[PATCH v2 1/3] Documentation: dtb: xgene: Add PMD clock binding

[Hoan Tran]

On Mon, Sep 12, 2016 at 8:37 AM, Rob Herring <robh at kernel.org> wrote:
> On Fri, Sep 02, 2016 at 05:40:53PM -0700, Hoan Tran wrote:
>> Add APM X-Gene clock binding documentation for PMD clock.
>>
>> Signed-off-by: Hoan Tran <hotran at apm.com>
>> ---
>>  Documentation/devicetree/bindings/clock/xgene.txt | 18 ++++++++++++++++++
>>  1 file changed, 18 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt
>> index 82f9638..e6e12ae 100644
>> --- a/Documentation/devicetree/bindings/clock/xgene.txt
>> +++ b/Documentation/devicetree/bindings/clock/xgene.txt
>> @@ -8,6 +8,7 @@ Required properties:
>>  - compatible : shall be one of the following:
>>       "apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
>>       "apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
>> +     "apm,xgene-pmd-clock" - for a X-Gene PMD clock
>>       "apm,xgene-device-clock" - for a X-Gene device clock
>>       "apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
>>       "apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
>> @@ -22,6 +23,15 @@ Required properties for SoC or PCP PLL clocks:
>>  Optional properties for PLL clocks:
>>  - clock-names : shall be the name of the PLL. If missing, use the device name.
>>
>> +Required properties for PMD clocks:
>> +- reg : shall be the physical register address for the pmd clock.
>> +- clocks : shall be the input parent clock phandle for the clock.
>> +- #clock-cells : shall be set to 1.
>> +- clock-output-names : shall be the name of the clock referenced by derive
>> +  clock.
>> +Optional properties for PLL clocks:
>> +- clock-names : shall be the name of the clock. If missing, use the device name.
>> +
>>  Required properties for device clocks:
>>  - reg : shall be a list of address and length pairs describing the CSR
>>           reset and/or the divider. Either may be omitted, but at least
>> @@ -59,6 +69,14 @@ For example:
>>               type = <0>;
>>       };
>>
>> +     pmd0clk: pmd0clk {
>
> Needs a unit address.
>
>> +             compatible = "apm,xgene-pmd-clock";
>> +             #clock-cells = <1>;
>> +             clocks = <&pmdpll 0>;
>> +             reg = <0x0 0x7E200200 0x0 0x10>;
>
> Lowercase hex please.
>
> With those,
>
> Acked-by: Rob Herring <robh at kernel.org>

Thanks, Rob ! I'll send another version soon.

Regards
Hoan

>
>
>> +             clock-output-names = "pmd0clk";
>> +     };
>> +
>>       socpll: socpll at 17000120 {
>>               compatible = "apm,xgene-socpll-clock";
>>               #clock-cells = <1>;
>> --
>> 1.9.1
>>