[PATCH v2 3/6] phy: meson: add USB2 PHY support for Meson8b and GXBB
Kevin Hilman
khilman at baylibre.com
Wed Sep 14 09:06:57 PDT 2016
Kishon,
Martin Blumenstingl <martin.blumenstingl at googlemail.com> writes:
> This is a new driver for the USB PHY found in Meson8b and GXBB SoCs.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> Tested-by: Kevin Hilman <khilman at baylibre.com>
Will you be picking this up for v4.9?
Kevin
> ---
> drivers/phy/Kconfig | 11 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-meson-usb2.c | 280 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 292 insertions(+)
> create mode 100644 drivers/phy/phy-meson-usb2.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 19bff3a..6ad87ec 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -453,4 +453,15 @@ config PHY_NS2_PCIE
> help
> Enable this to support the Broadcom Northstar2 PCIe PHY.
> If unsure, say N.
> +
> +config PHY_MESON_USB2
> + tristate "Meson USB2 PHY driver"
> + default ARCH_MESON
> + depends on OF && (ARCH_MESON || COMPILE_TEST)
> + select GENERIC_PHY
> + help
> + Enable this to support the Meson USB2 PHYs found in Meson8b
> + and GXBB SoCs.
> + If unsure, say N.
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 90ae198..dd507ac 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -56,3 +56,4 @@ obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
> obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
> obj-$(CONFIG_ARCH_TEGRA) += tegra/
> obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
> +obj-$(CONFIG_PHY_MESON_USB2) += phy-meson-usb2.o
> diff --git a/drivers/phy/phy-meson-usb2.c b/drivers/phy/phy-meson-usb2.c
> new file mode 100644
> index 0000000..eece521
> --- /dev/null
> +++ b/drivers/phy/phy-meson-usb2.c
> @@ -0,0 +1,280 @@
> +/*
> + * Meson USB2 PHY driver
> + *
> + * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/reset.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/of.h>
> +
> +#define REG_CONFIG 0x00
> + #define REG_CONFIG_CLK_EN BIT(0)
> + #define REG_CONFIG_CLK_SEL_MASK GENMASK(3, 1)
> + #define REG_CONFIG_CLK_DIV_MASK GENMASK(10, 4)
> + #define REG_CONFIG_CLK_32k_ALTSEL BIT(15)
> + #define REG_CONFIG_TEST_TRIG BIT(31)
> +
> +#define REG_CTRL 0x04
> + #define REG_CTRL_SOFT_PRST BIT(0)
> + #define REG_CTRL_SOFT_HRESET BIT(1)
> + #define REG_CTRL_SS_SCALEDOWN_MODE_MASK GENMASK(3, 2)
> + #define REG_CTRL_CLK_DET_RST BIT(4)
> + #define REG_CTRL_INTR_SEL BIT(5)
> + #define REG_CTRL_CLK_DETECTED BIT(8)
> + #define REG_CTRL_SOF_SENT_RCVD_TGL BIT(9)
> + #define REG_CTRL_SOF_TOGGLE_OUT BIT(10)
> + #define REG_CTRL_POWER_ON_RESET BIT(15)
> + #define REG_CTRL_SLEEPM BIT(16)
> + #define REG_CTRL_TX_BITSTUFF_ENN_H BIT(17)
> + #define REG_CTRL_TX_BITSTUFF_ENN BIT(18)
> + #define REG_CTRL_COMMON_ON BIT(19)
> + #define REG_CTRL_REF_CLK_SEL_MASK GENMASK(21, 20)
> + #define REG_CTRL_REF_CLK_SEL_SHIFT 20
> + #define REG_CTRL_FSEL_MASK GENMASK(24, 22)
> + #define REG_CTRL_FSEL_SHIFT 22
> + #define REG_CTRL_PORT_RESET BIT(25)
> + #define REG_CTRL_THREAD_ID_MASK GENMASK(31, 26)
> +
> +#define REG_ENDP_INTR 0x08
> +
> +/* bits [31:26], [24:21] and [15:3] seem to be read-only */
> +#define REG_ADP_BC 0x0c
> + #define REG_ADP_BC_VBUS_VLD_EXT_SEL BIT(0)
> + #define REG_ADP_BC_VBUS_VLD_EXT BIT(1)
> + #define REG_ADP_BC_OTG_DISABLE BIT(2)
> + #define REG_ADP_BC_ID_PULLUP BIT(3)
> + #define REG_ADP_BC_DRV_VBUS BIT(4)
