[PATCH v2 6/7] clk: sunxi-ng: Add A23 CCU
Chen-Yu Tsai
wens at csie.org
Wed Sep 7 00:24:11 PDT 2016
On Tue, Sep 6, 2016 at 8:18 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Add support for the clock unit found in the A23. Due to the similarities
> with the A33, it also shares its clock IDs to allow sharing the DTSI.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
[...]
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
> new file mode 100644
> index 000000000000..e9f2d7785001
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
> @@ -0,0 +1,732 @@
[...]
> +static struct clk_hw_onecell_data sun8i_a23_hw_clks = {
> + .hws = {
> + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
> + [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
> + [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
> + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
> + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
> + [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
> + [CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
> + [CLK_PLL_VIDEO_2X] = &pll_video_2x_clk.hw,
> + [CLK_PLL_VE] = &pll_ve_clk.common.hw,
> + [CLK_PLL_DDR0] = &pll_ddr_clk.common.hw,
> + [CLK_PLL_PERIPH] = &pll_periph_clk.common.hw,
> + [CLK_PLL_PERIPH_2X] = &pll_periph_2x_clk.hw,
> + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
> + [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
> + [CLK_PLL_HSIC] = &pll_hsic_clk.common.hw,
> + [CLK_PLL_DE] = &pll_de_clk.common.hw,
> + [CLK_CPUX] = &cpux_clk.common.hw,
> + [CLK_AXI] = &axi_clk.common.hw,
> + [CLK_AHB1] = &ahb1_clk.common.hw,
> + [CLK_APB1] = &apb1_clk.common.hw,
> + [CLK_APB2] = &apb2_clk.common.hw,
> + [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
> + [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
> + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
> + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
> + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
> + [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
> + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
> + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
> + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
> + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
> + [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
> + [CLK_BUS_EHCI] = &bus_ehci_clk.common.hw,
> + [CLK_BUS_OHCI] = &bus_ohci_clk.common.hw,
> + [CLK_BUS_VE] = &bus_ve_clk.common.hw,
> + [CLK_BUS_LCD] = &bus_lcd_clk.common.hw,
> + [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
> + [CLK_BUS_DE_BE] = &bus_de_be_clk.common.hw,
> + [CLK_BUS_DE_FE] = &bus_de_fe_clk.common.hw,
> + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
> + [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
A23 manual and Allwinner sources say there is a bus gate for SPINLOCK.
Tested it myself, and it indeed exists.
> + [CLK_BUS_DRC] = &bus_drc_clk.common.hw,
> + [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
> + [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
> + [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
> + [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
> + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
> + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
> + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
> + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
> + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
> + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
> + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
> + [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
> + [CLK_NAND] = &nand_clk.common.hw,
> + [CLK_MMC0] = &mmc0_clk.common.hw,
> + [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
> + [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
> + [CLK_MMC1] = &mmc1_clk.common.hw,
> + [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
> + [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
> + [CLK_MMC2] = &mmc2_clk.common.hw,
> + [CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
> + [CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
> + [CLK_SPI0] = &spi0_clk.common.hw,
> + [CLK_SPI1] = &spi1_clk.common.hw,
> + [CLK_I2S0] = &i2s0_clk.common.hw,
> + [CLK_I2S1] = &i2s1_clk.common.hw,
> + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
> + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
> + [CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
> + [CLK_USB_HSIC_12M] = &usb_hsic_12M_clk.common.hw,
> + [CLK_USB_OHCI] = &usb_ohci_clk.common.hw,
> + [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
> + [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
> + [CLK_DRAM_DRC] = &dram_drc_clk.common.hw,
> + [CLK_DRAM_DE_FE] = &dram_de_fe_clk.common.hw,
> + [CLK_DRAM_DE_BE] = &dram_de_be_clk.common.hw,
> + [CLK_DE_BE] = &de_be_clk.common.hw,
> + [CLK_DE_FE] = &de_fe_clk.common.hw,
> + [CLK_LCD_CH0] = &lcd_ch0_clk.common.hw,
> + [CLK_LCD_CH1] = &lcd_ch1_clk.common.hw,
> + [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
> + [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
> + [CLK_VE] = &ve_clk.common.hw,
> + [CLK_AC_DIG] = &ac_dig_clk.common.hw,
> + [CLK_AVS] = &avs_clk.common.hw,
> + [CLK_MBUS] = &mbus_clk.common.hw,
> + [CLK_DSI_SCLK] = &dsi_sclk_clk.common.hw,
> + [CLK_DSI_DPHY] = &dsi_dphy_clk.common.hw,
> + [CLK_DRC] = &drc_clk.common.hw,
> + [CLK_GPU] = &gpu_clk.common.hw,
> + [CLK_ATS] = &ats_clk.common.hw,
> + },
> + .num = CLK_NUMBER,
> +};
> +
> +static struct ccu_reset_map sun8i_a23_ccu_resets[] = {
> + [RST_USB_PHY0] = { 0x0cc, BIT(0) },
> + [RST_USB_PHY1] = { 0x0cc, BIT(1) },
> + [RST_USB_HSIC] = { 0x0cc, BIT(2) },
> +
> + [RST_MBUS] = { 0x0fc, BIT(31) },
> +
> + [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
> + [RST_BUS_DMA] = { 0x2c0, BIT(6) },
> + [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
> + [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
> + [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
> + [RST_BUS_NAND] = { 0x2c0, BIT(13) },
> + [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
> + [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
> + [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
> + [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
> + [RST_BUS_OTG] = { 0x2c0, BIT(24) },
> + [RST_BUS_EHCI] = { 0x2c0, BIT(26) },
> + [RST_BUS_OHCI] = { 0x2c0, BIT(29) },
> +
> + [RST_BUS_VE] = { 0x2c4, BIT(0) },
> + [RST_BUS_LCD] = { 0x2c4, BIT(4) },
> + [RST_BUS_CSI] = { 0x2c4, BIT(8) },
> + [RST_BUS_DE_BE] = { 0x2c4, BIT(12) },
> + [RST_BUS_DE_FE] = { 0x2c4, BIT(14) },
> + [RST_BUS_GPU] = { 0x2c4, BIT(20) },
Allwinner sources say there is a reset control for MSGBOX.
Tested it myself, and it indeed exists.
> + [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
> + [RST_BUS_DRC] = { 0x2c4, BIT(25) },
> +
> + [RST_BUS_LVDS] = { 0x2c8, BIT(0) },
> +
> + [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
> + [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
> + [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
> +
> + [RST_BUS_I2C0] = { 0x2d4, BIT(0) },
> + [RST_BUS_I2C1] = { 0x2d4, BIT(1) },
> + [RST_BUS_I2C2] = { 0x2d4, BIT(2) },
> + [RST_BUS_UART0] = { 0x2d4, BIT(16) },
> + [RST_BUS_UART1] = { 0x2d4, BIT(17) },
> + [RST_BUS_UART2] = { 0x2d4, BIT(18) },
> + [RST_BUS_UART3] = { 0x2d4, BIT(19) },
> + [RST_BUS_UART4] = { 0x2d4, BIT(20) },
> +};
[...]
Other than these 2 bits, this patch looks good.
Regards
ChenYu
More information about the linux-arm-kernel
mailing list