[PATCH v5 2/2] sdhci-of-arasan: Set controller to test mode when xlnx-fails-without-test-cd is present
Adrian Hunter
adrian.hunter at intel.com
Thu Sep 8 00:21:27 PDT 2016
On 08/09/16 01:22, Zach Brown wrote:
> The sdhci controller on xilinx zynq devices will not function unless
> the CD bit is provided. http://www.xilinx.com/support/answers/61064.html
> In cases where it is impossible to provide the CD bit in hardware,
> setting the controller to test mode and then setting inserted to true
> will get the controller to function without the CD bit.
>
> When the device has the property xlnx-fails-without-test-cd the driver
> changes the controller to test mode and sets test inserted to true to
> make the controller function.
>
> Signed-off-by: Zach Brown <zach.brown at ni.com>
Doesn't apply. Please re-base on Ulf's mmc tree's next branch.
But since you're doing that please consider some style changes below.
> ---
> drivers/mmc/host/sdhci-of-arasan.c | 34 +++++++++++++++++++++++++++++++++-
> drivers/mmc/host/sdhci.h | 2 ++
> 2 files changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index b6f4c1d..46be9d9 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -23,6 +23,7 @@
> #include <linux/of_device.h>
> #include <linux/phy/phy.h>
> #include "sdhci-pltfm.h"
> +#include <linux/of.h>
>
> #define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c
>
> @@ -38,6 +39,10 @@
> struct sdhci_arasan_data {
> struct clk *clk_ahb;
> struct phy *phy;
> + unsigned int arasan_quirks; /* Arasan deviations from spec */
Should really try to line up the variable names. The name seems a bit
redundant too e.g. arasan_quirks -> quirks
> +
> +/* Controller does not have CD wired and will not function normally without */
> +#define SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD BIT(0)
SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD seems unnecessarily long.
What about SDHCI_ARASAN_QUIRK_FORCE_CDTEST?
> };
>
> static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
> @@ -79,12 +84,32 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
> }
> }
>
> +void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
> +{
> + u8 ctrl;
> + struct sdhci_pltfm_host *pltfm_host;
> + struct sdhci_arasan_data *sdhci_arasan;
Normally we would define and initialize i.e.
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
> +
> + sdhci_reset(host, mask);
> +
> + pltfm_host = sdhci_priv(host);
> + sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
> +
> + if (sdhci_arasan->arasan_quirks &
> + SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD) {
> + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> + ctrl |= SDHCI_CTRL_CDTEST_INS |
> + SDHCI_CTRL_CDTEST_EN;
Didn't need to wrap the line above.
> + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> + }
> +}
> +
> static struct sdhci_ops sdhci_arasan_ops = {
> .set_clock = sdhci_arasan_set_clock,
> .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> .get_timeout_clock = sdhci_arasan_get_timeout_clock,
> .set_bus_width = sdhci_set_bus_width,
> - .reset = sdhci_reset,
> + .reset = sdhci_arasan_reset,
> .set_uhs_signaling = sdhci_set_uhs_signaling,
> };
>
> @@ -179,6 +204,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> struct sdhci_host *host;
> struct sdhci_pltfm_host *pltfm_host;
> struct sdhci_arasan_data *sdhci_arasan;
> + struct device_node *np = pdev->dev.of_node;
>
> host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata,
> sizeof(*sdhci_arasan));
> @@ -215,6 +241,12 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> }
>
> sdhci_get_of_property(pdev);
> +
> + if (of_get_property(np, "xlnx-fails-without-test-cd", NULL)) {
> + sdhci_arasan->arasan_quirks |=
> + SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD;
> + }
> +
> pltfm_host->clk = clk_xin;
>
> ret = mmc_of_parse(host->mmc);
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 609f87c..60dbf1f 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -84,6 +84,8 @@
> #define SDHCI_CTRL_ADMA32 0x10
> #define SDHCI_CTRL_ADMA64 0x18
> #define SDHCI_CTRL_8BITBUS 0x20
> +#define SDHCI_CTRL_CDTEST_INS 0x40
> +#define SDHCI_CTRL_CDTEST_EN 0x80
>
> #define SDHCI_POWER_CONTROL 0x29
> #define SDHCI_POWER_ON 0x01
>
More information about the linux-arm-kernel
mailing list