[PATCH 03/11] serial: stm32: header file creation
Alexandre TORGUE
alexandre.torgue at st.com
Thu Sep 15 09:42:35 PDT 2016
Signed-off-by: Gerald Baeza <gerald.baeza at st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue at st.com>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index e7ffd01..6236deb 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -28,214 +28,7 @@
#include <linux/serial_core.h>
#include <linux/clk.h>
-#define DRIVER_NAME "stm32-usart"
-
-struct stm32_usart_offsets {
- u8 cr1;
- u8 cr2;
- u8 cr3;
- u8 brr;
- u8 gtpr;
- u8 rtor;
- u8 rqr;
- u8 isr;
- u8 icr;
- u8 rdr;
- u8 tdr;
-};
-
-struct stm32_usart_config {
- u8 uart_enable_bit; /* USART_CR1_UE */
- bool has_7bits_data;
-};
-
-struct stm32_usart_info {
- struct stm32_usart_offsets ofs;
- struct stm32_usart_config cfg;
-};
-
-#define UNDEF_REG ~0
-
-/* Register offsets */
-struct stm32_usart_info stm32f4_info = {
- .ofs = {
- .isr = 0x00,
- .rdr = 0x04,
- .tdr = 0x04,
- .brr = 0x08,
- .cr1 = 0x0c,
- .cr2 = 0x10,
- .cr3 = 0x14,
- .gtpr = 0x18,
- .rtor = UNDEF_REG,
- .rqr = UNDEF_REG,
- .icr = UNDEF_REG,
- },
- .cfg = {
- .uart_enable_bit = 13,
- .has_7bits_data = false,
- }
-};
-
-struct stm32_usart_info stm32f7_info = {
- .ofs = {
- .cr1 = 0x00,
- .cr2 = 0x04,
- .cr3 = 0x08,
- .brr = 0x0c,
- .gtpr = 0x10,
- .rtor = 0x14,
- .rqr = 0x18,
- .isr = 0x1c,
- .icr = 0x20,
- .rdr = 0x24,
- .tdr = 0x28,
- },
- .cfg = {
- .uart_enable_bit = 0,
- .has_7bits_data = true,
- }
-};
-
-/* USART_SR (F4) / USART_ISR (F7) */
-#define USART_SR_PE BIT(0)
-#define USART_SR_FE BIT(1)
-#define USART_SR_NF BIT(2)
-#define USART_SR_ORE BIT(3)
-#define USART_SR_IDLE BIT(4)
-#define USART_SR_RXNE BIT(5)
-#define USART_SR_TC BIT(6)
-#define USART_SR_TXE BIT(7)
-#define USART_SR_LBD BIT(8)
-#define USART_SR_CTSIF BIT(9)
-#define USART_SR_CTS BIT(10) /* F7 */
-#define USART_SR_RTOF BIT(11) /* F7 */
-#define USART_SR_EOBF BIT(12) /* F7 */
-#define USART_SR_ABRE BIT(14) /* F7 */
-#define USART_SR_ABRF BIT(15) /* F7 */
-#define USART_SR_BUSY BIT(16) /* F7 */
-#define USART_SR_CMF BIT(17) /* F7 */
-#define USART_SR_SBKF BIT(18) /* F7 */
-#define USART_SR_TEACK BIT(21) /* F7 */
-#define USART_SR_ERR_MASK (USART_SR_LBD | USART_SR_ORE | \
- USART_SR_FE | USART_SR_PE)
-/* Dummy bits */
-#define USART_SR_DUMMY_RX BIT(16)
-
-/* USART_DR */
-#define USART_DR_MASK GENMASK(8, 0)
-
-/* USART_BRR */
-#define USART_BRR_DIV_F_MASK GENMASK(3, 0)
