[PATCH 06/10] iio: adc: stm32: add ext attrs to configure sampling time
Jonathan Cameron
jic23 at kernel.org
Sun Oct 30 07:21:11 PDT 2016
On 25/10/16 17:25, Fabrice Gasnier wrote:
> Add per channel "smpr" IIO extended attribute, to allow sampling
> time configuration.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
First thing is that any attributes need to be documented in
Documentation/ABI/testing/sysfs-bus-iio-*
Secondly this feels rather like it should be possible to use standard ABI for
this. The documentation manages to successfully skip passed the use of
any standard ADC terminology. I'm not actually sure what its
doing when it talks about sampling time... Does this device even have an
inbuilt track and hold? Presumably but who knows... Ah, the document
'How to get the best ADC accuracy in STM32FX ... ' gives some details in the
section on how to deal with high impedance sources. Worth adding a reference
to that for this.
Arguably the 'right' value for these is dependent on the local electrical
properties, so should be described in the device tree rather than tweaked
from userspace.
If you do want to do still want to provide userspace control then it
needs to fit nicely within the IIO ABI. Now arguably it's 'sort of'
integration time but only via a nasty non linear relationship so lets
not abuse that but rather work up something ADC specific.
As such we would be looking at something like.
in_voltageX_track_time and the units should be seconds (it'll be a pain, but
we need to end up with a generic ABI so it has to be in standard units).
It might make sense to add this to the core info_mask element list and
handle it that way. I'm still dubious that this isn't really a hardware
question that should never be exposed to userspace in the first place...
You will need to convince me ;)
A few more specific comments inline.
> ---
> drivers/iio/adc/stm32/stm32-adc.c | 75 +++++++++++++++++++++++++++++++++++++
> drivers/iio/adc/stm32/stm32-adc.h | 25 +++++++++++++
> drivers/iio/adc/stm32/stm32f4-adc.c | 48 ++++++++++++++++++++++++
> 3 files changed, 148 insertions(+)
>
> diff --git a/drivers/iio/adc/stm32/stm32-adc.c b/drivers/iio/adc/stm32/stm32-adc.c
> index 9b4b459..1681f75 100644
> --- a/drivers/iio/adc/stm32/stm32-adc.c
> +++ b/drivers/iio/adc/stm32/stm32-adc.c
> @@ -38,6 +38,61 @@
> #include "stm32-adc.h"
>
> /**
> + * stm32_adc_conf_smp() - Configure sampling time for each channel
> + * @indio_dev: IIO device
> + * @scan_mask: channels to be converted
> + */
> +static int stm32_adc_conf_smp(struct iio_dev *indio_dev,
> + const unsigned long *scan_mask)
> +{
> + struct stm32_adc *adc = iio_priv(indio_dev);
> + const struct stm32_adc_regs *smp =
> + adc->common->data->adc_reginfo->smpr_regs;
> + struct stm32_adc_chan *stm32_chan;
> + const struct iio_chan_spec *chan;
> + u32 bit, val;
> + int i;
> +
> + for_each_set_bit(bit, scan_mask, indio_dev->masklength) {
> + chan = indio_dev->channels + bit;
> + stm32_chan = to_stm32_chan(adc, chan);
> + i = chan->channel;
> +
> + if (i >= adc->max_channels)
> + return -EINVAL;
> +
> + val = stm32_adc_readl(adc, smp[i].reg);
> + val &= ~smp[i].mask;
> + val |= (stm32_chan->smpr << smp[i].shift) & smp[i].mask;
> + stm32_adc_writel(adc, smp[i].reg, val);
> + }
> +
> + return 0;
> +}
> +
> +int stm32_adc_set_smpr(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan, unsigned int smpr)
> +{
> + struct stm32_adc *adc = iio_priv(indio_dev);
> + struct stm32_adc_chan *stm32_chan = to_stm32_chan(adc, chan);
> +
> + stm32_chan->smpr = smpr;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(stm32_adc_set_smpr);
> +
> +int stm32_adc_get_smpr(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan)
> +{
> + struct stm32_adc *adc = iio_priv(indio_dev);
> + struct stm32_adc_chan *stm32_chan = to_stm32_chan(adc, chan);
> +
> + return stm32_chan->smpr;
> +}
> +EXPORT_SYMBOL_GPL(stm32_adc_get_smpr);
> +
> +/**
> * stm32_adc_conf_scan_seq() - Build regular or injected channels scan sequence
> * @indio_dev: IIO device
> * @scan_mask: channels to be converted
> @@ -126,6 +181,12 @@ static int stm32_adc_conf_scan(struct iio_dev *indio_dev,
> return ret;
> }
>
> + ret = stm32_adc_conf_smp(indio_dev, scan_mask);
> + if (ret) {
