[PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig

Florian Fainelli f.fainelli at gmail.com
Wed Sep 21 12:39:16 PDT 2016


On 09/19/2016 06:31 AM, Eric Anholt wrote:
> Most of the drivers are included as modules, except for serial (needed
> for early console), WDT (required for reboot), and the dependency
> chain of RASPBERRYPI_POWER (which is currently not buildable as a
> module, but should be changed).
> 
> Signed-off-by: Eric Anholt <eric at anholt.net>

LGTM, can you queue this for the next ARM/ARM64 SoC pull request in a
separate branch for me to pull from?

Thanks!

> ---
>  arch/arm64/configs/defconfig | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index fb8d84516e92..9748c4735a60 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -34,6 +34,7 @@ CONFIG_MODULE_UNLOAD=y
>  # CONFIG_IOSCHED_DEADLINE is not set
>  CONFIG_ARCH_SUNXI=y
>  CONFIG_ARCH_ALPINE=y
> +CONFIG_ARCH_BCM2835=y
>  CONFIG_ARCH_BCM_IPROC=y
>  CONFIG_ARCH_BERLIN=y
>  CONFIG_ARCH_EXYNOS=y
> @@ -193,6 +194,7 @@ CONFIG_USB_NET_SMSC75XX=m
>  CONFIG_USB_NET_SMSC95XX=m
>  CONFIG_USB_NET_PLUSB=m
>  CONFIG_USB_NET_MCS7830=m
> +CONFIG_BRCMFMAC=m
>  CONFIG_WL18XX=m
>  CONFIG_WLCORE_SDIO=m
>  CONFIG_INPUT_EVDEV=y
> @@ -205,6 +207,9 @@ CONFIG_SERIO_AMBAKMI=y
>  CONFIG_LEGACY_PTY_COUNT=16
>  CONFIG_SERIAL_8250=y
>  CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_EXTENDED=y
> +CONFIG_SERIAL_8250_SHARE_IRQ=y
> +CONFIG_SERIAL_8250_BCM2835AUX=y
>  CONFIG_SERIAL_8250_DW=y
>  CONFIG_SERIAL_8250_MT6577=y
>  CONFIG_SERIAL_8250_UNIPHIER=y
> @@ -228,6 +233,7 @@ CONFIG_VIRTIO_CONSOLE=y
>  CONFIG_I2C_CHARDEV=y
>  CONFIG_I2C_MUX=y
>  CONFIG_I2C_MUX_PCA954x=y
> +CONFIG_I2C_BCM2835=m
>  CONFIG_I2C_DESIGNWARE_PLATFORM=y
>  CONFIG_I2C_IMX=y
>  CONFIG_I2C_MESON=y
> @@ -238,6 +244,8 @@ CONFIG_I2C_UNIPHIER_F=y
>  CONFIG_I2C_RCAR=y
>  CONFIG_I2C_CROS_EC_TUNNEL=y
>  CONFIG_SPI=y
> +CONFIG_SPI_BCM2835=m
> +CONFIG_SPI_BCM2835AUX=m
>  CONFIG_SPI_MESON_SPIFC=m
>  CONFIG_SPI_ORION=y
>  CONFIG_SPI_PL022=y
> @@ -272,6 +280,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
>  CONFIG_CPU_THERMAL=y
>  CONFIG_EXYNOS_THERMAL=y
>  CONFIG_WATCHDOG=y
> +CONFIG_BCM2835_WDT=y
>  CONFIG_RENESAS_WDT=y
>  CONFIG_S3C2410_WATCHDOG=y
>  CONFIG_MESON_GXBB_WATCHDOG=m
> @@ -294,6 +303,7 @@ CONFIG_REGULATOR_S2MPS11=y
>  CONFIG_DRM=m
>  CONFIG_DRM_NOUVEAU=m
>  CONFIG_DRM_TEGRA=m
> +CONFIG_DRM_VC4=m
>  CONFIG_DRM_PANEL_SIMPLE=m
>  CONFIG_DRM_I2C_ADV7511=m
>  CONFIG_DRM_HISI_KIRIN=m
> @@ -308,6 +318,7 @@ CONFIG_LOGO=y
>  CONFIG_SOUND=y
>  CONFIG_SND=y
>  CONFIG_SND_SOC=y
> +CONFIG_SND_BCM2835_SOC_I2S=m
>  CONFIG_SND_SOC_RCAR=y
>  CONFIG_SND_SOC_SAMSUNG=y
>  CONFIG_SND_SOC_AK4613=y
> @@ -372,6 +383,7 @@ CONFIG_RTC_DRV_XGENE=y
>  CONFIG_RTC_DRV_S3C=y
>  CONFIG_DMADEVICES=y
>  CONFIG_PL330_DMA=y
> +CONFIG_DMA_BCM2835=m
>  CONFIG_TEGRA20_APB_DMA=y
>  CONFIG_QCOM_BAM_DMA=y
>  CONFIG_QCOM_HIDMA_MGMT=y
> @@ -394,8 +406,10 @@ CONFIG_MSM_MMCC_8996=y
>  CONFIG_HWSPINLOCK_QCOM=y
>  CONFIG_MAILBOX=y
>  CONFIG_ARM_MHU=y
> +CONFIG_BCM2835_MBOX=y
>  CONFIG_HI6220_MBOX=y
>  CONFIG_ARM_SMMU=y
> +CONFIG_RASPBERRYPI_POWER=y
>  CONFIG_QCOM_SMEM=y
>  CONFIG_QCOM_SMD=y
>  CONFIG_QCOM_SMD_RPM=y
> @@ -403,6 +417,7 @@ CONFIG_ARCH_TEGRA_132_SOC=y
>  CONFIG_ARCH_TEGRA_210_SOC=y
>  CONFIG_EXTCON_USB_GPIO=y
>  CONFIG_PWM=y
> +CONFIG_PWM_BCM2835=m
>  CONFIG_PWM_TEGRA=m
>  CONFIG_COMMON_RESET_HI6220=y
>  CONFIG_PHY_RCAR_GEN3_USB2=y
> @@ -414,6 +429,7 @@ CONFIG_ACPI=y
>  CONFIG_IIO=y
>  CONFIG_EXYNOS_ADC=y
>  CONFIG_PWM_SAMSUNG=y
> +CONFIG_RASPBERRYPI_FIRMWARE=y
>  CONFIG_EXT2_FS=y
>  CONFIG_EXT3_FS=y
>  CONFIG_EXT4_FS_POSIX_ACL=y
> 


-- 
Florian



More information about the linux-arm-kernel mailing list