[PATCH] phy: sun4i-usb: Use spinlock to guard phyctl register access

Chen-Yu Tsai wens at csie.org
Thu Sep 8 03:24:24 PDT 2016


On Thu, Sep 8, 2016 at 6:16 PM, Hans de Goede <hdegoede at redhat.com> wrote:
> Hi,
>
>
> On 08-09-16 05:14, Chen-Yu Tsai wrote:
>>
>> The musb driver calls into this phy driver to disable/enable squelch
>> detection. This function was introduced in 24fe86a617c5 ("phy: sun4i-usb:
>> Add a sunxi specific function for setting squelch-detect"). This
>> function in turn calls sun4i_usb_phy_write, which uses a mutex to
>> guard the common access register. Unfortunately musb does this
>> in atomic context, which results in the following warning with lock
>> debugging enabled:
>>
>> BUG: sleeping function called from invalid context at
>> kernel/locking/mutex.c:97
>> in_atomic(): 1, irqs_disabled(): 128, pid: 96, name: kworker/0:2
>> CPU: 0 PID: 96 Comm: kworker/0:2 Not tainted 4.8.0-rc4-00181-gd502f8ad1c3e
>> #13
>> Hardware name: Allwinner sun8i Family
>> Workqueue: events musb_deassert_reset
>> [<c010bc01>] (unwind_backtrace) from [<c0109237>] (show_stack+0xb/0xc)
>> [<c0109237>] (show_stack) from [<c02a669b>] (dump_stack+0x67/0x74)
>> [<c02a669b>] (dump_stack) from [<c05d68c9>] (mutex_lock+0x15/0x2c)
>> [<c05d68c9>] (mutex_lock) from [<c02c3589>]
>> (sun4i_usb_phy_write+0x39/0xec)
>> [<c02c3589>] (sun4i_usb_phy_write) from [<c03e6327>]
>> (musb_port_reset+0xfb/0x184)
>> [<c03e6327>] (musb_port_reset) from [<c03e4917>]
>> (musb_deassert_reset+0x1f/0x2c)
>> [<c03e4917>] (musb_deassert_reset) from [<c012ecb5>]
>> (process_one_work+0x129/0x2b8)
>> [<c012ecb5>] (process_one_work) from [<c012f5e3>]
>> (worker_thread+0xf3/0x424)
>> [<c012f5e3>] (worker_thread) from [<c0132dbd>] (kthread+0xa1/0xb8)
>> [<c0132dbd>] (kthread) from [<c0105f31>] (ret_from_fork+0x11/0x20)
>>
>> Since the register access is mmio, we can use a spinlock to guard this
>> specific access, rather than the mutex that guards the entire phy.
>>
>> Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy")
>> Cc: Hans de Goede <hdegoede at redhat.com>
>> Cc: stable at vger.kernel.org
>> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
>
>
> Good catch, but you're actually replacing the locking calls in the only
> user of sun4i_usb_phy_data.mutex, so after your patch it is no longer
> used anywhere. Can you do a v2 just outright replacing it with a
> spinlock please ?

Ah. I misread the other use of mutex_lock, which is actually using
the mutex in struct phy. Sure I'll just replace it.

After sending this patch I wondered if I should have used
spin_lock_irqsave though.

ChenYu

>
> Thanks,
>
> Hans
>
>
>
>
>> ---
>>  drivers/phy/phy-sun4i-usb.c | 8 ++++++--
>>  1 file changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
>> index fcf4d95ecc6d..ae4ac5457c64 100644
>> --- a/drivers/phy/phy-sun4i-usb.c
>> +++ b/drivers/phy/phy-sun4i-usb.c
>> @@ -40,6 +40,7 @@
>>  #include <linux/power_supply.h>
>>  #include <linux/regulator/consumer.h>
>>  #include <linux/reset.h>
>> +#include <linux/spinlock.h>
>>  #include <linux/usb/of.h>
>>  #include <linux/workqueue.h>
>>
>> @@ -115,6 +116,7 @@ struct sun4i_usb_phy_data {
>>         const struct sun4i_usb_phy_cfg *cfg;
>>         enum usb_dr_mode dr_mode;
>>         struct mutex mutex;
>> +       spinlock_t reg_lock; /* guard access to phyctl reg */
>>         struct sun4i_usb_phy {
>>                 struct phy *phy;
>>                 void __iomem *pmu;
>> @@ -183,7 +185,7 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy
>> *phy, u32 addr, u32 data,
>>         void __iomem *phyctl = phy_data->base +
>> phy_data->cfg->phyctl_offset;
>>         int i;
>>
>> -       mutex_lock(&phy_data->mutex);
>> +       spin_lock(&phy_data->reg_lock);
>>
>>         if (phy_data->cfg->type == sun8i_a33_phy ||
>>             phy_data->cfg->type == sun50i_a64_phy) {
>> @@ -221,7 +223,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy
>> *phy, u32 addr, u32 data,
>>
>>                 data >>= 1;
>>         }
>> -       mutex_unlock(&phy_data->mutex);
>> +
>> +       spin_unlock(&phy_data->reg_lock);
>>  }
>>
>>  static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
>> @@ -583,6 +586,7 @@ static int sun4i_usb_phy_probe(struct platform_device
>> *pdev)
>>                 return -ENOMEM;
>>
>>         mutex_init(&data->mutex);
>> +       spin_lock_init(&data->reg_lock);
>>         INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
>>         dev_set_drvdata(dev, data);
>>         data->cfg = of_device_get_match_data(dev);
>>
>



More information about the linux-arm-kernel mailing list