[PATCH v7 0/9] MT2701 DRM support

YT Shen yt.shen at mediatek.com
Fri Sep 2 04:24:35 PDT 2016


This is MT2701 DRM support PATCH v7, based on 4.8-rc1.
We add DSI interrupt control, transfer function for MIPI DSI panel support.
Most codes are the same, except some register changed.

For example:
 - DISP_OVL address offset changed, color format definition changed.
 - DISP_RDMA fifo size changed.
 - DISP_COLOR offset changed.
 - MIPI_TX setting changed.

We add a new component DDP_COMPONENT_BLS, and the connections are updated.
OVL -> RDMA -> COLOR -> BLS -> DSI
RDMA -> DPI
And we have shadow register support in MT2701.

We remove dts patch from the patch series, which depends on MT2701 CCF and scpsys.

Changes since v6:
- Change data type of irq_data to u32
- Rewrite mtk_dsi_host_transfer() for simplify
- Move some MIPI_TX config to patch of "drm/mediatek: add
*driver_data for different hardware settings".
- Remove device tree from this patch series

Changes since v5:
- Remove DPI device tree and compatible string
- Use one wait queue to handle interrupt status
- Update the interrupt check flow and DSI_INT_ALL_BITS
- Use same function for host read/write command
- various fixes

Changes since v4:
- Add messages when timeout in mtk_disp_mutex_acquire()
- Add descriptions for DISP_REG_MUTEX registers
- Move connection settings for display modules to a separate patch
- Remove 'mt2701-disp-wdma' because it is unused
- Move cleaning up and renaming to a separate patch
- Use wait_event_interruptible_timeout() to replace polling
- Remove irq_num from mtk_dsi structure
- Remove redundant and debug codes

Changes since v3:
- Add DSI support for MIPI DSI panels
- Update BLS binding to PWM nodes
- Remove ufoe device nodes
- Remove redundant parentheses
- Remove global variable initialization

Changes since v2:
- Rename mtk_ddp_mux_sel to mtk_ddp_sout_sel
- Update mt2701_mtk_ddp_ext components
- Changed to prefix naming
- Reorder the patch series
- Use of_device_get_match_data() to get driver private data
- Use iopoll macros to implement mtk_disp_mutex_acquire()
- Removed empty device tree nodes

Changes since v1:
- Removed BLS bindings and codes, which belong to pwm driver
- Moved mtk_disp_mutex_acquire() just before mtk_crtc_ddp_config()
- Split patch into smaller parts
- Added const keyword to constant structure
- Removed codes for special memory align

The PATCH depends on the following patch:
https://patchwork.kernel.org/patch/9289401/ ("dt-bindings: ARM: Mediatek: Document bindings for MT2701") 
https://patchwork.kernel.org/patch/9222997/ ("dt-bindings: pwm: Add MediaTek display PWM bindings") 

Thanks,
yt.shen

YT Shen (7):
  drm/mediatek: rename macros, add chip prefix
  drm/mediatek: add *driver_data for different hardware settings
  drm/mediatek: add shadow register support
  drm/mediatek: update display module connections
  drm/mediatek: cleaning up and refine
  drm/mediatek: update DSI sub driver flow
  drm/mediatek: add support for Mediatek SoC MT2701

shaoming chen (2):
  drm/mediatek: add dsi interrupt control
  drm/mediatek: add dsi transfer function

 drivers/gpu/drm/mediatek/mtk_disp_ovl.c     |  32 ++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c    |  17 +-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     |  75 +++--
 drivers/gpu/drm/mediatek/mtk_drm_ddp.c      | 138 ++++++---
 drivers/gpu/drm/mediatek/mtk_drm_ddp.h      |   2 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |  34 ++-
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  14 +
 drivers/gpu/drm/mediatek/mtk_drm_drv.c      |  54 +++-
 drivers/gpu/drm/mediatek/mtk_drm_drv.h      |   9 +
 drivers/gpu/drm/mediatek/mtk_dsi.c          | 432 ++++++++++++++++++++++++----
 drivers/gpu/drm/mediatek/mtk_mipi_tx.c      |  70 +++--
 11 files changed, 717 insertions(+), 160 deletions(-)

-- 
1.9.1




More information about the linux-arm-kernel mailing list