[PATCH] usb: chipidea: Properly mark little endian descriptors

Stephen Boyd stephen.boyd at linaro.org
Tue Sep 13 16:06:31 PDT 2016


The DMA descriptors are little endian, and we do a pretty good
job of handling them with the proper le32_to_cpu() markings, but
we don't actually mark them as __le32. This means checkers like
sparse can't easily find new bugs. Let's mark the members of
structures properly and fix the few places where we're missing
conversions.

Cc: Peter Chen <peter.chen at nxp.com>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd at linaro.org>
---
 drivers/usb/chipidea/udc.c |  6 +++---
 drivers/usb/chipidea/udc.h | 12 ++++++------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 6acf4dba395e..61a65d1d05f2 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -364,7 +364,7 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
 		if (hwreq->req.length == 0
 				|| hwreq->req.length % hwep->ep.maxpacket)
 			mul++;
-		node->ptr->token |= mul << __ffs(TD_MULTO);
+		node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO));
 	}
 
 	temp = (u32) (hwreq->req.dma + hwreq->req.actual);
@@ -503,7 +503,7 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 		if (hwreq->req.length == 0
 				|| hwreq->req.length % hwep->ep.maxpacket)
 			mul++;
-		hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
+		hwep->qh.ptr->cap |= cpu_to_le32(mul << __ffs(QH_MULT));
 	}
 
 	wmb();   /* synchronize before ep prime */
@@ -530,7 +530,7 @@ static void free_pending_td(struct ci_hw_ep *hwep)
 static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
 					   struct td_node *node)
 {
-	hwep->qh.ptr->td.next = node->dma;
+	hwep->qh.ptr->td.next = cpu_to_le32(node->dma);
 	hwep->qh.ptr->td.token &=
 		cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
 
diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
index e66df0020bd4..2ecd1174d66c 100644
--- a/drivers/usb/chipidea/udc.h
+++ b/drivers/usb/chipidea/udc.h
@@ -22,11 +22,11 @@
 /* DMA layout of transfer descriptors */
 struct ci_hw_td {
 	/* 0 */
-	u32 next;
+	__le32 next;
 #define TD_TERMINATE          BIT(0)
 #define TD_ADDR_MASK          (0xFFFFFFEUL << 5)
 	/* 1 */
-	u32 token;
+	__le32 token;
 #define TD_STATUS             (0x00FFUL <<  0)
 #define TD_STATUS_TR_ERR      BIT(3)
 #define TD_STATUS_DT_ERR      BIT(5)
@@ -36,7 +36,7 @@ struct ci_hw_td {
 #define TD_IOC                BIT(15)
 #define TD_TOTAL_BYTES        (0x7FFFUL << 16)
 	/* 2 */
-	u32 page[5];
+	__le32 page[5];
 #define TD_CURR_OFFSET        (0x0FFFUL <<  0)
 #define TD_FRAME_NUM          (0x07FFUL <<  0)
 #define TD_RESERVED_MASK      (0x0FFFUL <<  0)
@@ -45,18 +45,18 @@ struct ci_hw_td {
 /* DMA layout of queue heads */
 struct ci_hw_qh {
 	/* 0 */
-	u32 cap;
+	__le32 cap;
 #define QH_IOS                BIT(15)
 #define QH_MAX_PKT            (0x07FFUL << 16)
 #define QH_ZLT                BIT(29)
 #define QH_MULT               (0x0003UL << 30)
 #define QH_ISO_MULT(x)		((x >> 11) & 0x03)
 	/* 1 */
-	u32 curr;
+	__le32 curr;
 	/* 2 - 8 */
 	struct ci_hw_td		td;
 	/* 9 */
-	u32 RESERVED;
+	__le32 RESERVED;
 	struct usb_ctrlrequest   setup;
 } __attribute__ ((packed, aligned(4)));
 
-- 
2.9.0.rc2.8.ga28705d




More information about the linux-arm-kernel mailing list