[PATCH 4/7] phy: meson: add USB2 PHY support for Meson8b and GXBB
Martin Blumenstingl
martin.blumenstingl at googlemail.com
Sun Sep 4 14:31:49 PDT 2016
This is a new driver for the USB PHY found in Meson8b and GXBB SoCs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
drivers/phy/Kconfig | 11 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-meson-usb2.c | 299 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 311 insertions(+)
create mode 100644 drivers/phy/phy-meson-usb2.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 19bff3a..6ad87ec 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -453,4 +453,15 @@ config PHY_NS2_PCIE
help
Enable this to support the Broadcom Northstar2 PCIe PHY.
If unsure, say N.
+
+config PHY_MESON_USB2
+ tristate "Meson USB2 PHY driver"
+ default ARCH_MESON
+ depends on OF && (ARCH_MESON || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable this to support the Meson USB2 PHYs found in Meson8b
+ and GXBB SoCs.
+ If unsure, say N.
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 90ae198..dd507ac 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -56,3 +56,4 @@ obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
+obj-$(CONFIG_PHY_MESON_USB2) += phy-meson-usb2.o
diff --git a/drivers/phy/phy-meson-usb2.c b/drivers/phy/phy-meson-usb2.c
new file mode 100644
index 0000000..8cda138
--- /dev/null
+++ b/drivers/phy/phy-meson-usb2.c
@@ -0,0 +1,299 @@
+/*
+ * Meson USB2 PHY driver
+ *
+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/usb/of.h>
+
+#define REG_CONFIG 0x00
+ #define REG_CONFIG_CLK_EN BIT(0)
+ #define REG_CONFIG_CLK_SEL_MASK GENMASK(3, 1)
+ #define REG_CONFIG_CLK_DIV_MASK GENMASK(10, 4)
+ #define REG_CONFIG_CLK_32k_ALTSEL BIT(15)
+ #define REG_CONFIG_TEST_TRIG BIT(31)
+
+#define REG_CTRL 0x04
+ #define REG_CTRL_SOFT_PRST BIT(0)
+ #define REG_CTRL_SOFT_HRESET BIT(1)
+ #define REG_CTRL_SS_SCALEDOWN_MODE_MASK GENMASK(3, 2)
+ #define REG_CTRL_CLK_DET_RST BIT(4)
+ #define REG_CTRL_INTR_SEL BIT(5)
+ #define REG_CTRL_CLK_DETECTED BIT(8)
+ #define REG_CTRL_SOF_SENT_RCVD_TGL BIT(9)
+ #define REG_CTRL_SOF_TOGGLE_OUT BIT(10)
+ #define REG_CTRL_POWER_ON_RESET BIT(15)
+ #define REG_CTRL_SLEEPM BIT(16)
+ #define REG_CTRL_TX_BITSTUFF_ENN_H BIT(17)
+ #define REG_CTRL_TX_BITSTUFF_ENN BIT(18)
+ #define REG_CTRL_COMMON_ON BIT(19)
+ #define REG_CTRL_REF_CLK_SEL_MASK GENMASK(21, 20)
+ #define REG_CTRL_REF_CLK_SEL_SHIFT 20
+ #define REG_CTRL_FSEL_MASK GENMASK(24, 22)
+ #define REG_CTRL_FSEL_SHIFT 22