> + dev_err(&indio_dev->dev, "Failed to configure samp time\n");
> + goto err_dis;
> + }
> +
> ret = stm32_adc_conf_scan_seq(indio_dev, scan_mask);
> if (ret) {
> dev_err(&indio_dev->dev, "Failed to configure sequence\n");
> @@ -938,6 +999,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev,
> const struct stm32_adc_info *adc_info)
> {
> struct stm32_adc *adc = iio_priv(indio_dev);
> + struct stm32_adc_common *common = adc->common;
> struct device_node *node = indio_dev->dev.of_node;
> struct property *prop;
> const __be32 *cur;
> @@ -945,6 +1007,19 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev,
> int scan_index = 0, num_channels = 0;
> u32 val;
>
> + if (!common->stm32_chans[adc->id]) {
> + /* Allocate extended attributes structure for an instance */
> + struct stm32_adc_chan *stm32_chans;
> +
> + stm32_chans = devm_kcalloc(&indio_dev->dev,
> + adc_info->max_channels,
> + sizeof(*stm32_chans), GFP_KERNEL);
> + if (!stm32_chans)
> + return -ENOMEM;
> +
> + common->stm32_chans[adc->id] = stm32_chans;
> + }
> +
> of_property_for_each_u32(node, "st,adc-channels", prop, cur, val)
> num_channels++;
>
> diff --git a/drivers/iio/adc/stm32/stm32-adc.h b/drivers/iio/adc/stm32/stm32-adc.h
> index 6c9b70d..8cf1d5c 100644
> --- a/drivers/iio/adc/stm32/stm32-adc.h
> +++ b/drivers/iio/adc/stm32/stm32-adc.h
> @@ -143,6 +143,14 @@ struct stm32_adc_chan_spec {
> };
>
> /**
> + * struct stm32_adc_chan - Extended specifications of stm32 adc channels
> + * @smpr: per channel sampling time selection
> + */
> +struct stm32_adc_chan {
> + unsigned smpr:3;
> +};
> +
> +/**
> * struct stm32_adc_trig_info - ADC trigger info
> * @extsel: trigger selection for regular or injected
> * @name: name of the trigger, corresponding to its source
> @@ -206,6 +214,7 @@ struct stm32_adc_trig_reginfo {
> * @jdr: injected data registers offsets
> * @sqr_regs: Regular sequence registers description
> * @jsqr_reg: Injected sequence register description
> + * @smpr_regs: Sampling time registers description
> * @trig_reginfo: regular trigger control registers description
> * @jtrig_reginfo: injected trigger control registers description
> */
> @@ -220,6 +229,7 @@ struct stm32_adc_reginfo {
> u32 jdr[4];
> const struct stm32_adc_regs *sqr_regs;
> const struct stm32_adc_regs *jsqr_reg;
> + const struct stm32_adc_regs *smpr_regs;
> const struct stm32_adc_trig_reginfo *trig_reginfo;
> const struct stm32_adc_trig_reginfo *jtrig_reginfo;
> };
> @@ -328,6 +338,7 @@ struct stm32_adc {
> * @aclk: common clock for the analog circuitry
> * @vref: regulator reference
> * @vref_mv: vref voltage (mv)
> + * @stm32_chans: stm32 channels extended specification data
> * @gpio_descs: gpio descriptor used to configure EXTi triggers
> * @lock: mutex
> */
> @@ -341,11 +352,21 @@ struct stm32_adc_common {
> struct clk *aclk;
> struct regulator *vref;
> int vref_mv;
> + struct stm32_adc_chan *stm32_chans[STM32_ADC_ID_MAX];
> struct gpio_descs *gpios;
> struct mutex lock; /* read_raw lock */
> };
>
> /* Helper routines */
> +static inline struct stm32_adc_chan *to_stm32_chan(struct stm32_adc *adc,
> + const struct iio_chan_spec
> + *chan)
> +{
> + struct stm32_adc_chan *stm32_chans = adc->common->stm32_chans[adc->id];
> +
> + return &stm32_chans[chan->channel];
> +}
> +
> static inline int stm32_adc_start_conv(struct stm32_adc *adc)
> {
> return adc->common->data->start_conv(adc);
> @@ -458,6 +479,10 @@ static inline void stm32_adc_clr_bits(struct stm32_adc *adc, u32 reg, u32 bits)
>
> /* STM32 common extended attributes */
> extern const struct iio_enum stm32_adc_trig_pol;
> +int stm32_adc_set_smpr(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan, unsigned int smpr);
> +int stm32_adc_get_smpr(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan);
> int stm32_adc_probe(struct platform_device *pdev);
> int stm32_adc_remove(struct platform_device *pdev);
>
> diff --git a/drivers/iio/adc/stm32/stm32f4-adc.c b/drivers/iio/adc/stm32/stm32f4-adc.c
> index e033a68..e0e6211 100644
> --- a/drivers/iio/adc/stm32/stm32f4-adc.c
> +++ b/drivers/iio/adc/stm32/stm32f4-adc.c
> @@ -330,6 +330,32 @@ enum stm32f4_adc_smpr {
> };
>
> /**
> + * stm32f4_smpr_regs[] - describe sampling time registers & bit fields
> + * Sorted so it can be indexed by channel number.