-#define USART_BRR_DIV_M_MASK GENMASK(15, 4)
-#define USART_BRR_DIV_M_SHIFT 4
-
-/* USART_CR1 */
-#define USART_CR1_SBK BIT(0)
-#define USART_CR1_RWU BIT(1) /* F4 */
-#define USART_CR1_RE BIT(2)
-#define USART_CR1_TE BIT(3)
-#define USART_CR1_IDLEIE BIT(4)
-#define USART_CR1_RXNEIE BIT(5)
-#define USART_CR1_TCIE BIT(6)
-#define USART_CR1_TXEIE BIT(7)
-#define USART_CR1_PEIE BIT(8)
-#define USART_CR1_PS BIT(9)
-#define USART_CR1_PCE BIT(10)
-#define USART_CR1_WAKE BIT(11)
-#define USART_CR1_M BIT(12)
-#define USART_CR1_M0 BIT(12) /* F7 */
-#define USART_CR1_MME BIT(13) /* F7 */
-#define USART_CR1_CMIE BIT(14) /* F7 */
-#define USART_CR1_OVER8 BIT(15)
-#define USART_CR1_DEDT_MASK GENMASK(20, 16) /* F7 */
-#define USART_CR1_DEAT_MASK GENMASK(25, 21) /* F7 */
-#define USART_CR1_RTOIE BIT(26) /* F7 */
-#define USART_CR1_EOBIE BIT(27) /* F7 */
-#define USART_CR1_M1 BIT(28) /* F7 */
-#define USART_CR1_IE_MASK (GENMASK(8, 4) | BIT(14) | BIT(26) | BIT(27))
-
-/* USART_CR2 */
-#define USART_CR2_ADD_MASK GENMASK(3, 0) /* F4 */
-#define USART_CR2_ADDM7 BIT(4) /* F7 */
-#define USART_CR2_LBDL BIT(5)
-#define USART_CR2_LBDIE BIT(6)
-#define USART_CR2_LBCL BIT(8)
-#define USART_CR2_CPHA BIT(9)
-#define USART_CR2_CPOL BIT(10)
-#define USART_CR2_CLKEN BIT(11)
-#define USART_CR2_STOP_2B BIT(13)
-#define USART_CR2_STOP_MASK GENMASK(13, 12)
-#define USART_CR2_LINEN BIT(14)
-#define USART_CR2_SWAP BIT(15) /* F7 */
-#define USART_CR2_RXINV BIT(16) /* F7 */
-#define USART_CR2_TXINV BIT(17) /* F7 */
-#define USART_CR2_DATAINV BIT(18) /* F7 */
-#define USART_CR2_MSBFIRST BIT(19) /* F7 */
-#define USART_CR2_ABREN BIT(20) /* F7 */
-#define USART_CR2_ABRMOD_MASK GENMASK(22, 21) /* F7 */
-#define USART_CR2_RTOEN BIT(23) /* F7 */
-#define USART_CR2_ADD_F7_MASK GENMASK(31, 24) /* F7 */
-
-/* USART_CR3 */
-#define USART_CR3_EIE BIT(0)
-#define USART_CR3_IREN BIT(1)
-#define USART_CR3_IRLP BIT(2)
-#define USART_CR3_HDSEL BIT(3)
-#define USART_CR3_NACK BIT(4)
-#define USART_CR3_SCEN BIT(5)
-#define USART_CR3_DMAR BIT(6)
-#define USART_CR3_DMAT BIT(7)
-#define USART_CR3_RTSE BIT(8)
-#define USART_CR3_CTSE BIT(9)
-#define USART_CR3_CTSIE BIT(10)
-#define USART_CR3_ONEBIT BIT(11)
-#define USART_CR3_OVRDIS BIT(12) /* F7 */
-#define USART_CR3_DDRE BIT(13) /* F7 */
-#define USART_CR3_DEM BIT(14) /* F7 */
-#define USART_CR3_DEP BIT(15) /* F7 */
-#define USART_CR3_SCARCNT_MASK GENMASK(19, 17) /* F7 */
-
-/* USART_GTPR */
-#define USART_GTPR_PSC_MASK GENMASK(7, 0)
