[PATCH 4/7] drm/panel: Add Sinlinx SinA33 7" panel

Chen-Yu Tsai wens at csie.org
Fri Sep 2 00:01:08 PDT 2016


On Thu, Sep 1, 2016 at 11:32 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> The SinA33 has an unidentified panel. Add the timings for it under a new
> compatible.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 85143d1b9b31..af142e804245 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1409,6 +1409,29 @@ static const struct panel_desc shelly_sca07010_bfn_lnn = {
>         .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
>  };
>
> +static const struct drm_display_mode sinlinx_sina33_lcd_7_mode = {

Nit on the name: the lcd panel also works with sina31s. The only
difference is the ribbon cable used to connect it to the board.
Maybe sinlinx_sinaxx_lcd_7? Just a suggestion though, the patch
looks fine.

ChenYu

> +       .clock = 66000,
> +       .hdisplay = 1024,
> +       .hsync_start = 1024 + 160,
> +       .hsync_end = 1024 + 160 + 70,
> +       .htotal = 1024 + 160 + 70 + 90,
> +       .vdisplay = 600,
> +       .vsync_start = 600 + 127,
> +       .vsync_end = 600 + 127 + 20,
> +       .vtotal = 600 + 127 + 20 + 3,
> +       .vrefresh = 60,
> +};
> +
> +static const struct panel_desc sinlinx_sina33_lcd_7 = {
> +       .modes = &sinlinx_sina33_lcd_7_mode,
> +       .num_modes = 1,
> +       .size = {
> +               .width = 154,
> +               .height = 87,
> +       },
> +       .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> +};
> +
>  static const struct drm_display_mode starry_kr122ea0sra_mode = {
>         .clock = 147000,
>         .hdisplay = 1920,
> @@ -1644,6 +1667,9 @@ static const struct of_device_id platform_of_match[] = {
>                 .compatible = "shelly,sca07010-bfn-lnn",
>                 .data = &shelly_sca07010_bfn_lnn,
>         }, {
> +               .compatible = "sinlinx,sina33-lcd-7",
> +               .data = &sinlinx_sina33_lcd_7,
> +       }, {
>                 .compatible = "starry,kr122ea0sra",
>                 .data = &starry_kr122ea0sra,
>         }, {
> --
> 2.9.2
>



More information about the linux-arm-kernel mailing list