[PATCH 4/7] mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()

[Lee Jones]

Doesn't appear to be used.  No call sites exist.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/mfd/ab8500-debugfs.c | 54 --------------------------------------------
 1 file changed, 54 deletions(-)

diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 6c913c4..b948088 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -1374,60 +1374,6 @@ void ab8500_dump_all_banks(struct device *dev)
 	}
 }
 
-/* Space for 500 registers. */
-#define DUMP_MAX_REGS 700
-static struct ab8500_register_dump
-{
-	u8 bank;
-	u8 reg;
-	u8 value;
-} ab8500_complete_register_dump[DUMP_MAX_REGS];
-
-/* This shall only be called upon kernel panic! */
-void ab8500_dump_all_banks_to_mem(void)
-{
-	int i, r = 0;
-	u8 bank;
-	int err = 0;
-
-	pr_info("Saving all ABB registers for crash analysis.\n");
-
-	for (bank = 0; bank < AB8500_NUM_BANKS; bank++) {
-		for (i = 0; i < debug_ranges[bank].num_ranges; i++) {
-			u8 reg;
-
-			for (reg = debug_ranges[bank].range[i].first;
-			     reg <= debug_ranges[bank].range[i].last;
-			     reg++) {
-				u8 value;
-
-				err = prcmu_abb_read(bank, reg, &value, 1);
-
-				if (err < 0)
-					goto out;
-
-				ab8500_complete_register_dump[r].bank = bank;
-				ab8500_complete_register_dump[r].reg = reg;
-				ab8500_complete_register_dump[r].value = value;
-
-				r++;
-
-				if (r >= DUMP_MAX_REGS) {
-					pr_err("%s: too many register to dump!\n",
-						__func__);
-					err = -EINVAL;
-					goto out;
-				}
-			}
-		}
-	}
-out:
-	if (err >= 0)
-		pr_info("Saved all ABB registers.\n");
-	else
-		pr_info("Failed to save all ABB registers.\n");
-}
-
 static int ab8500_all_banks_open(struct inode *inode, struct file *file)
 {
 	struct seq_file *s;
-- 
2.9.3