[PATCH v1 2/2] arm64: dts: rockchip: Add PX5 Evaluation board
Andreas Färber
afaerber at suse.de
Tue Sep 13 05:23:35 PDT 2016
Hi,
Am 10.09.2016 um 19:47 schrieb Andy Yan:
> PX5 EVB is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/CSI/LVDS
> HDMI video input/output interface, audio codec ES8396,
> WIFI/BT(on RTL8723BS), Gsensor BMA250E and light&proximity
> sensor STK3410.
>
> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
Most comments from PX3 1/2 apply here, too.
> ---
>
> Changes in v1:
> - board rename
> - add vendor prefix for i2c interfaced devices
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 304 +++++++++++++++++++++
> 3 files changed, 309 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 6da3881..b6f92d6 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -107,6 +107,10 @@ Rockchip platforms device tree bindings
> Required root node properties:
> - compatible = "rockchip,r88", "rockchip,rk3368";
>
> +- Rockchip PX5 Evaluation board:
> + Required root node properties:
> + - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> +
> - Rockchip RK3228 Evaluation board:
> Required root node properties:
> - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 7037a16..86c74b2 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -1,6 +1,7 @@
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
There is no PX5 listed on your English website (yet), but given that you
have your own rockchip/ folder for arm64 I would encourage you to rename
to px5-evb.dtb independent of any internal heritage or compatibility the
SoC has. Compare apq/ipq/msm in qcom.
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
>
> always := $(dtb-y)
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> new file mode 100644
> index 0000000..be0e915
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
> @@ -0,0 +1,304 @@
> +/*
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "rk3368.dtsi"
Similarly suggest a px5.dtsi here.
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "Rockchip PX5 EVB";
> + compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
> +
> + chosen {
> + stdout-path = "serial4:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + keys: gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwr_key>;
> +
> + power {
> + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> + label = "GPIO Power";
> + linux,code = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + vcc_sys: vcc-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&emmc {
> + status = "okay";
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + clock-frequency = <150000000>;
> + disable-wp;
> + keep-power-in-suspend;
> + non-removable;
> + num-slots = <1>;
> + vmmc-supply = <&vcc_io>;
> + vqmmc-supply = <&vcc18_flash>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + rk808: pmic at 1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + rockchip,system-power-controller;
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc6-supply = <&vcc_sys>;
> + vcc7-supply = <&vcc_sys>;
> + vcc8-supply = <&vcc_io>;
> + vcc9-supply = <&vcc_sys>;
> + vcc10-supply = <&vcc_sys>;
> + vcc11-supply = <&vcc_sys>;
> + vcc12-supply = <&vcc_io>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> + #clock-cells = <1>;
> +
> + regulators {
> + vdd_cpu: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_cpu";
> + };
> +
> + vdd_log: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_log";
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_io";
> + };
> +
> + vcc18_flash: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_flash";
> + };
> +
> + vcca_33: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcca_33";
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd_10";
> + };
> +
> + avdd_33: LDO_REG4 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "avdd_33";
> + };
> +
> + vccio_sd: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vccio_sd";
> + };
> +
> + vdd10_lcd: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd10_lcd";
> + };
> +
> + vcc_18: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_18";
> + };
> +
> + vcc18_lcd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_lcd";
> + };
> +
> + vcc_sd: SWITCH_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_sd";
> + };
> +
> + vcc33_lcd: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc33_lcd";
> + };
> + };
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + /* Accelerometer */
> + bma250 at 18 {
> + compatible = "bosch,bma250";
> + reg = <0x18>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + stk3410 at 48 {
> + compatible = "sensortek,STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + gsl1680: touchscreen at 40 {
> + compatible = "silead,gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <1280>;
> + silead,max-fingers = <5>;
> + };
> +};
> +
> +&pinctrl {
> +
Drop white line?
> + keys {
> + pwr_key: pwr-key {
> + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_sleep: pmic-sleep {
> + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
> + };
> +
> + pmic_int: pmic-int {
> + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +};
> +
> +&tsadc {
> + status = "okay";
> + rockchip,hw-tshut-mode = <0>; /* CRU */
> + rockchip,hw-tshut-polarity = <1>; /* high */
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
Otherwise formally looks fine.
Cheers,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
More information about the linux-arm-kernel
mailing list