+ #define REG_CTRL_PORT_RESET BIT(25)
+ #define REG_CTRL_THREAD_ID_MASK GENMASK(31, 26)
+
+#define REG_ENDP_INTR 0x08
+
+/* bits [31:26], [24:21] and [15:3] seem to be read-only */
+#define REG_ADP_BC 0x0c
+ #define REG_ADP_BC_VBUS_VLD_EXT_SEL BIT(0)
+ #define REG_ADP_BC_VBUS_VLD_EXT BIT(1)
+ #define REG_ADP_BC_OTG_DISABLE BIT(2)
+ #define REG_ADP_BC_ID_PULLUP BIT(3)
+ #define REG_ADP_BC_DRV_VBUS BIT(4)
+ #define REG_ADP_BC_ADP_PRB_EN BIT(5)
+ #define REG_ADP_BC_ADP_DISCHARGE BIT(6)
+ #define REG_ADP_BC_ADP_CHARGE BIT(7)
+ #define REG_ADP_BC_SESS_END BIT(8)
+ #define REG_ADP_BC_DEVICE_SESS_VLD BIT(9)
+ #define REG_ADP_BC_B_VALID BIT(10)
+ #define REG_ADP_BC_A_VALID BIT(11)
+ #define REG_ADP_BC_ID_DIG BIT(12)
+ #define REG_ADP_BC_VBUS_VALID BIT(13)
+ #define REG_ADP_BC_ADP_PROBE BIT(14)
+ #define REG_ADP_BC_ADP_SENSE BIT(15)
+ #define REG_ADP_BC_ACA_ENABLE BIT(16)
+ #define REG_ADP_BC_DCD_ENABLE BIT(17)
+ #define REG_ADP_BC_VDAT_DET_EN_B BIT(18)
+ #define REG_ADP_BC_VDAT_SRC_EN_B BIT(19)
+ #define REG_ADP_BC_CHARGE_SEL BIT(20)
+ #define REG_ADP_BC_CHARGE_DETECT BIT(21)
+ #define REG_ADP_BC_ACA_PIN_RANGE_C BIT(22)
+ #define REG_ADP_BC_ACA_PIN_RANGE_B BIT(23)
+ #define REG_ADP_BC_ACA_PIN_RANGE_A BIT(24)
+ #define REG_ADP_BC_ACA_PIN_GND BIT(25)
+ #define REG_ADP_BC_ACA_PIN_FLOAT BIT(26)
+
+#define REG_DBG_UART 0x14
+
+#define REG_TEST 0x18
+ #define REG_TEST_DATA_IN_MASK GENMASK(3, 0)
+ #define REG_TEST_EN_MASK GENMASK(7, 4)
+ #define REG_TEST_ADDR_MASK GENMASK(11, 8)
+ #define REG_TEST_DATA_OUT_SEL BIT(12)
+ #define REG_TEST_CLK BIT(13)
+ #define REG_TEST_VA_TEST_EN_B_MASK GENMASK(15, 14)
+ #define REG_TEST_DATA_OUT_MASK GENMASK(19, 16)
+ #define REG_TEST_DISABLE_ID_PULLUP BIT(20)
+
+#define REG_TUNE 0x1c
+ #define REG_TUNE_TX_RES_TUNE_MASK GENMASK(1, 0)
+ #define REG_TUNE_TX_HSXV_TUNE_MASK GENMASK(3, 2)
+ #define REG_TUNE_TX_VREF_TUNE_MASK GENMASK(7, 4)
+ #define REG_TUNE_TX_RISE_TUNE_MASK GENMASK(9, 8)
+ #define REG_TUNE_TX_PREEMP_PULSE_TUNE BIT(10)
+ #define REG_TUNE_TX_PREEMP_AMP_TUNE_MASK GENMASK(12, 11)
+ #define REG_TUNE_TX_FSLS_TUNE_MASK GENMASK(16, 13)
+ #define REG_TUNE_SQRX_TUNE_MASK GENMASK(19, 17)
+ #define REG_TUNE_OTG_TUNE GENMASK(22, 20)
+ #define REG_TUNE_COMP_DIS_TUNE GENMASK(25, 23)
+ #define REG_TUNE_HOST_DM_PULLDOWN BIT(26)
+ #define REG_TUNE_HOST_DP_PULLDOWN BIT(27)
+
+#define RESET_COMPLETE_TIME 500
+#define ACA_ENABLE_COMPLETE_TIME 50
+
+/*
+ * The PHYs are sharing a common reset line -> we are only allowed to reset
+ * once for all PHYs.
