[PATCH 1/8] pcmcia: sa1111: fix propagation of lowlevel board init return code
Russell King
rmk+kernel at armlinux.org.uk
Tue Sep 6 09:37:32 PDT 2016
When testing Lubbock, it was noticed that the sa1111 pcmcia driver bound
but was not functional due to no sockets being registered. This is
because the return code from the lowlevel board initialisation was not
being propagated out of the probe function. Fix this.
Tested-by: Robert Jarzmik <robert.jarzmik at free.fr>
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
drivers/pcmcia/sa1111_badge4.c | 22 ++++++++--------------
drivers/pcmcia/sa1111_generic.c | 22 +++++++++++++++++-----
drivers/pcmcia/sa1111_jornada720.c | 25 ++++++++++---------------
drivers/pcmcia/sa1111_lubbock.c | 32 +++++++++++++-------------------
drivers/pcmcia/sa1111_neponset.c | 26 ++++++++++----------------
5 files changed, 58 insertions(+), 69 deletions(-)
diff --git a/drivers/pcmcia/sa1111_badge4.c b/drivers/pcmcia/sa1111_badge4.c
index 12f0dd091477..2f490930430d 100644
--- a/drivers/pcmcia/sa1111_badge4.c
+++ b/drivers/pcmcia/sa1111_badge4.c
@@ -134,20 +134,14 @@ static struct pcmcia_low_level badge4_pcmcia_ops = {
int pcmcia_badge4_init(struct sa1111_dev *dev)
{
- int ret = -ENODEV;
-
- if (machine_is_badge4()) {
- printk(KERN_INFO
- "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
- __func__,
- badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
-
- sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops);
- ret = sa1111_pcmcia_add(dev, &badge4_pcmcia_ops,
- sa11xx_drv_pcmcia_add_one);
- }
-
- return ret;
+ printk(KERN_INFO
+ "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
+ __func__,
+ badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
+
+ sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops);
+ return sa1111_pcmcia_add(dev, &badge4_pcmcia_ops,
+ sa11xx_drv_pcmcia_add_one);
}
static int __init pcmv_setup(char *s)
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index a1531feb8460..3d95dffcff7a 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -18,6 +18,7 @@
#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
+#include <asm/mach-types.h>
#include <asm/irq.h>
#include "sa1111_generic.h"
@@ -203,19 +204,30 @@ static int pcmcia_probe(struct sa1111_dev *dev)
sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR);
sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR);
+ ret = -ENODEV;
#ifdef CONFIG_SA1100_BADGE4
- pcmcia_badge4_init(dev);
+ if (machine_is_badge4())
+ ret = pcmcia_badge4_init(dev);
#endif
#ifdef CONFIG_SA1100_JORNADA720
- pcmcia_jornada720_init(dev);
+ if (machine_is_jornada720())
+ ret = pcmcia_jornada720_init(dev);
#endif
#ifdef CONFIG_ARCH_LUBBOCK
- pcmcia_lubbock_init(dev);
+ if (machine_is_lubbock())
+ ret = pcmcia_lubbock_init(dev);
#endif
#ifdef CONFIG_ASSABET_NEPONSET
- pcmcia_neponset_init(dev);
+ if (machine_is_assabet())
+ ret = pcmcia_neponset_init(dev);
#endif
- return 0;
+
+ if (ret) {
+ release_mem_region(dev->res.start, 512);
+ sa1111_disable_device(dev);
+ }
+
+ return ret;
}
static int pcmcia_remove(struct sa1111_dev *dev)
diff --git a/drivers/pcmcia/sa1111_jornada720.c b/drivers/pcmcia/sa1111_jornada720.c
index c2c30580c83f..480a3ede27c8 100644
--- a/drivers/pcmcia/sa1111_jornada720.c
+++ b/drivers/pcmcia/sa1111_jornada720.c
@@ -94,22 +94,17 @@ static struct pcmcia_low_level jornada720_pcmcia_ops = {
int pcmcia_jornada720_init(struct sa1111_dev *sadev)
{
- int ret = -ENODEV;
+ unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
- if (machine_is_jornada720()) {
- unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
+ /* Fixme: why messing around with SA11x0's GPIO1? */
+ GRER |= 0x00000002;
- GRER |= 0x00000002;
+ /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
+ sa1111_set_io_dir(sadev, pin, 0, 0);
+ sa1111_set_io(sadev, pin, 0);
+ sa1111_set_sleep_io(sadev, pin, 0);
- /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
- sa1111_set_io_dir(sadev, pin, 0, 0);
- sa1111_set_io(sadev, pin, 0);
- sa1111_set_sleep_io(sadev, pin, 0);
-
- sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops);
- ret = sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops,
- sa11xx_drv_pcmcia_add_one);
- }
-
- return ret;
+ sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops);
+ return sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops,
+ sa11xx_drv_pcmcia_add_one);
}
diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c
index c5caf5790451..df2b6b28b1d1 100644
--- a/drivers/pcmcia/sa1111_lubbock.c
+++ b/drivers/pcmcia/sa1111_lubbock.c
@@ -210,27 +210,21 @@ static struct pcmcia_low_level lubbock_pcmcia_ops = {
int pcmcia_lubbock_init(struct sa1111_dev *sadev)
{
- int ret = -ENODEV;
-
- if (machine_is_lubbock()) {
- /*
- * Set GPIO_A<3:0> to be outputs for the MAX1600,
- * and switch to standby mode.
- */
- sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
- sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
-
- /* Set CF Socket 1 power to standby mode. */
- lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
+ /*
+ * Set GPIO_A<3:0> to be outputs for the MAX1600,
+ * and switch to standby mode.
+ */
+ sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
+ sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
- pxa2xx_configure_sockets(&sadev->dev);
- ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
- pxa2xx_drv_pcmcia_add_one);
- }
+ /* Set CF Socket 1 power to standby mode. */
+ lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
- return ret;
+ pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
+ pxa2xx_configure_sockets(&sadev->dev);
+ return sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
+ pxa2xx_drv_pcmcia_add_one);
}
MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c
index 1d78739c4c07..019c395eb4bf 100644
--- a/drivers/pcmcia/sa1111_neponset.c
+++ b/drivers/pcmcia/sa1111_neponset.c
@@ -110,20 +110,14 @@ static struct pcmcia_low_level neponset_pcmcia_ops = {
int pcmcia_neponset_init(struct sa1111_dev *sadev)
{
- int ret = -ENODEV;
-
- if (machine_is_assabet()) {
- /*
- * Set GPIO_A<3:0> to be outputs for the MAX1600,
- * and switch to standby mode.
- */
- sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
- sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
- ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
- sa11xx_drv_pcmcia_add_one);
- }
-
- return ret;
+ /*
+ * Set GPIO_A<3:0> to be outputs for the MAX1600,
+ * and switch to standby mode.
+ */
+ sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
+ sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
+ return sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
+ sa11xx_drv_pcmcia_add_one);
}
--
2.1.0
More information about the linux-arm-kernel
mailing list