[PATCH 8/8] ARM: pxa/lubbock: add pcmcia clock

[Robert Jarzmik]

Russell King - ARM Linux <linux at armlinux.org.uk> writes:

> On Tue, Sep 06, 2016 at 07:17:09PM +0200, Robert Jarzmik wrote:
>> Russell King <rmk+kernel at armlinux.org.uk> writes:
>> 
>> > Add the required PCMCIA clock for the SA1111 "1800" device.  This clock
>> > is used to compute timing information for the PCMCIA interface in the
>> > SoC device, rather than the SA1111.  Hence, the provision of this clock
>> > is a convenience for the driver and does not reflect the hardware, so
>> > this must not be copied into DT.
>> >
>> > Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
>> Acked-by: Robert Jarzmik <robert.jarzmik at free.fr>
>> But more importantly:
>> Tested-by: Robert Jarzmik <robert.jarzmik at free.fr>
>
> Thanks Robert.  I guess no one else is be interested in these patches,
> so I'm going to drop them into -next today, and send them on Friday or
> over this weekend.

Great !!!!

I'll keep the irq_get_chip() workaround in my private tree for now so that my
automated testing farm can also test the compact flash card. And yes, /dev/hda1
appeared on my lubbock, with a good old MSDOS filesystem :))))

Thanks for the time taken for explanations, I appreciated.

Cheers.

-- 
Robert