+ */
+static int usb_reset_refcnt;
+
+struct phy_meson_usb2_priv {
+ void __iomem *regs;
+ enum usb_dr_mode dr_mode;
+ struct reset_control *reset_usb_otg;
+ struct clk *clk_usb_general;
+ struct clk *clk_usb;
+};
+
+static u32 phy_meson_usb2_read(struct phy_meson_usb2_priv *phy_priv, u32 reg)
+{
+ return readl(phy_priv->regs + reg);
+}
+
+static void phy_meson_usb2_mask_bits(struct phy_meson_usb2_priv *phy_priv,
+ u32 reg, u32 mask, u32 value)
+{
+ u32 data;
+
+ data = phy_meson_usb2_read(phy_priv, reg);
+ data &= ~mask;
+ data |= (value & mask);
+
+ writel(data, phy_priv->regs + reg);
+}
+
+static int phy_meson_usb2_power_on(struct phy *phy)
+{
+ struct phy_meson_usb2_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_prepare_enable(priv->clk_usb_general);
+ if (ret) {
+ dev_err(&phy->dev, "Failed to enable USB general clock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(priv->clk_usb);
+ if (ret) {
+ dev_err(&phy->dev, "Failed to enable USB DDR clock\n");
+ return ret;
+ }
+
+ phy_meson_usb2_mask_bits(priv, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
+ REG_CONFIG_CLK_32k_ALTSEL);
+
+ phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
+ 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
+
+ phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_FSEL_MASK,
+ 0x5 << REG_CTRL_FSEL_SHIFT);
+
+ /* reset the PHY */
+ phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET,
+ REG_CTRL_POWER_ON_RESET);
+ udelay(RESET_COMPLETE_TIME);
+ phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0);
+ udelay(RESET_COMPLETE_TIME);
+
+ phy_meson_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT,
+ REG_CTRL_SOF_TOGGLE_OUT);
+
+ if (priv->dr_mode == USB_DR_MODE_HOST) {
+ phy_meson_usb2_mask_bits(priv, REG_ADP_BC,
+ REG_ADP_BC_ACA_ENABLE,
+ REG_ADP_BC_ACA_ENABLE);
+
+ udelay(ACA_ENABLE_COMPLETE_TIME);
+
+ if (phy_meson_usb2_read(priv, REG_ADP_BC) &
+ REG_ADP_BC_ACA_PIN_FLOAT) {
+ dev_warn(&phy->dev, "USB ID detect failed!\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int phy_meson_usb2_power_off(struct phy *phy)
+{
+ struct phy_meson_usb2_priv *priv = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(priv->clk_usb);
+ clk_disable_unprepare(priv->clk_usb_general);
+
+ return 0;
+}
+
+static const struct phy_ops phy_meson_usb2_ops = {
+ .power_on = phy_meson_usb2_power_on,
+ .power_off = phy_meson_usb2_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int phy_meson_usb2_probe(struct platform_device *pdev)
+{
+ struct phy_meson_usb2_priv *priv;
+ struct resource *res;
+ struct phy *phy;
+ struct phy_provider *phy_provider;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->regs))
+ return PTR_ERR(priv->regs);
+
+ priv->clk_usb_general = devm_clk_get(&pdev->dev, "usb_general");
+ if (IS_ERR(priv->clk_usb_general))
+ return PTR_ERR(priv->clk_usb_general);
+
+ priv->clk_usb = devm_clk_get(&pdev->dev, "usb");
+ if (IS_ERR(priv->clk_usb))
+ return PTR_ERR(priv->clk_usb);
+
+ priv->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
+ if (priv->dr_mode == USB_DR_MODE_UNKNOWN) {
+ dev_err(&pdev->dev,
+ "missing dual role configuration of the controller\n");
+ return -EINVAL;
+ }
+
+ phy = devm_phy_create(&pdev->dev, NULL, &phy_meson_usb2_ops);
+ if (IS_ERR(phy)) {
+ dev_err(&pdev->dev, "failed to create PHY\n");
+ return PTR_ERR(phy);
+ }
+
+ if (usb_reset_refcnt++ == 0) {
+ ret = device_reset(&pdev->dev);
+ if (ret) {
+ dev_err(&phy->dev, "Failed to reset USB PHY\n");
+ return ret;
+ }
+ }
+
+ phy_set_drvdata(phy, priv);
+
+ phy_provider =
+ devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
+
+ if (IS_ERR(phy_provider)) {
+ usb_reset_refcnt--;
+
+ return PTR_ERR(phy_provider);
+ }
+
+ return 0;
+}
+
+static int phy_meson_usb2_remove(struct platform_device *pdev)
+{
+ usb_reset_refcnt--;
+
+ return 0;
+}
+
+static const struct of_device_id phy_meson_usb2_of_match[] = {
+ { .compatible = "amlogic,meson8b-usb2-phy", },
+ { .compatible = "amlogic,meson-gxbb-usb2-phy", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, phy_meson_usb2_of_match);
+
+static struct platform_driver phy_meson_usb2_driver = {
+ .probe = phy_meson_usb2_probe,
+ .remove = phy_meson_usb2_remove,
+ .driver = {
+ .name = "phy-meson-usb2",
+ .of_match_table = phy_meson_usb2_of_match,
+ },
+};
+module_platform_driver(phy_meson_usb2_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl at googlemail.com>");
+MODULE_DESCRIPTION("Meson USB2 PHY driver");
+MODULE_LICENSE("GPL");
--
2.9.3
More information about the linux-arm-kernel
mailing list