[PATCH v9 06/19] ARM: STi: DT: STiH407: Add FDMA driver dt nodes.

Patrice Chotard patrice.chotard at st.com
Wed Sep 14 04:59:39 PDT 2016


Hi Peter

On 09/05/2016 03:16 PM, Peter Griffin wrote:
> These nodes are required to get the fdma driver working
> on STiH407 based silicon.
> 
> Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
> Acked-by: Lee Jones <lee.jones at linaro.org>
> ---
>  arch/arm/boot/dts/stih407-family.dtsi | 52 +++++++++++++++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index d294e82..45cab30 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -821,5 +821,57 @@
>  			clock-frequency	= <600000000>;
>  			st,syscfg	= <&syscfg_core 0x224>;
>  		};
> +
> +		/* fdma audio */
> +		fdma0: dma-controller at 8e20000 {
> +			compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
> +			reg = <0x8e20000 0x8000>,
> +			      <0x8e30000 0x3000>,
> +			      <0x8e37000 0x1000>,
> +			      <0x8e38000 0x8000>;
> +			reg-names = "slimcore", "dmem", "peripherals", "imem";
> +			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
> +				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
> +				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
> +				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
> +			dma-channels = <16>;
> +			#dma-cells = <3>;
> +		};
> +
> +		/* fdma app */
> +		fdma1: dma-controller at 8e40000 {
> +			compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
> +			reg = <0x8e40000 0x8000>,
> +			      <0x8e50000 0x3000>,
> +			      <0x8e57000 0x1000>,
> +			      <0x8e58000 0x8000>;
> +			reg-names = "slimcore", "dmem", "peripherals", "imem";
> +			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
> +				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
> +				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
> +				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +
> +			interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
> +			dma-channels = <16>;
> +			#dma-cells = <3>;
> +		};
> +
> +		/* fdma free running */
> +		fdma2: dma-controller at 8e60000 {
> +			compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
> +			reg = <0x8e60000 0x8000>,
> +			      <0x8e70000 0x3000>,
> +			      <0x8e77000 0x1000>,
> +			      <0x8e78000 0x8000>;
> +			reg-names = "slimcore", "dmem", "peripherals", "imem";
> +			interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
> +			dma-channels = <16>;
> +			#dma-cells = <3>;
> +			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
> +				<&clk_s_c0_flexgen CLK_EXT2F_A9>,
> +				<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
> +				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +		};
>  	};
>  };
> 

Applied for STi next

Thanks



More information about the linux-arm-kernel mailing list