[PATCH 0/4] ARM: boot: mxs: Add On-Chip RAM
Stefan Wahren
stefan.wahren at i2se.com
Tue Sep 13 10:51:02 PDT 2016
The i.MX23 / i.MX28 have a small amount of On-Chip RAM which is also necessary
for suspend to RAM and standby mode. But before we need to remove the fake reg
properties of all internal bus nodes as discussed in this thread [1].
This patch series requires Fabio Estevam's recent series "ARM: dts: imx23:
Remove skeleton.dtsi inclusion" [2].
[1] - https://marc.info/?l=devicetree&m=146139948426520&w=2
[2] - http://www.spinics.net/lists/arm-kernel/msg528974.html
Stefan Wahren (4):
ARM: dts: imx23: Remove fake "reg" properties from bus nodes
ARM: dts: imx28: Remove fake "reg" properties from bus nodes
ARM: dts: imx23: add On-Chip RAM
ARM: dts: imx28: add On-Chip RAM
arch/arm/boot/dts/imx23-evk.dts | 8 ++++----
arch/arm/boot/dts/imx23-olinuxino.dts | 8 ++++----
arch/arm/boot/dts/imx23-sansa.dts | 8 ++++----
arch/arm/boot/dts/imx23-stmp378x_devb.dts | 6 +++---
arch/arm/boot/dts/imx23-xfi3.dts | 8 ++++----
arch/arm/boot/dts/imx23.dtsi | 15 +++++++++------
arch/arm/boot/dts/imx28-apf28.dts | 8 ++++----
arch/arm/boot/dts/imx28-apf28dev.dts | 8 ++++----
arch/arm/boot/dts/imx28-apx4devkit.dts | 8 ++++----
arch/arm/boot/dts/imx28-cfa10036.dts | 8 ++++----
arch/arm/boot/dts/imx28-cfa10037.dts | 8 ++++----
arch/arm/boot/dts/imx28-cfa10049.dts | 10 +++++-----
arch/arm/boot/dts/imx28-cfa10055.dts | 6 +++---
arch/arm/boot/dts/imx28-cfa10056.dts | 4 ++--
arch/arm/boot/dts/imx28-cfa10057.dts | 10 +++++-----
arch/arm/boot/dts/imx28-cfa10058.dts | 10 +++++-----
arch/arm/boot/dts/imx28-duckbill.dts | 8 ++++----
arch/arm/boot/dts/imx28-evk.dts | 8 ++++----
arch/arm/boot/dts/imx28-m28.dtsi | 6 +++---
arch/arm/boot/dts/imx28-m28cu3.dts | 8 ++++----
arch/arm/boot/dts/imx28-m28evk.dts | 8 ++++----
arch/arm/boot/dts/imx28-sps1.dts | 8 ++++----
arch/arm/boot/dts/imx28.dtsi | 17 +++++++++--------
23 files changed, 100 insertions(+), 96 deletions(-)
--
1.7.9.5
More information about the linux-arm-kernel
mailing list