[v14 PATCH 2/5] phy: Add USB Type-C PHY driver for rk3399
Chanwoo Choi
cw00.choi at samsung.com
Sun Sep 4 18:28:54 PDT 2016
Dear all,
On 2016년 08월 24일 14:17, Chris Zhong wrote:
> Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB
> Type-C PHY is designed to support the USB3 and DP applications.
> The USB3 operates in SuperSpeed mode and the DP can operate at RBR,
> HBR and HBR2 data rates. This driver create 2 PHY devices separately
> for USB3 and DisplyPort, and registers them under the child node.
>
> Signed-off-by: Chris Zhong <zyw at rock-chips.com>
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> Reviewed-by: Guenter Roeck <groeck at chromium.org>
> Tested-by: Guenter Roeck <groeck at chromium.org>
>
> ---
>
> Changes in v14:
> - change the name of property from super speed to EXTCON_PROP_USB_SS
>
> Changes in v13:
> - add some description in front of driver
> - change name of usb to usb3
> - add a USB3 RX register configuration
> - do not return err if nothing connected with Type-C, when usb phy power on,
> since the USB core driver will call phy power without USB3 device connected.
>
> Changes in v12:
> - enable DP+USB3 mode, only when EXTCON_PROP_USB_SUPERSPEED equal 1
> and DP is attached
>
> Changes in v11:
> - make a clearer demarcation between usb phy and dp phy.
>
> Changes in v10:
> - do not control dp select and hpd config in phy driver
>
> Changes in v9:
> - the new_mode should be int not u8
> - move mutex_lock(&tcphy->lock); to earlier place. in
> rockchip_usb3_phy_power_off
> - better mutex lock for phy mode and flip
> - split the Type-C PHY into two PHYs: USB3 and DP
>
> Changes in v8:
> - set the default cable id to EXTCON_USB_HOST
> - optimization Error log
>
> Changes in v7:
> - support new API of extcon
>
> Changes in v6:
> - delete the support of PIN_ASSIGN_A/B
> - set the default mode to MODE_DFP_USB
> - disable DP PLL at USB3 only mode
>
> Changes in v5:
> - support get property from extcon
> - remove PIN ASSIGN A/B support
>
> Changes in v4:
> - select EXTCON
> - use phy framework to control the USB3 and DP function
> - rename PIN_MAP_ to PIN_ASSIGN_
>
> Changes in v3:
> - remove the phy framework(Kishon Vijay Abraham I)
> - add parentheses around the macro
> - use a single space between type and name
> - add spaces after opening and before closing braces.
> - use u16 for register value
> - remove type-c phy header file
> - CodingStyle optimization
> - use some cable extcon to get type-c port information
> - add a extcon to notify Display Port
>
> Changes in v2:
> - select RESET_CONTROLLER
> - alphabetic order
> - modify some spelling mistakes
> - make mode cleaner
> - use bool for enable/disable
> - check all of the return value
> - return a better err number
> - use more readx_poll_timeout()
> - clk_disable_unprepare(tcphy->clk_ref);
> - remove unuse functions, rockchip_typec_phy_power_on/off
> - remove unnecessary typecast from void *
> - use dts node to distinguish between phys.
>
> Changes in v1:
> - update the licence note
> - init core clock to 50MHz
> - use extcon API
> - remove unused global
> - add some comments for magic num
> - change usleep_range(1000, 2000) tousleep_range(1000, 1050)
> - remove __func__ from dev_err
> - return err number when get clk failed
> - remove ADDR_ADJ define
> - use devm_clk_get(&pdev->dev, "tcpdcore")
>
> drivers/phy/Kconfig | 9 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-rockchip-typec.c | 1013 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1023 insertions(+)
> create mode 100644 drivers/phy/phy-rockchip-typec.c
>
[snip]
This patch rely on the extcon git repository to support the extcon property
and USB 3.0 property. I created the immutable branch(ib-extcon-phy-4.9).
I send this pull request to prevent the build error.
(The patches of extcon property for USB 3.0 depend on the other extcon patches
which are already merged. So, it is diffcult to separate the only patches
of extcon property.)
Best Regards,
Chanwoo Choi
The following changes since commit 29b4817d4018df78086157ea3a55c1d9424a7cfc:
Linux 4.8-rc1 (2016-08-07 18:18:00 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git ib-extcon-phy-4.9
for you to fetch changes up to 8457a1b49a2af0a0e71f80afed9f7c80de361610:
extcon: Introduce EXTCON_PROP_USB_SS property for SuperSpeed mode (2016-08-18 10:23:36 +0900)
----------------------------------------------------------------
Chanwoo Choi (12):
extcon: arizona: Remove the usage of extcon_update_state()
extcon: adc-jack: Remove the usage of extcon_set_state()
extcon: gpio: Remove the usage of extcon_set_state()
extcon: Remove the state_store() to prevent the wrong access
extcon: Block the bit masking operation for cable state except for extcon core
extcon: Add the extcon_type to gather each connector into five category
extcon: Add the support for extcon property according to extcon type
extcon: Add the support for the capability of each property
extcon: Rename the extcon_set/get_state() to maintain the function naming pattern
extcon: Add the synchronization extcon APIs to support the notification
extcon: Add new EXTCON_DISP_HMD for Head-mounted Display device
extcon: Add new EXTCON_CHG_WPT for Wireless Power Transfer device
Charles Keepax (1):
extcon: arizona: Remove unneeded semi-colon
Chris Zhong (1):
extcon: Add EXTCON_DISP_DP and the property for USB Type-C
Guenter Roeck (1):
extcon: Introduce EXTCON_PROP_USB_SS property for SuperSpeed mode
Maninder Singh (1):
extcon: Fix compile time warning
Stephen Boyd (1):
extcon: Move extcon_get_edev_by_phandle() errors to dbg level
Venkat Reddy Talla (1):
extcon: adc-jack: update cable state during boot
drivers/extcon/extcon-adc-jack.c | 27 +-
drivers/extcon/extcon-arizona.c | 13 +-
drivers/extcon/extcon-gpio.c | 2 +-
drivers/extcon/extcon.c | 774 ++++++++++++++++++++++++++-------
include/linux/extcon.h | 181 +++++++-
include/linux/extcon/extcon-adc-jack.h | 4 +-
6 files changed, 809 insertions(+), 192 deletions(-)
More information about the linux-arm-kernel
mailing list