[PATCH v3 7/9] ARM: dts: sun8i: Enable sun8i-emac on the Orange PI One
Corentin Labbe
clabbe.montjoie at gmail.com
Fri Sep 9 05:45:15 PDT 2016
From: Hans de Goede <hdegoede at redhat.com>
The sun8i-emac hardware is present on the Orange PI One.
It uses the internal PHY.
This patch create the needed emac and phy nodes.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
Signed-off-by: Corentin Labbe <clabbe.montjoie at gmail.com>
---
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 0adf932..0bc3867 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -94,6 +94,16 @@
status = "okay";
};
+&emac {
+ phy = <&phy1>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
--
2.7.3
More information about the linux-arm-kernel
mailing list