[PATCH 07/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
Krzysztof Kozlowski
krzk at kernel.org
Fri Sep 16 12:42:48 PDT 2016
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski at samsung.com>
Reported-by: Geert Uytterhoeven <geert at linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys at gmail.com>
Cc: Marc Zyngier <marc.zyngier at arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
arch/arm/boot/dts/exynos5250.dtsi | 80 +++++++++++++++++++--------------------
1 file changed, 40 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index f7357d99b47c..4e00c0d06c67 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -181,8 +181,8 @@
<0x1 0 &combiner 23 4>,
<0x2 0 &combiner 25 2>,
<0x3 0 &combiner 25 3>,
- <0x4 0 &gic 0 120 0>,
- <0x5 0 &gic 0 121 0>;
+ <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -195,31 +195,31 @@
pinctrl_0: pinctrl at 11400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl at 13400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 0>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl at 10d10000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 0>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl at 03860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller at 10040000 {
@@ -236,7 +236,7 @@
watchdog at 101D0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
- interrupts = <0 42 0>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -245,7 +245,7 @@
g2d at 10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
- interrupts = <0 91 0>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
iommus = <&sysmmu_g2d>;
@@ -254,7 +254,7 @@
mfc: codec at 11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
- interrupts = <0 96 0>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
@@ -265,7 +265,7 @@
rotator: rotator at 11C00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
- interrupts = <0 84 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -274,7 +274,7 @@
tmu: tmu at 10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
- interrupts = <0 65 0>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -284,7 +284,7 @@
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
- interrupts = <0 115 0>;
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
@@ -306,7 +306,7 @@
i2c_4: i2c at 12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
- interrupts = <0 60 0>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C4>;
@@ -319,7 +319,7 @@
i2c_5: i2c at 12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
- interrupts = <0 61 0>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C5>;
@@ -332,7 +332,7 @@
i2c_6: i2c at 12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
- interrupts = <0 62 0>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C6>;
@@ -345,7 +345,7 @@
i2c_7: i2c at 12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
- interrupts = <0 63 0>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C7>;
@@ -358,7 +358,7 @@
i2c_8: i2c at 12CE0000 {
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x12CE0000 0x1000>;
- interrupts = <0 64 0>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C_HDMI>;
@@ -380,7 +380,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d20000 0x100>;
- interrupts = <0 66 0>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
@@ -396,7 +396,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d30000 0x100>;
- interrupts = <0 67 0>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
@@ -412,7 +412,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d40000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
@@ -426,7 +426,7 @@
mmc_0: mmc at 12200000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x1000>;
@@ -438,7 +438,7 @@
mmc_1: mmc at 12210000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x1000>;
@@ -450,7 +450,7 @@
mmc_2: mmc at 12220000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
@@ -463,7 +463,7 @@
mmc_3: mmc at 12230000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12230000 0x1000>;
- interrupts = <0 78 0>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
@@ -526,7 +526,7 @@
usbdrd_dwc3: dwc3 at 12000000 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -544,7 +544,7 @@
ehci: usb at 12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -559,7 +559,7 @@
ohci: usb at 12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -591,7 +591,7 @@
pdma0: pdma at 121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
- interrupts = <0 34 0>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -602,7 +602,7 @@
pdma1: pdma at 121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
- interrupts = <0 35 0>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -613,7 +613,7 @@
mdma0: mdma at 10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
- interrupts = <0 33 0>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -624,7 +624,7 @@
mdma1: mdma at 11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
- interrupts = <0 124 0>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -636,7 +636,7 @@
gsc_0: gsc at 13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
- interrupts = <0 85 0>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
@@ -646,7 +646,7 @@
gsc_1: gsc at 13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
- interrupts = <0 86 0>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
@@ -656,7 +656,7 @@
gsc_2: gsc at 13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
- interrupts = <0 87 0>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
@@ -666,7 +666,7 @@
gsc_3: gsc at 13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
- interrupts = <0 88 0>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
@@ -677,7 +677,7 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
- interrupts = <0 95 0>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
@@ -690,7 +690,7 @@
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
- interrupts = <0 94 0>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -706,7 +706,7 @@
adc: adc at 12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
- interrupts = <0 106 0>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -718,7 +718,7 @@
sss at 10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
--
2.7.4
More information about the linux-arm-kernel
mailing list