[PATCH v2 4/4] ARM: dts: imx28: Fix build warnings with W=1

[Shawn Guo]

On Fri, Sep 09, 2016 at 09:14:41AM +0200, Lothar Waßmann wrote:
> Hi,
> 
> On Thu, 8 Sep 2016 22:03:38 +0800 Shawn Guo wrote:
> > On Mon, Sep 05, 2016 at 04:27:50PM -0300, Fabio Estevam wrote:
> > > diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
> > > index 0ebbc83..b4d4dbb 100644
> > > --- a/arch/arm/boot/dts/imx28-tx28.dts
> > > +++ b/arch/arm/boot/dts/imx28-tx28.dts
> > > @@ -35,7 +35,8 @@
> > >  		usbotg = &usb0;
> > >  	};
> > >  
> > > -	memory {
> > > +	memory at 0 {
> > > +		device_type = "memory";
> > >  		reg = <0 0>; /* will be filled in by U-Boot */
> > 
> > I'm curious to know if the unit-address will be fixed up or not when
> > 'reg' property gets updated by U-Boot.
> > 
> No. U-Boot does not change the unit name, when updating in the reg
> property. But that does not do any harm (for now), thus the change is
> OK.

This is confusing when people is looking at nodes in /proc/device-tree.
Why cannot we give it a reasonable default configuration instead of
<0 0>?

Shawn