[PATCH 6/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260
Krzysztof Kozlowski
krzk at kernel.org
Fri Sep 16 14:42:01 PDT 2016
Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability
Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
arch/arm/boot/dts/exynos5260.dtsi | 50 ++++++++++++++++++++-------------------
1 file changed, 26 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index b0848a3d3d88..5818718618b1 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -169,7 +170,8 @@
<0x10482000 0x1000>,
<0x10484000 0x2000>,
<0x10486000 0x2000>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
chipid: chipid at 10000000 {
@@ -182,18 +184,18 @@
reg = <0x100B0000 0x1000>;
clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
clock-names = "fin_pll", "mct";
- interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
- <0 105 IRQ_TYPE_LEVEL_HIGH>,
- <0 106 IRQ_TYPE_LEVEL_HIGH>,
- <0 107 IRQ_TYPE_LEVEL_HIGH>,
- <0 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 126 IRQ_TYPE_LEVEL_HIGH>,
- <0 127 IRQ_TYPE_LEVEL_HIGH>,
- <0 128 IRQ_TYPE_LEVEL_HIGH>,
- <0 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
};
cci: cci at 10F00000 {
@@ -219,25 +221,25 @@
pinctrl_0: pinctrl at 11600000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x11600000 0x1000>;
- interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl at 12290000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x12290000 0x1000>;
- interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl at 128B0000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x128B0000 0x1000>;
- interrupts = <0 243 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller at 10D50000 {
@@ -248,7 +250,7 @@
uart0: serial at 12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
- interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -257,7 +259,7 @@
uart1: serial at 12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
- interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -266,7 +268,7 @@
uart2: serial at 12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
- interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -275,7 +277,7 @@
uart3: serial at 12860000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12860000 0x100>;
- interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -284,7 +286,7 @@
mmc_0: mmc at 12140000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12140000 0x2000>;
- interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -296,7 +298,7 @@
mmc_1: mmc at 12150000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12150000 0x2000>;
- interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -308,7 +310,7 @@
mmc_2: mmc at 12160000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12160000 0x2000>;
- interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
--
2.7.4
More information about the linux-arm-kernel
mailing list