[PATCH 1/6] PCI: xilinx: Keep both legacy and MSI interrupt references.
Bharat Kumar Gogada
bharat.kumar.gogada at xilinx.com
Thu Sep 1 03:14:41 PDT 2016
When built with MSI support the legacy domain reference is being
overwritten with MSI.
Instead creating two separate domains for MSI and legacy interrupts.
Signed-off-by: Bharat Kumar Gogada <bharatku at xilinx.com>
---
drivers/pci/host/pcie-xilinx.c | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)
diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index a30e016..bd64677 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -101,7 +101,8 @@
* @msi_pages: MSI pages
* @root_busno: Root Bus number
* @dev: Device pointer
- * @irq_domain: IRQ domain pointer
+ * @msi_domain: MSI IRQ domain pointer
+ * @leg_domain: Legacy IRQ domain pointer
* @resources: Bus Resources
*/
struct xilinx_pcie_port {
@@ -110,7 +111,8 @@ struct xilinx_pcie_port {
unsigned long msi_pages;
u8 root_busno;
struct device *dev;
- struct irq_domain *irq_domain;
+ struct irq_domain *msi_domain;
+ struct irq_domain *leg_domain;
struct list_head resources;
};
@@ -281,7 +283,7 @@ static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip,
if (hwirq < 0)
return hwirq;
- irq = irq_create_mapping(port->irq_domain, hwirq);
+ irq = irq_create_mapping(port->msi_domain, hwirq);
if (!irq)
return -EINVAL;
@@ -443,7 +445,7 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
/* Handle INTx Interrupt */
val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
- generic_handle_irq(irq_find_mapping(port->irq_domain,
+ generic_handle_irq(irq_find_mapping(port->leg_domain,
val));
}
}
@@ -526,12 +528,14 @@ static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port)
}
for (i = 0; i < num_irqs; i++) {
- irq = irq_find_mapping(port->irq_domain, i);
+ irq = irq_find_mapping(port->leg_domain, i);
if (irq > 0)
irq_dispose_mapping(irq);
}
-
- irq_domain_remove(port->irq_domain);
+ if (port->leg_domain)
+ irq_domain_remove(port->leg_domain);
+ if (port->msi_domain)
+ irq_domain_remove(port->msi_domain);
}
/**
@@ -553,21 +557,21 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
return -ENODEV;
}
- port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
+ port->leg_domain = irq_domain_add_linear(pcie_intc_node, 4,
&intx_domain_ops,
port);
- if (!port->irq_domain) {
+ if (!port->leg_domain) {
dev_err(dev, "Failed to get a INTx IRQ domain\n");
return -ENODEV;
}
/* Setup MSI */
if (IS_ENABLED(CONFIG_PCI_MSI)) {
- port->irq_domain = irq_domain_add_linear(node,
+ port->msi_domain = irq_domain_add_linear(node,
XILINX_NUM_MSI_IRQS,
&msi_domain_ops,
&xilinx_pcie_msi_chip);
- if (!port->irq_domain) {
+ if (!port->msi_domain) {
dev_err(dev, "Failed to get a MSI IRQ domain\n");
return -ENODEV;
}
--
2.1.1
More information about the linux-arm-kernel
mailing list