[PATCH v3 14/14] ARM: DT: STi: STiH410: clock configuration to address 720p and 1080p

[Patrice Chotard]

On 08/29/2016 02:27 PM, gabriel.fernandez at st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez at st.com>
> 
> It is necessary to properly configure these clocks in order
> to address 720p and 1080p HDMI resolution.
> 
> Signed-off-by: Vincent Abriou <vincent.abriou at st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez at st.com>
> Acked-by: Peter Griffin <peter.griffin at linaro.org>
> ---
>  arch/arm/boot/dts/stih410.dtsi | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index 18ed1ad..7eec729 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -103,7 +103,10 @@
>  			#size-cells = <1>;
>  
>  			assigned-clocks	= <&clk_s_d2_quadfs 0>,
> -					  <&clk_s_d2_quadfs 0>,
> +					  <&clk_s_d2_quadfs 1>,
> +					  <&clk_s_c0_pll1 0>,
> +					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> +					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
>  					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
>  					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
>  					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
> @@ -113,14 +116,21 @@
>  
>  			assigned-clock-parents = <0>,
>  						 <0>,
> +						 <0>,
> +						 <&clk_s_c0_pll1 0>,
> +						 <&clk_s_c0_pll1 0>,
>  						 <&clk_s_d2_quadfs 0>,
> -						 <&clk_s_d2_quadfs 0>,
> +						 <&clk_s_d2_quadfs 1>,
>  						 <&clk_s_d2_quadfs 0>,
>  						 <&clk_s_d2_quadfs 0>,
>  						 <&clk_s_d2_quadfs 0>,
>  						 <&clk_s_d2_quadfs 0>;
>  
> -			assigned-clock-rates = <297000000>, <297000000>;
> +			assigned-clock-rates = <297000000>,
> +					       <108000000>,
> +					       <0>,
> +					       <400000000>,
> +					       <400000000>;
>  
>  			ranges;
>  
> 
Hi Gabriel

Applied on STi tree for v4.9

Thanks