-#define USART_GTPR_GT_MASK GENMASK(15, 8)
-
-/* USART_RTOR */
-#define USART_RTOR_RTO_MASK GENMASK(23, 0) /* F7 */
-#define USART_RTOR_BLEN_MASK GENMASK(31, 24) /* F7 */
-
-/* USART_RQR */
-#define USART_RQR_ABRRQ BIT(0) /* F7 */
-#define USART_RQR_SBKRQ BIT(1) /* F7 */
-#define USART_RQR_MMRQ BIT(2) /* F7 */
-#define USART_RQR_RXFRQ BIT(3) /* F7 */
-#define USART_RQR_TXFRQ BIT(4) /* F7 */
-
-/* USART_ICR */
-#define USART_ICR_PECF BIT(0) /* F7 */
-#define USART_ICR_FFECF BIT(1) /* F7 */
-#define USART_ICR_NCF BIT(2) /* F7 */
-#define USART_ICR_ORECF BIT(3) /* F7 */
-#define USART_ICR_IDLECF BIT(4) /* F7 */
-#define USART_ICR_TCCF BIT(6) /* F7 */
-#define USART_ICR_LBDCF BIT(8) /* F7 */
-#define USART_ICR_CTSCF BIT(9) /* F7 */
-#define USART_ICR_RTOCF BIT(11) /* F7 */
-#define USART_ICR_EOBCF BIT(12) /* F7 */
-#define USART_ICR_CMCF BIT(17) /* F7 */
-
-#define STM32_SERIAL_NAME "ttyS"
-#define STM32_MAX_PORTS 6
-
-struct stm32_port {
- struct uart_port port;
- struct clk *clk;
- struct stm32_usart_info *info;
- bool hw_flow_control;
-};
-
-static struct stm32_port stm32_ports[STM32_MAX_PORTS];
-static struct uart_driver stm32_usart_driver;
+#include "stm32-usart.h"
static void stm32_stop_tx(struct uart_port *port);
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
new file mode 100644
index 0000000..75f8388
--- /dev/null
+++ b/drivers/tty/serial/stm32-usart.h
@@ -0,0 +1,215 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Authors: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
+ * Gerald Baeza <gerald_baeza at yahoo.fr>
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#define DRIVER_NAME "stm32-usart"
+
+struct stm32_usart_offsets {
+ u8 cr1;
+ u8 cr2;
+ u8 cr3;
+ u8 brr;
+ u8 gtpr;
+ u8 rtor;
+ u8 rqr;
+ u8 isr;
+ u8 icr;
+ u8 rdr;
+ u8 tdr;
+};
+
+struct stm32_usart_config {
+ u8 uart_enable_bit; /* USART_CR1_UE */
+ bool has_7bits_data;
+};
+
+struct stm32_usart_info {
+ struct stm32_usart_offsets ofs;
+ struct stm32_usart_config cfg;
+};
+
+#define UNDEF_REG ~0
+
+/* Register offsets */
+struct stm32_usart_info stm32f4_info = {
+ .ofs = {
+ .isr = 0x00,
+ .rdr = 0x04,
+ .tdr = 0x04,
+ .brr = 0x08,
+ .cr1 = 0x0c,
+ .cr2 = 0x10,
+ .cr3 = 0x14,
+ .gtpr = 0x18,
+ .rtor = UNDEF_REG,
+ .rqr = UNDEF_REG,
+ .icr = UNDEF_REG,
+ },
+ .cfg = {
+ .uart_enable_bit = 13,
+ .has_7bits_data = false,
+ }
+};
+
+struct stm32_usart_info stm32f7_info = {
+ .ofs = {
+ .cr1 = 0x00,
