[PATCH v2 6/6] arm64: dts: NS2: add AMAC ethernet support

Jon Mason jon.mason at broadcom.com
Fri Oct 28 13:56:59 PDT 2016


Add support for the AMAC ethernet to the Broadcom Northstar2 SoC device
tree

Signed-off-by: Jon Mason <jon.mason at broadcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2-svk.dts |  5 +++++
 arch/arm64/boot/dts/broadcom/ns2.dtsi    | 12 ++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 2d7872a..9e5c3c9 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -56,6 +56,10 @@
 	};
 };
 
+&enet {
+	status = "ok";
+};
+
 &pci_phy0 {
 	status = "ok";
 };
@@ -172,6 +176,7 @@
 &mdio_mux_iproc {
 	mdio at 10 {
 		gphy0: eth-phy at 10 {
+			brcm,enet-phy-lane-swap;
 			reg = <0x10>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index d95dc40..773ed59 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -191,6 +191,18 @@
 
 		#include "ns2-clock.dtsi"
 
+		enet: ethernet at 61000000 {
+			compatible = "brcm,ns2-amac";
+			reg = <0x61000000 0x1000>,
+			      <0x61090000 0x1000>,
+			      <0x61030000 0x100>;
+			reg-names = "amac_base", "idm_base", "nicpm_base";
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			phy-handle = <&gphy0>;
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+
 		dma0: dma at 61360000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x61360000 0x1000>;
-- 
2.7.4




More information about the linux-arm-kernel mailing list