[PATCH 1/4] ARM: tegra: nyan: Use proper IRQ type definitions

[Paul Kocialkowski]

Le mercredi 21 septembre 2016 à 08:52 +0100, Jon Hunter a écrit :
> On 20/09/16 19:14, Paul Kocialkowski wrote:
> > 
> > * PGP Signed by an unknown key
> > 
> > Le mardi 20 septembre 2016 à 18:15 +0100, Jon Hunter a écrit :
> > > 
> > > On 28/08/16 18:32, Paul Kocialkowski wrote:
> > > > 
> > > > 
> > > > This switches a few interrupt definitions that were using
> > > > GPIO_ACTIVE_HIGH as IRQ type, which is invalid.
> > > 
> > > May be you are right, but this does not describe why this is invalid.
> > > Can you elaborate?
> > 
> > GPIO_ACTIVE_HIGH is simply not the right kind of define to use in the
> > "interrupts" devicetree property. Values provided there are understood as
> > IRQ_TYPE_ defines.
> 
> Right, but you are changing the type as GPIO_ACTIVE_HIGH = 0 and
> IRQ_TYPE_EDGE_FALLING = 2 and there is no comment about why this has
> been changed. It might be correct, but you need to explain it.

This actually makes the IRQ trigger values consistent with the drivers, that
define them regardless of devicetree anyway. The max98090 driver
has IRQF_TRIGGER_FALLING and bq24735 has IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING.

This is really more of a cosmetic change, it doesn't impact actual use.

-- 
Paul Kocialkowski, developer of low-level free software for embedded devices

Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160921/989111ff/attachment.sig>