[PATCH] ARM: LPAE: initialize cachepolicy correctly

[Russell King - ARM Linux]

On Sun, Sep 04, 2016 at 04:31:40PM -0700, Stefan Agner wrote:
> On 2016-09-04 15:09, Russell King - ARM Linux wrote:
> > On Sat, Sep 03, 2016 at 10:33:31PM -0700, Stefan Agner wrote:
> >> The cachepolicy variable gets initialized using a masked pmd
> >> So far, the pmd has been masked with flags valid for the 2-page
> >> table format. In the LPAE case, this lead to a wrong assumption
> >> of what the initial cachepolicy has been used. Later a check
> >> forces the cache policy to writealloc and prints the following
> >> warning:
> >> Forcing write-allocate cache policy for SMP
> >>
> >> This patch uses PMD_SECT_WBWA to mask all cache setting flags.
> >> The define represents the complete mask of the cache relevant
> >> flags for both page table formats.
> > 
> > PMD_SECT_WBWA is just one possible combination, it's not a bit-mask.
> > We need a new definition.
> 
> Agreed, it just happens to be the same as the bit-mask in both
> page-table layouts.
> 
> Does PMD_SECT_CACHE_MASK sounds like a reasonable identifier for it?

Yep, thanks.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.