+ .cr2 = 0x04,
+ .cr3 = 0x08,
+ .brr = 0x0c,
+ .gtpr = 0x10,
+ .rtor = 0x14,
+ .rqr = 0x18,
+ .isr = 0x1c,
+ .icr = 0x20,
+ .rdr = 0x24,
+ .tdr = 0x28,
+ },
+ .cfg = {
+ .uart_enable_bit = 0,
+ .has_7bits_data = true,
+ }
+};
+
+/* USART_SR (F4) / USART_ISR (F7) */
+#define USART_SR_PE BIT(0)
+#define USART_SR_FE BIT(1)
+#define USART_SR_NF BIT(2)
+#define USART_SR_ORE BIT(3)
+#define USART_SR_IDLE BIT(4)
+#define USART_SR_RXNE BIT(5)
+#define USART_SR_TC BIT(6)
+#define USART_SR_TXE BIT(7)
+#define USART_SR_LBD BIT(8)
+#define USART_SR_CTSIF BIT(9)
+#define USART_SR_CTS BIT(10) /* F7 */
+#define USART_SR_RTOF BIT(11) /* F7 */
+#define USART_SR_EOBF BIT(12) /* F7 */
+#define USART_SR_ABRE BIT(14) /* F7 */
+#define USART_SR_ABRF BIT(15) /* F7 */
+#define USART_SR_BUSY BIT(16) /* F7 */
+#define USART_SR_CMF BIT(17) /* F7 */
+#define USART_SR_SBKF BIT(18) /* F7 */
+#define USART_SR_TEACK BIT(21) /* F7 */
+#define USART_SR_ERR_MASK (USART_SR_LBD | USART_SR_ORE | \
+ USART_SR_FE | USART_SR_PE)
+/* Dummy bits */
+#define USART_SR_DUMMY_RX BIT(16)
+
+/* USART_DR */
+#define USART_DR_MASK GENMASK(8, 0)
+
+/* USART_BRR */
+#define USART_BRR_DIV_F_MASK GENMASK(3, 0)
+#define USART_BRR_DIV_M_MASK GENMASK(15, 4)
+#define USART_BRR_DIV_M_SHIFT 4
+
+/* USART_CR1 */
+#define USART_CR1_SBK BIT(0)
+#define USART_CR1_RWU BIT(1) /* F4 */
+#define USART_CR1_RE BIT(2)
+#define USART_CR1_TE BIT(3)
+#define USART_CR1_IDLEIE BIT(4)
+#define USART_CR1_RXNEIE BIT(5)
+#define USART_CR1_TCIE BIT(6)
+#define USART_CR1_TXEIE BIT(7)
+#define USART_CR1_PEIE BIT(8)
+#define USART_CR1_PS BIT(9)
+#define USART_CR1_PCE BIT(10)
+#define USART_CR1_WAKE BIT(11)
+#define USART_CR1_M BIT(12)
+#define USART_CR1_M0 BIT(12) /* F7 */
+#define USART_CR1_MME BIT(13) /* F7 */
+#define USART_CR1_CMIE BIT(14) /* F7 */
+#define USART_CR1_OVER8 BIT(15)
+#define USART_CR1_DEDT_MASK GENMASK(20, 16) /* F7 */
+#define USART_CR1_DEAT_MASK GENMASK(25, 21) /* F7 */
+#define USART_CR1_RTOIE BIT(26) /* F7 */
+#define USART_CR1_EOBIE BIT(27) /* F7 */
+#define USART_CR1_M1 BIT(28) /* F7 */
+#define USART_CR1_IE_MASK (GENMASK(8, 4) | BIT(14) | BIT(26) | BIT(27))
+
+/* USART_CR2 */
+#define USART_CR2_ADD_MASK GENMASK(3, 0) /* F4 */
+#define USART_CR2_ADDM7 BIT(4) /* F7 */
+#define USART_CR2_LBDL BIT(5)
+#define USART_CR2_LBDIE BIT(6)
+#define USART_CR2_LBCL BIT(8)
+#define USART_CR2_CPHA BIT(9)
+#define USART_CR2_CPOL BIT(10)
+#define USART_CR2_CLKEN BIT(11)