> + #define REG_ADP_BC_ADP_PRB_EN BIT(5)
> + #define REG_ADP_BC_ADP_DISCHARGE BIT(6)
> + #define REG_ADP_BC_ADP_CHARGE BIT(7)
> + #define REG_ADP_BC_SESS_END BIT(8)
> + #define REG_ADP_BC_DEVICE_SESS_VLD BIT(9)
> + #define REG_ADP_BC_B_VALID BIT(10)
> + #define REG_ADP_BC_A_VALID BIT(11)
> + #define REG_ADP_BC_ID_DIG BIT(12)
> + #define REG_ADP_BC_VBUS_VALID BIT(13)
> + #define REG_ADP_BC_ADP_PROBE BIT(14)
> + #define REG_ADP_BC_ADP_SENSE BIT(15)
> + #define REG_ADP_BC_ACA_ENABLE BIT(16)
> + #define REG_ADP_BC_DCD_ENABLE BIT(17)
> + #define REG_ADP_BC_VDAT_DET_EN_B BIT(18)
> + #define REG_ADP_BC_VDAT_SRC_EN_B BIT(19)
> + #define REG_ADP_BC_CHARGE_SEL BIT(20)
> + #define REG_ADP_BC_CHARGE_DETECT BIT(21)
> + #define REG_ADP_BC_ACA_PIN_RANGE_C BIT(22)
> + #define REG_ADP_BC_ACA_PIN_RANGE_B BIT(23)
> + #define REG_ADP_BC_ACA_PIN_RANGE_A BIT(24)
> + #define REG_ADP_BC_ACA_PIN_GND BIT(25)
> + #define REG_ADP_BC_ACA_PIN_FLOAT BIT(26)
> +
> +#define REG_DBG_UART 0x14
> +
> +#define REG_TEST 0x18
> + #define REG_TEST_DATA_IN_MASK GENMASK(3, 0)
> + #define REG_TEST_EN_MASK GENMASK(7, 4)
> + #define REG_TEST_ADDR_MASK GENMASK(11, 8)
> + #define REG_TEST_DATA_OUT_SEL BIT(12)
> + #define REG_TEST_CLK BIT(13)
> + #define REG_TEST_VA_TEST_EN_B_MASK GENMASK(15, 14)
> + #define REG_TEST_DATA_OUT_MASK GENMASK(19, 16)
> + #define REG_TEST_DISABLE_ID_PULLUP BIT(20)
> +
> +#define REG_TUNE 0x1c
> + #define REG_TUNE_TX_RES_TUNE_MASK GENMASK(1, 0)
> + #define REG_TUNE_TX_HSXV_TUNE_MASK GENMASK(3, 2)
> + #define REG_TUNE_TX_VREF_TUNE_MASK GENMASK(7, 4)
> + #define REG_TUNE_TX_RISE_TUNE_MASK GENMASK(9, 8)
> + #define REG_TUNE_TX_PREEMP_PULSE_TUNE BIT(10)
> + #define REG_TUNE_TX_PREEMP_AMP_TUNE_MASK GENMASK(12, 11)
> + #define REG_TUNE_TX_FSLS_TUNE_MASK GENMASK(16, 13)
> + #define REG_TUNE_SQRX_TUNE_MASK GENMASK(19, 17)
> + #define REG_TUNE_OTG_TUNE GENMASK(22, 20)
> + #define REG_TUNE_COMP_DIS_TUNE GENMASK(25, 23)
> + #define REG_TUNE_HOST_DM_PULLDOWN BIT(26)
> + #define REG_TUNE_HOST_DP_PULLDOWN BIT(27)
> +
> +#define RESET_COMPLETE_TIME 500
> +#define ACA_ENABLE_COMPLETE_TIME 50
> +
> +struct phy_meson_usb2_priv {
> + void __iomem *regs;
> + enum usb_dr_mode dr_mode;
> + struct clk *clk_usb_general;
> + struct clk *clk_usb;
> +};
> +
> +static u32 phy_meson_usb2_read(struct phy_meson_usb2_priv *phy_priv, u32 reg)
> +{
> + return readl(phy_priv->regs + reg);
> +}
> +
> +static void phy_meson_usb2_mask_bits(struct phy_meson_usb2_priv *phy_priv,
> + u32 reg, u32 mask, u32 value)
> +{
> + u32 data;
> +
> + data = phy_meson_usb2_read(phy_priv, reg);
> + data &= ~mask;
> + data |= (value & mask);
> +
> + writel(data, phy_priv->regs + reg);
> +}
> +
> +static int phy_meson_usb2_power_on(struct phy *phy)
> +{
> + struct phy_meson_usb2_priv *priv = phy_get_drvdata(phy);
> + int ret;
> +
> + ret = clk_prepare_enable(priv->clk_usb_general);
> + if (ret) {
> + dev_err(&phy->dev, "Failed to enable USB general clock\n");
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(priv->clk_usb);
> + if (ret) {
> + dev_err(&phy->dev, "Failed to enable USB DDR clock\n");
> + return ret;
> + }
> +
> + phy_meson_usb2_mask_bits(priv, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
> + REG_CONFIG_CLK_32k_ALTSEL);
> +
> + phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
> + 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
> +
> + phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_FSEL_MASK,
> + 0x5 << REG_CTRL_FSEL_SHIFT);
> +
> + /* reset the PHY */
> + phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET,
> + REG_CTRL_POWER_ON_RESET);
> + udelay(RESET_COMPLETE_TIME);
> + phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0);
> + udelay(RESET_COMPLETE_TIME);
> +
> + phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT,
> + REG_CTRL_SOF_TOGGLE_OUT);
> +
> + if (priv->dr_mode == USB_DR_MODE_HOST) {
> + phy_meson_usb2_mask_bits(priv, REG_ADP_BC,
> + REG_ADP_BC_ACA_ENABLE,
> + REG_ADP_BC_ACA_ENABLE);
> +
> + udelay(ACA_ENABLE_COMPLETE_TIME);
> +
> + if (phy_meson_usb2_read(priv, REG_ADP_BC) &
> + REG_ADP_BC_ACA_PIN_FLOAT) {
> + dev_warn(&phy->dev, "USB ID detect failed!\n");
> + return -EINVAL;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int phy_meson_usb2_power_off(struct phy *phy)
> +{
> + struct phy_meson_usb2_priv *priv = phy_get_drvdata(phy);
> +
> + clk_disable_unprepare(priv->clk_usb);
> + clk_disable_unprepare(priv->clk_usb_general);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops phy_meson_usb2_ops = {
> + .power_on = phy_meson_usb2_power_on,
> + .power_off = phy_meson_usb2_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int phy_meson_usb2_probe(struct platform_device *pdev)
> +{
> + struct phy_meson_usb2_priv *priv;
> + struct resource *res;
> + struct phy *phy;
> + struct phy_provider *phy_provider;
> + int ret;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->regs))
> + return PTR_ERR(priv->regs);
> +
> + priv->clk_usb_general = devm_clk_get(&pdev->dev, "usb_general");
> + if (IS_ERR(priv->clk_usb_general))
> + return PTR_ERR(priv->clk_usb_general);
> +
> + priv->clk_usb = devm_clk_get(&pdev->dev, "usb");
> + if (IS_ERR(priv->clk_usb))
> + return PTR_ERR(priv->clk_usb);
> +
> + priv->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
> + if (priv->dr_mode == USB_DR_MODE_UNKNOWN) {
> + dev_err(&pdev->dev,
> + "missing dual role configuration of the controller\n");
> + return -EINVAL;
> + }
> +
> + phy = devm_phy_create(&pdev->dev, NULL, &phy_meson_usb2_ops);
> + if (IS_ERR(phy)) {
> + dev_err(&pdev->dev, "failed to create PHY\n");
> + return PTR_ERR(phy);
> + }
> +
> + /*
> + * No actual error check here because the hardware only has one reset
> + * line for both PHYs. Using a shared reset is not possible because we
> + * must call reset_control_reset to trigger the reset (which is not
> + * allowed for shared resets in the reset framework).
> + */
> + ret = device_reset_optional(&pdev->dev);
> + if (ret == -EPROBE_DEFER)
> + return ret;
> +
> + phy_set_drvdata(phy, priv);
> +
> + phy_provider =
> + devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id phy_meson_usb2_of_match[] = {
> + { .compatible = "amlogic,meson8b-usb2-phy", },
> + { .compatible = "amlogic,meson-gxbb-usb2-phy", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, phy_meson_usb2_of_match);
> +
> +static struct platform_driver phy_meson_usb2_driver = {
> + .probe = phy_meson_usb2_probe,
> + .driver = {
> + .name = "phy-meson-usb2",
> + .of_match_table = phy_meson_usb2_of_match,
> + },
> +};
> +module_platform_driver(phy_meson_usb2_driver);
> +
> +MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl at googlemail.com>");
> +MODULE_DESCRIPTION("Meson USB2 PHY driver");
> +MODULE_LICENSE("GPL");
More information about the linux-arm-kernel
mailing list