[PATCH v7 05/11] ARM: dts: koelsch: Enable UHS-I SDR-50 and SDR-104

[Simon Horman]

On Tue, Sep 13, 2016 at 12:57:02PM +0200, Simon Horman wrote:
> Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,1,2}.
> And the sd-uhs-sdr104 property to SDHI0.
> 
> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>

As SDR50 support is present in the driver in mainline (correct me if I am
wrong!) I have queued this up after dropping the sdr104 portion and
updating the changelog accordingly.

The result is as follows:

From: Simon Horman <horms+renesas at verge.net.au>
Date: Tue, 13 Sep 2016 12:57:02 +0200
Subject: [PATCH] ARM: dts: koelsch: arm64: dts: r8a7795: salvator-x: enable
 UHS for SDHI 0, 1 & 3

Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,1,2}.

Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 33 ++++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index f8a7d090fd01..f17bfa000f73 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -360,16 +360,37 @@
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
 	};
 
 	sdhi1_pins: sd1 {
 		groups = "sdhi1_data4", "sdhi1_ctrl";
 		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
 	};
 
 	sdhi2_pins: sd2 {
 		groups = "sdhi2_data4", "sdhi2_ctrl";
 		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
 	};
 
 	qspi_pins: qspi {
@@ -454,33 +475,39 @@
 
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
 &sdhi1 {
 	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi1>;
 	vqmmc-supply = <&vccq_sdhi1>;
 	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
 &sdhi2 {
 	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi2>;
 	vqmmc-supply = <&vccq_sdhi2>;
 	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
-- 
2.7.0.rc3.207.g0ac5344