> + */
> +static const struct stm32_adc_regs stm32f4_smpr_regs[] = {
> + { STM32F4_ADCX_SMPR2, STM32F4_SMP0_MASK, STM32F4_SMP0_SHIFT },
> + { STM32F4_ADCX_SMPR2, STM32F4_SMP1_MASK, STM32F4_SMP1_SHIFT },
> + { STM32F4_ADCX_SMPR2, STM32F4_SMP2_MASK, STM32F4_SMP2_SHIFT },
> + { STM32F4_ADCX_SMPR2, STM32F4_SMP3_MASK, STM32F4_SMP3_SHIFT },
> + { STM32F4_ADCX_SMPR2, STM32F4_SMP4_MASK, STM32F4_SMP4_SHIFT },
> + { STM32F4_ADCX_SMPR2, STM32F4_SMP5_MASK, STM32F4_SMP5_SHIFT },
> + { STM32F4_ADCX_SMPR2, STM32F4_SMP6_MASK, STM32F4_SMP6_SHIFT },
> + { STM32F4_ADCX_SMPR2, STM32F4_SMP7_MASK, STM32F4_SMP7_SHIFT },
> + { STM32F4_ADCX_SMPR2, STM32F4_SMP8_MASK, STM32F4_SMP8_SHIFT },
> + { STM32F4_ADCX_SMPR2, STM32F4_SMP9_MASK, STM32F4_SMP9_SHIFT },
> + { STM32F4_ADCX_SMPR1, STM32F4_SMP10_MASK, STM32F4_SMP10_SHIFT },
> + { STM32F4_ADCX_SMPR1, STM32F4_SMP11_MASK, STM32F4_SMP11_SHIFT },
> + { STM32F4_ADCX_SMPR1, STM32F4_SMP12_MASK, STM32F4_SMP12_SHIFT },
> + { STM32F4_ADCX_SMPR1, STM32F4_SMP13_MASK, STM32F4_SMP13_SHIFT },
> + { STM32F4_ADCX_SMPR1, STM32F4_SMP14_MASK, STM32F4_SMP14_SHIFT },
> + { STM32F4_ADCX_SMPR1, STM32F4_SMP15_MASK, STM32F4_SMP15_SHIFT },
> + { STM32F4_ADCX_SMPR1, STM32F4_SMP16_MASK, STM32F4_SMP16_SHIFT },
> + { STM32F4_ADCX_SMPR1, STM32F4_SMP17_MASK, STM32F4_SMP17_SHIFT },
> + { STM32F4_ADCX_SMPR1, STM32F4_SMP18_MASK, STM32F4_SMP18_SHIFT },
> +};
> +
> +/**
> * stm32f4_sqr_regs - describe regular sequence registers
> * - L: sequence len (register & bit field)
> * - SQ1..SQ16: sequence entries (register & bit field)
> @@ -407,6 +433,7 @@ enum stm32f4_adc_smpr {
> },
> .sqr_regs = stm32f4_sqr_regs,
> .jsqr_reg = stm32f4_jsqr_reg,
> + .smpr_regs = stm32f4_smpr_regs,
> .trig_reginfo = &stm32f4_adc_trig_reginfo,
> .jtrig_reginfo = &stm32f4_adc_jtrig_reginfo,
> };
> @@ -555,7 +582,28 @@ static int stm32f4_adc_clk_sel(struct stm32_adc *adc)
> return 0;
> }
>
> +/* stm32f4_smpr_items : Channel-wise programmable sampling time */
> +static const char * const stm32f4_smpr_items[] = {
> + [STM32F4_SMPR_3_CK_CYCLES] = "3_cycles",
> + [STM32F4_SMPR_15_CK_CYCLES] = "15_cycles",
> + [STM32F4_SMPR_28_CK_CYCLES] = "28_cycles",
> + [STM32F4_SMPR_56_CK_CYCLES] = "56_cycles",
> + [STM32F4_SMPR_84_CK_CYCLES] = "84_cycles",
> + [STM32F4_SMPR_112_CK_CYCLES] = "112_cycles",
> + [STM32F4_SMPR_144_CK_CYCLES] = "144_cycles",
> + [STM32F4_SMPR_480_CK_CYCLES] = "480_cycles",
This is a whole level of nasty magic numbers. Always take real numeric
values and either provide an _available attribute listing the options,
or if appropriate round to the next best (probably up here).
Units shouldn't be in cycles as that has no meaning without a deep and
dirty knowledge of what clocks are being fed to the device. Stuff that
is at least tricky for userspace to work out. THis is a time, so it
should be in seconds.
> +};
> +
> +static const struct iio_enum stm32f4_smpr = {
> + .items = stm32f4_smpr_items,
> + .num_items = ARRAY_SIZE(stm32f4_smpr_items),
> + .get = stm32_adc_get_smpr,
> + .set = stm32_adc_set_smpr,
> +};
> +
> static const struct iio_chan_spec_ext_info stm32f4_adc_ext_info[] = {
> + IIO_ENUM("smpr", IIO_SEPARATE, &stm32f4_smpr),
> + IIO_ENUM_AVAILABLE("smpr", &stm32f4_smpr),
> IIO_ENUM("trigger_pol", IIO_SHARED_BY_ALL, &stm32_adc_trig_pol),
> {
> .name = "trigger_pol_available",
>
More information about the linux-arm-kernel
mailing list