[RESEND PATCH v7 1/2] sdhci-of-arasan: Add device tree parameter xlnx,fails-without-test-cd bit

[Ulf Hansson]

On 16 September 2016 at 17:01, Zach Brown <zach.brown at ni.com> wrote:
> The sdhci controller on xilinx zynq devices will not function unless
> the CD bit is provided. http://www.xilinx.com/support/answers/61064.html
> In cases where it is impossible to provide the CD bit in hardware,
> setting the controller to test mode and then setting inserted to true
> will get the controller to function without the CD bit.
>
> The device property "xlnx,fails-without-test-cd" will let the arasan
> driver know the controller does not have the CD line wired and that the
> controller does not function without it.
>
> Signed-off-by: Zach Brown <zach.brown at ni.com>

Thanks, applied for next! I took the liberty to shrink the commit msg
header bit and to add "dt: " prefix.

Kind regards
Uffe

> ---
> v2:
>  * improved commit messages
>  * removed fake-cd device property
>  * removed fake-cd quirk
>  * use broken-cd device property
>  * documented new usage of broken-cd
> v3:
>  * removed new usage of broken-cd
>  * created fails-without-test-cd device property
>  * created arasan controller specific quirk
> v4:
>  * changed fails-without-test-cd to xlnx-fails-without-test-cd
>  * removed extra blank line
> v5:
>  * Fixed style mistake
>  * Changed (1 << 0 ) to BIT(0)
> v6:
>  * Fixed style mistakes
>  * Condensed unnecessarily long variable names
>  * Removed line wraps that were no longer necessary.
>  * Rebased changes off Ulf's mmc tree's next branch.
> v7:
>  * Removed erroneous re-creation of Optional Properties section
>  * Changed xlnx-fails-without-test-cd to xlnx,fails-without-test-cd
>  * Changed of_get_property to of_property_read_bool
>
>
>  Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> index 3404afa..49df630 100644
> --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> @@ -36,6 +36,9 @@ Optional Properties:
>    - #clock-cells: If specified this should be the value <0>.  With this property
>      in place we will export a clock representing the Card Clock.  This clock
>      is expected to be consumed by our PHY.  You must also specify
> +  - xlnx,fails-without-test-cd: when present, the controller doesn't work when
> +    the CD line is not connected properly, and the line is not connected
> +    properly. Test mode can be used to force the controller to function.
>
>  Example:
>         sdhci at e0100000 {
> --
> 2.7.4
>