[PATCH 3/6] clk: sunxi-ng: Add N-class clocks support
Maxime Ripard
maxime.ripard at free-electrons.com
Thu Sep 1 07:16:14 PDT 2016
Add support for the class with a single factor, N, being a multiplier.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
drivers/clk/sunxi-ng/Kconfig | 4 ++
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu_mult.c | 133 ++++++++++++++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu_mult.h | 35 +++++++++++
4 files changed, 173 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu_mult.c
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index a1dee861474c..c7258779daa8 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -19,6 +19,10 @@ config SUNXI_CCU_GATE
config SUNXI_CCU_MUX
bool
+config SUNXI_CCU_MULT
+ bool
+ select SUNXI_CCU_MUX
+
config SUNXI_CCU_PHASE
bool
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 261438b00215..462a5f8383ed 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SUNXI_CCU_DIV) += ccu_div.o
obj-$(CONFIG_SUNXI_CCU_FRAC) += ccu_frac.o
obj-$(CONFIG_SUNXI_CCU_GATE) += ccu_gate.o
obj-$(CONFIG_SUNXI_CCU_MUX) += ccu_mux.o
+obj-$(CONFIG_SUNXI_CCU_MULT) += ccu_mult.o
obj-$(CONFIG_SUNXI_CCU_PHASE) += ccu_phase.o
# Multi-factor clocks
diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c
new file mode 100644
index 000000000000..119b190c0eb5
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu_mult.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard
+ * Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+
+#include "ccu_gate.h"
+#include "ccu_mult.h"
+
+static void ccu_mult_find_best(unsigned long parent, unsigned long rate,
+ unsigned int max_n, unsigned int *n)
+{
+ *n = rate / parent;
+}
+
+static unsigned long ccu_mult_round_rate(struct ccu_mux_internal *mux,
+ unsigned long parent_rate,
+ unsigned long rate,
+ void *data)
+{
+ struct ccu_mult *cm = data;
+ unsigned int n;
+
+ ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n);
+
+ return parent_rate * n;
+}
+
+static void ccu_mult_disable(struct clk_hw *hw)
+{
+ struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+ return ccu_gate_helper_disable(&cm->common, cm->enable);
+}
+
+static int ccu_mult_enable(struct clk_hw *hw)
+{
+ struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+ return ccu_gate_helper_enable(&cm->common, cm->enable);
+}
+
+static int ccu_mult_is_enabled(struct clk_hw *hw)
+{
+ struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+ return ccu_gate_helper_is_enabled(&cm->common, cm->enable);
+}
+
+static unsigned long ccu_mult_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ccu_mult *cm = hw_to_ccu_mult(hw);
+ unsigned long val;
+ u32 reg;
+
+ reg = readl(cm->common.base + cm->common.reg);
+ val = reg >> cm->mult.shift;
+ val &= (1 << cm->mult.width) - 1;
+
+ ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
+ &parent_rate);
+
+ return parent_rate * (val + 1);
+}
+
+static int ccu_mult_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+ return ccu_mux_helper_determine_rate(&cm->common, &cm->mux,
+ req, ccu_mult_round_rate, cm);
+}
+
+static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct ccu_mult *cm = hw_to_ccu_mult(hw);
+ unsigned long flags;
+ unsigned int n;
+ u32 reg;
+
+ ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
+ &parent_rate);
+
+ ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n);
+
+ spin_lock_irqsave(cm->common.lock, flags);
+
+ reg = readl(cm->common.base + cm->common.reg);
+ reg &= ~GENMASK(cm->mult.width + cm->mult.shift - 1, cm->mult.shift);
+
+ writel(reg | ((n - 1) << cm->mult.shift),
+ cm->common.base + cm->common.reg);
+
+ spin_unlock_irqrestore(cm->common.lock, flags);
+
+ return 0;
+}
+
+static u8 ccu_mult_get_parent(struct clk_hw *hw)
+{
+ struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+ return ccu_mux_helper_get_parent(&cm->common, &cm->mux);
+}
+
+static int ccu_mult_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+ return ccu_mux_helper_set_parent(&cm->common, &cm->mux, index);
+}
+
+const struct clk_ops ccu_mult_ops = {
+ .disable = ccu_mult_disable,
+ .enable = ccu_mult_enable,
+ .is_enabled = ccu_mult_is_enabled,
+
+ .get_parent = ccu_mult_get_parent,
+ .set_parent = ccu_mult_set_parent,
+
+ .determine_rate = ccu_mult_determine_rate,
+ .recalc_rate = ccu_mult_recalc_rate,
+ .set_rate = ccu_mult_set_rate,
+};
diff --git a/drivers/clk/sunxi-ng/ccu_mult.h b/drivers/clk/sunxi-ng/ccu_mult.h
index 609db6610880..5d2c8dc14073 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.h
+++ b/drivers/clk/sunxi-ng/ccu_mult.h
@@ -1,6 +1,9 @@
#ifndef _CCU_MULT_H_
#define _CCU_MULT_H_
+#include "ccu_common.h"
+#include "ccu_mux.h"
+
struct _ccu_mult {
u8 shift;
u8 width;
@@ -12,4 +15,36 @@ struct _ccu_mult {
.width = _width, \
}
+struct ccu_mult {
+ u32 enable;
+
+ struct _ccu_mult mult;
+ struct ccu_mux_internal mux;
+ struct ccu_common common;
+};
+
+#define SUNXI_CCU_N_WITH_GATE_LOCK(_struct, _name, _parent, _reg, \
+ _mshift, _mwidth, _gate, _lock, \
+ _flags) \
+ struct ccu_mult _struct = { \
+ .enable = _gate, \
+ .mult = _SUNXI_CCU_MULT(_mshift, _mwidth), \
+ .common = { \
+ .reg = _reg, \
+ .hw.init = CLK_HW_INIT(_name, \
+ _parent, \
+ &ccu_mult_ops, \
+ _flags), \
+ }, \
+ }
+
+static inline struct ccu_mult *hw_to_ccu_mult(struct clk_hw *hw)
+{
+ struct ccu_common *common = hw_to_ccu_common(hw);
+
+ return container_of(common, struct ccu_mult, common);
+}
+
+extern const struct clk_ops ccu_mult_ops;
+
#endif /* _CCU_MULT_H_ */
--
2.9.2
More information about the linux-arm-kernel
mailing list