[PATCH v3] gpio: Added zynq specific check for special pins on bank zero
Nava kishore Manne
nava.manne at xilinx.com
Fri Sep 23 04:26:58 PDT 2016
From: Nava kishore Manne <nava.manne at xilinx.com>
This patch adds zynq specific check for bank 0 pins 7 and 8
are special and cannot be used as inputs
Signed-off-by: Nava kishore Manne <navam at xilinx.com>
Reported-by: Jonas Karlsson <Jonas.d.karlsson at gmail.com>
Acked-by: Sören Brinkmann <soren.brinkmann at xilinx.com>
Acked-by: Michal Simek <michal.simek at xilinx.com>
---
Changes for v3:
-Fixed some minor comments.
Changes for v2:
-Removed un-used quirks for zynqmp.
drivers/gpio/gpio-zynq.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index e72794e..6b4d10d 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -96,6 +96,9 @@
/* GPIO upper 16 bit mask */
#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
+/* For GPIO quirks */
+#define ZYNQ_GPIO_QUIRK_FOO BIT(0)
+
/**
* struct zynq_gpio - gpio device private data structure
* @chip: instance of the gpio_chip
@@ -122,6 +125,7 @@ struct zynq_gpio {
*/
struct zynq_platform_data {
const char *label;
+ u32 quirks;
u16 ngpio;
int max_bank;
int bank_min[ZYNQMP_GPIO_MAX_BANK];
@@ -238,13 +242,19 @@ static void zynq_gpio_set_value(struct gpio_chip *chip, unsigned int pin,
static int zynq_gpio_dir_in(struct gpio_chip *chip, unsigned int pin)
{
u32 reg;
+ bool is_zynq_gpio;
unsigned int bank_num, bank_pin_num;
struct zynq_gpio *gpio = gpiochip_get_data(chip);
+ is_zynq_gpio = gpio->p_data->quirks & ZYNQ_GPIO_QUIRK_FOO;
zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
- /* bank 0 pins 7 and 8 are special and cannot be used as inputs */
- if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
+ /*
+ * On zynq bank 0 pins 7 and 8 are special and cannot be used
+ * as inputs.
+ */
+ if (is_zynq_gpio && bank_num == 0 &&
+ (bank_pin_num == 7 || bank_pin_num == 8))
return -EINVAL;
/* clear the bit in direction mode reg to set the pin as input */
@@ -627,6 +637,7 @@ static const struct zynq_platform_data zynqmp_gpio_def = {
static const struct zynq_platform_data zynq_gpio_def = {
.label = "zynq_gpio",
+ .quirks = ZYNQ_GPIO_QUIRK_FOO,
.ngpio = ZYNQ_GPIO_NR_GPIOS,
.max_bank = ZYNQ_GPIO_MAX_BANK,
.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),
--
2.1.2
More information about the linux-arm-kernel
mailing list