Linux for LayerScape platforms
>>>
>>> Hi Alison,
>>>
>>> On 23/09/16 03:19, Alison Wang wrote:
>>>> The ARMv8 architecture supports:
>>>> 1. 64-bit execution state, AArch64.
>>>> 2. 32-bit execution state, AArch32, that is compatible with previous
>>>> versions of the ARM architecture.
>>>>
>>>> LayerScape platforms are compliant with ARMv8 architecture. This patch
>>>> is to support running 32-bit Linux kernel for LayerScape platforms.
>>>>
>>>> Verified on LayerScape LS1043ARDB, LS1012ARDB, LS1046ARDB boards.
>>>>
>>>> Signed-off-by: Ebony Zhu <ebony.zhu at nxp.com>
>>>> Signed-off-by: Alison Wang <alison.wang at nxp.com>
>>>> ---
>>>>  arch/arm/Kconfig                    |  9 +++++++++
>>>>  arch/arm/mach-imx/Kconfig           | 14 ++++++++++++++
>>>>  arch/arm/mach-imx/Makefile          |  4 +++-
>>>>  arch/arm/mach-imx/mach-layerscape.c | 23 +++++++++++++++++++++++
>>>>  4 files changed, 49 insertions(+), 1 deletion(-)
>>>>  create mode 100644 arch/arm/mach-imx/mach-layerscape.c
>>>>
>>>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>>>> index f0c8068..e8d470e 100644
>>>> --- a/arch/arm/Kconfig
>>>> +++ b/arch/arm/Kconfig
>>>> @@ -294,6 +294,15 @@ config PGTABLE_LEVELS
>>>>     default 3 if ARM_LPAE
>>>>     default 2
>>>>
>>>> +config ARCH_AARCH32_ES_SUPPORT
>>>> +   def_bool n
>>>> +   help
>>>> +    The ARMv8 architecture supports 64-bit execution state, AArch64
>>>> +    and 32-bit execution state, AArch32, that is compatible with
>>>> +    previous versions of the ARM architecture.
>>>> +
>>>> +    Enable AArch32 execution state support for ARMv8 architecture.
>>>
>>> What's this supposed to do, exactly? I've been running 32-bit kernels on
>>> my Juno with very little issue (beyond a couple of DT tweaks, and some
>>> firmware hacks with a corresponding bit of A64 assembly tacked on the
>>> front of the zImage to switch into AArch32 state).
>>
>> Which arch/arm/mach-* platform are you using for Juno?
>
> I don't even know! :) I just start with a multi_v7_defconfig plus a few
> extra bits (LPAE, KVM, sil24, sky2, etc.) and it works. I guess it's the
> combination of mach-vexpress and mach-virt.

I believe the answer is none. Enabling VExpress may enable other
drivers, but obviously none of the code in mach-vexpress is needed
since it is not used for 64-bit builds.

Rob