[PATCH V3 2/4] ARM64 LPC: LPC driver implementation on Hip06

[Gabriele Paoloni]

Hi Arnd

> -----Original Message-----
> From: Arnd Bergmann [mailto:arnd at arndb.de]
> Sent: 21 September 2016 21:18
> To: Gabriele Paoloni
> Cc: zhichang; linux-arm-kernel at lists.infradead.org;
> devicetree at vger.kernel.org; lorenzo.pieralisi at arm.com; minyard at acm.org;
> linux-pci at vger.kernel.org; gregkh at linuxfoundation.org; John Garry;
> will.deacon at arm.com; linux-kernel at vger.kernel.org; Yuanzhichang;
> Linuxarm; xuwei (O); linux-serial at vger.kernel.org;
> benh at kernel.crashing.org; zourongrong at gmail.com; liviu.dudau at arm.com;
> kantyzc at 163.com
> Subject: Re: [PATCH V3 2/4] ARM64 LPC: LPC driver implementation on
> Hip06
> 
> On Wednesday, September 21, 2016 4:20:55 PM CEST Gabriele Paoloni
> wrote:
> > > -----Original Message-----
> > > From: zhichang [mailto:zhichang.yuan02 at gmail.com]
> > > On 2016年09月15日 20:24, Arnd Bergmann wrote:
> > > > On Thursday, September 15, 2016 12:05:51 PM CEST Gabriele Paoloni
> > > wrote:
> > > >>> -----Original Message-----
> > > >>> On Thursday, September 15, 2016 8:02:27 AM CEST Gabriele
> Paoloni
> > > wrote:
> > > >> I think that maybe having the 1:1 range mapping doesn't
> > > >> reflect well the reality but it is the less painful
> > > >> solution...
> > > >>
> > > >> What's your view?
> > > >
> > > > We can check the 'i' bit for I/O space in of_bus_isa_get_flags,
> > > > and that should be enough to translate the I/O port number.
> > > >
> > > > The only part we need to change here is to not go through
> > > > the crazy conversion all the way from PCI I/O space to a
> > > > physical address and back to a (logical) port number
> > > > that we do today with of_translate_address/pci_address_to_pio.
> > > >
> > > Sorry for the late response! Several days' leave....
> > > Do you want to bypass of_translate_address and pci_address_to_pio
> for
> > > the registered specific PIO?
> > > I think the bypass for of_translate_address is ok, but worry some
> new
> > > issues will emerge without the
> > > conversion between physical address and logical/linux port number.
> 
> The same function that handles the non-translated region would
> do that conversion.
> 
> > > When PCI host bridge which support IO operations is configured and
> > > enabled, the pci_address_to_pio will
> > > populate the logical IO range from ZERO for the first host bridge.
> Our
> > > LPC will also use part of the IO range
> > > started from ZERO. It will make in/out enter the wrong branch
> possibly.
> > >
> > > In V2, the 0 - 0x1000 logical IO range is reserved for LPC use
> only.
> > > But it seems not so good. In this way,
> > > PCI has no chance to use low 4K IO range(logical).
> > >
> > > So, in V3, applying the conversion from physical/cpu address to
> > > logical/linux IO port for any IO ranges,
> > > including the LPC, but recorded the logical IO range for LPC. When
> > > calling in/out with a logical port address,
> > > we can check this port fall into LPC logical IO range and get back
> the
> > > real IO.
> 
> Right, and the same translation can be used in
> __of_address_to_resource()
> going the opposite way.
> 
> > > Do you have further comments about this??
> >
> > I think there are two separate issues to be discussed:
> >
> > The first issue is about having of_translate_address failing due to
> > "range" missing. About this Arnd suggested that it is not appropriate
> > to have a range describing a bridge 1:1 mapping and this was
> discussed
> > before in this thread. Arnd had a suggestion about this (see below)
> > however (looking twice at the code) it seems to me that such solution
> > would lead to quite some duplication from __of_translate_address()
> > in order to retrieve the actual addr from dt...
> 
> I don't think we need to duplicate much, we can probably safely
> assume that there are no nontrivial ranges in devices below the LPC
> node, so we just walk up the bus to see if the node is a child
> (or possibly grandchild etc) of the LPC bus, and treat any IO port
> number under there as a physical port number, which has a known
> offset from the Linux I/O port number.
> 
> > I think extending of_empty_ranges_quirk() may be a reasonable
> solution.
> > What do you think Arnd?
> 
> I don't really like that idea, that quirk is meant to work around
> broken DTs, but we can just make the DT valid and implement the
> code properly.

Ok  I understand your point where it is not right to use of_empty_ranges_quirk()
As a quirk is used to work around broken HW or broken FW (as in this case)
rather than to fix code

What about the following? I think adding the check you suggested next to
of_empty_ranges_quirk() is adding the case we need in the right point (thus
avoiding any duplication)
 
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -457,6 +457,15 @@ static struct of_bus *of_match_bus(struct device_node *np)
        return NULL;
 }
 
+static inline int of_isa_indirect_io(struct device_node *np)
+{
+       /*
+        * check if the current node is an isa bus and if indirectio operation
+        * are registered
+        */
+       return (of_bus_isa_match(np) && arm64_extio_ops);
+}
+
 static int of_empty_ranges_quirk(struct device_node *np)
 {
        if (IS_ENABLED(CONFIG_PPC)) {
@@ -503,7 +512,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
         * This code is only enabled on powerpc. --gcl
         */
        ranges = of_get_property(parent, rprop, &rlen);
-       if (ranges == NULL && !of_empty_ranges_quirk(parent)) {
+       if (ranges == NULL && !of_empty_ranges_quirk(parent) && !of_isa_indirect_io(parent)) {
                pr_debug("OF: no ranges; cannot translate\n");
                return 1;
        }


> 
> > The second issue is a conflict between cpu addresses used by the LPC
> > controller and i/o tokens from pci endpoints.
> >
> > About this what if we modify armn64_extio_ops to have a list of
> ranges
> > rather than only one range (now we have just start/end); then in the
> > LPC driver we can scan the LPC child devices and
> > 1) populate such list of ranges
> > 2) call pci_register_io_range for such ranges
> 
> Scanning the child devices sounds really wrong, please register just
> one range that covers the bus to keep the workaround as simple
> as possible.
> 
> > Then when calling __of_address_to_resource we retrieve I/O tokens
> > for the devices on top of the LPC driver and in the I/O accessors
> > we call pci_pio_to_address to figure out the cpu address and compare
> > it to the list of ranges in armn64_extio_ops.
> >
> > What about this?
> 
> That seems really complex for something that can be quite simple.
> The only thing we need to worry about is that the io_range_list
> contains an entry for the LPC bus so we don't conflict with the
> PCI buses.

Thanks

I discussed with Zhichang and we agreed to use only one LPC range
to be registered with pci_register_io_range.

We'll rework the accessors to check if the retrieved I/O tokens
belong to LPC or PCI IO range...

Cheers

Gab


> 
> 	Arnd
> 
> 	Arnd