[PATCH 02/11] DOCUMENTATION: dt-bindings: Document the STM32 USART bindings

[Alexandre TORGUE]

This adds documentation of device tree bindings for the
STM32 USART

Signed-off-by: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue at st.com>

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
new file mode 100644
index 0000000..75b1400
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -0,0 +1,34 @@
+* STMicroelectronics STM32 USART
+
+Required properties:
+- compatible: Can be either "st,stm32-usart", "st,stm32-uart",
+"st,stm32f7-usart" or "st,stm32f7-uart" depending on whether
+the device supports synchronous mode and is compatible with
+stm32(f4) or stm32f7.
+- reg: The address and length of the peripheral registers space
+- interrupts: The interrupt line of the USART instance
+- clocks: The input clock of the USART instance
+
+Optional properties:
+- pinctrl: The reference on the pins configuration
+- st,hw-flow-ctrl: bool flag to enable hardware flow control.
+
+Examples:
+usart4: serial at 40004c00 {
+	compatible = "st,stm32-uart";
+	reg = <0x40004c00 0x400>;
+	interrupts = <52>;
+	clocks = <&clk_pclk1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart4>;
+};
+
+usart2: serial at 40004400 {
+	compatible = "st,stm32-usart", "st,stm32-uart";
+	reg = <0x40004400 0x400>;
+	interrupts = <38>;
+	clocks = <&clk_pclk1>;
+	st,hw-flow-ctrl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>;
+};
-- 
1.9.1