[PATCH V6 3/5] PCI: thunder-pem: Allow to probe PEM-specific register range for ACPI case

Lorenzo Pieralisi lorenzo.pieralisi at arm.com
Wed Sep 21 07:05:49 PDT 2016


On Tue, Sep 20, 2016 at 02:17:44PM -0500, Bjorn Helgaas wrote:
> On Tue, Sep 20, 2016 at 04:09:25PM +0100, Ard Biesheuvel wrote:

[...]

> > None of these platforms can be fixed entirely in software, and given
> > that we will not be adding quirks for new broken hardware, we should
> > ask ourselves whether having two versions of a quirk, i.e., one for
> > broken hardware + currently shipping firmware, and one for the same
> > broken hardware with fixed firmware is really an improvement over what
> > has been proposed here.
> 
> We're talking about two completely different types of quirks:
> 
>   1) MCFG quirks to use memory-mapped config space that doesn't quite
>      conform to the ECAM model in the PCIe spec, and
> 
>   2) Some yet-to-be-determined method to describe address space
>      consumed by a bridge.
> 
> The first two patches of this series are a nice implementation for 1).
> The third patch (ThunderX-specific) is one possibility for 2), but I
> don't like it because there's no way for generic software like the
> ACPI core to discover these resources.

Ok, so basically this means that to implement (2) we need to assign
some sort of _HID to these quirky PCI bridges (so that we know what
device they represent and we can retrieve their _CRS). I take from
this discussion that the goal is to make sure that all non-config
resources have to be declared through _CRS device objects, which is
fine but that requires a FW update (unless we can fabricate ACPI
devices and corresponding _CRS in the kernel whenever we match a
given MCFG table signature).

We discussed this already and I think we should make a decision:

http://lists.infradead.org/pipermail/linux-arm-kernel/2016-March/414722.html

> > > I'd like to step back and come up with some understanding of how
> > > non-broken firmware *should* deal with this issue.  Then, if we *do*
> > > work around this particular broken firmware in the kernel, it would be
> > > nice to do it in a way that fits in with that understanding.
> > >
> > > For example, if a companion ACPI device is the preferred solution, an
> > > ACPI quirk could fabricate a device with the required resources.  That
> > > would address the problem closer to the source and make it more likely
> > > that the rest of the system will work correctly: /proc/iomem could
> > > make sense, things that look at _CRS generically would work (e.g,
> > > /sys/, an admittedly hypothetical "lsacpi", etc.)
> > >
> > > Hard-coding stuff in drivers is a point solution that doesn't provide
> > > any guidance for future platforms and makes it likely that the hack
> > > will get copied into even more drivers.
> > >
> > 
> > OK, I see. But the guidance for future platforms should be 'do not
> > rely on quirks', and what I am arguing here is that the more we polish
> > up this code and make it clean and reusable, the more likely it is
> > that will end up getting abused by new broken hardware that we set out
> > to reject entirely in the first place.
> > 
> > So of course, if the quirk involves claiming resources, let's make
> > sure that this occurs in the cleanest and most compliant way possible.
> > But any factoring/reuse concerns other than for the current crop of
> > broken hardware should be avoided imo.
> 
> If future hardware is completely ECAM-compliant and we don't need any
> more MCFG quirks, that would be great.

Yes.

> But we'll still need to describe that memory-mapped config space
> somewhere.  If that's done with PNP0C02 or similar devices (as is done
> on my x86 laptop), we'd be all set.

I am not sure I understand what you mean here. Are you referring
to MCFG regions reported as PNP0c02 resources through its _CRS ?

IIUC PNP0C02 is a reservation mechanism, but it does not help us
associate its _CRS to a specific PCI host bridge instance, right ?

> If we need to work around firmware in the field that doesn't do that,
> one possibility is a PNP quirk along the lines of
> quirk_amd_mmconfig_area().

You mean matching PNP0C01/PNP0c02 and create a resource (that has to
hardcoded in a static array in the kernel anyway, there is no way to
retrieve it otherwise) in the corresponding PNP quirk handler ?

And it is not a given we can match against PNP0c01/PNP0c02.

So it looks like the only solution is allocating an _HID for each
host bridge that is not ECAM compliant to add resources to its _CRS
(unless the MCFG quirk does not need any additional data/resource,
eg "use different set of PCI accessorsi 32-bit vs byte-access").

For FW that is immutable I really do not see what we can do apart
from hardcoding the non-config resources (consumed by a bridge),
somehow.

Thanks,
Lorenzo



More information about the linux-arm-kernel mailing list