+#define USART_CR2_STOP_2B BIT(13)
+#define USART_CR2_STOP_MASK GENMASK(13, 12)
+#define USART_CR2_LINEN BIT(14)
+#define USART_CR2_SWAP BIT(15) /* F7 */
+#define USART_CR2_RXINV BIT(16) /* F7 */
+#define USART_CR2_TXINV BIT(17) /* F7 */
+#define USART_CR2_DATAINV BIT(18) /* F7 */
+#define USART_CR2_MSBFIRST BIT(19) /* F7 */
+#define USART_CR2_ABREN BIT(20) /* F7 */
+#define USART_CR2_ABRMOD_MASK GENMASK(22, 21) /* F7 */
+#define USART_CR2_RTOEN BIT(23) /* F7 */
+#define USART_CR2_ADD_F7_MASK GENMASK(31, 24) /* F7 */
+
+/* USART_CR3 */
+#define USART_CR3_EIE BIT(0)
+#define USART_CR3_IREN BIT(1)
+#define USART_CR3_IRLP BIT(2)
+#define USART_CR3_HDSEL BIT(3)
+#define USART_CR3_NACK BIT(4)
+#define USART_CR3_SCEN BIT(5)
+#define USART_CR3_DMAR BIT(6)
+#define USART_CR3_DMAT BIT(7)
+#define USART_CR3_RTSE BIT(8)
+#define USART_CR3_CTSE BIT(9)
+#define USART_CR3_CTSIE BIT(10)
+#define USART_CR3_ONEBIT BIT(11)
+#define USART_CR3_OVRDIS BIT(12) /* F7 */
+#define USART_CR3_DDRE BIT(13) /* F7 */
+#define USART_CR3_DEM BIT(14) /* F7 */
+#define USART_CR3_DEP BIT(15) /* F7 */
+#define USART_CR3_SCARCNT_MASK GENMASK(19, 17) /* F7 */
+
+/* USART_GTPR */
+#define USART_GTPR_PSC_MASK GENMASK(7, 0)
+#define USART_GTPR_GT_MASK GENMASK(15, 8)
+
+/* USART_RTOR */
+#define USART_RTOR_RTO_MASK GENMASK(23, 0) /* F7 */
+#define USART_RTOR_BLEN_MASK GENMASK(31, 24) /* F7 */
+
+/* USART_RQR */
+#define USART_RQR_ABRRQ BIT(0) /* F7 */
+#define USART_RQR_SBKRQ BIT(1) /* F7 */
+#define USART_RQR_MMRQ BIT(2) /* F7 */
+#define USART_RQR_RXFRQ BIT(3) /* F7 */
+#define USART_RQR_TXFRQ BIT(4) /* F7 */
+
+/* USART_ICR */
+#define USART_ICR_PECF BIT(0) /* F7 */
+#define USART_ICR_FFECF BIT(1) /* F7 */
+#define USART_ICR_NCF BIT(2) /* F7 */
+#define USART_ICR_ORECF BIT(3) /* F7 */
+#define USART_ICR_IDLECF BIT(4) /* F7 */
+#define USART_ICR_TCCF BIT(6) /* F7 */
+#define USART_ICR_LBDCF BIT(8) /* F7 */
+#define USART_ICR_CTSCF BIT(9) /* F7 */
+#define USART_ICR_RTOCF BIT(11) /* F7 */
+#define USART_ICR_EOBCF BIT(12) /* F7 */
+#define USART_ICR_CMCF BIT(17) /* F7 */
+
+#define STM32_SERIAL_NAME "ttyS"
+#define STM32_MAX_PORTS 6
+
+struct stm32_port {
+ struct uart_port port;
+ struct clk *clk;
+ struct stm32_usart_info *info;
+ bool hw_flow_control;
+};
+
+static struct stm32_port stm32_ports[STM32_MAX_PORTS];
+static struct uart_driver stm32_usart_driver;
--
1.9.1
More information about the linux-arm-kernel
mailing list