[PATCH 1/2] PCI: iproc: Support DT property for ignoring aborts when probing

[Florian Fainelli]

On 10/28/2016 09:58 AM, Ray Jui wrote:
> Hi Rafal,
> 
> On 10/28/2016 8:31 AM, Rafał Miłecki wrote:
>> On 20 April 2016 at 20:18, Ray Jui <ray.jui at broadcom.com> wrote:
>>> Hi Rafal/Florian/Arnd,
>>>
>>> After a couple days of email exchange with the ASIC team, I think I've
>>> figured out the behavior on all of the Broadcom SoCs that use this iProc
>>> PCIe controller.
>>>
>>> On NSP, Cygnus, and NS2:
>>> - There's an APB error enable register at offset 0xf40 from the iProc PCIe
>>> controller's base address. If one clears bit 0 (enabled by default after
>>> chip POR) of that register, one can stop this from being forwarded to "iProc
>>> host" as an APB error/external imprecise abort
>>> - I will submit a patch to the iProc PCIe driver to disable this error
>>> forwarding
>>>
>>> On NS:
>>> - Unfortunately, there's no such control register in NS. In other words, we
>>> cannot disable this error at the PCIe controller level
>>> - FSR code corresponds to external (bit[12] = '1'), read (bit[11] = '0'),
>>> imprecise abort (bits[10][3:0] = '1''0110'), i.e., external imprecise abort
>>> triggered by read access. Our ASIC team believes a read access to a
>>> non-exist APB register can also trigger an abort with the same FSR code.
>>> Note this is the tricky part, by registering an abort hook that skips this
>>> particular FSR, one has a chance of skipping other aborts triggered by
>>> accessing invalid APB registers. But given that this cannot be disabled for
>>> the PCIe controller NS, I'm not sure what approach we should take. Any
>>> thoughts?
>>
>> It's really late reply but I wanted to finally handle this problem.
>>
>> From Ray's e-mail it seems Northstar is the only platform requiring
>> this workaround. So we don't have to worry about arm64.
> 
> Yes, Northstar is the only platform that requires this workaround. Even
> the arm32 platforms like NSP and Cygnus can disable unsupported request
> being forwarded as APB error. I've recently sent out a patch series to
> fix this for all other platforms, and sorry I should have included you
> in the email but I did not. I'll include you when revision 2 is sent out.
> 
>>
>> We have two options then:
>> 1) Add workaround in arch/arm/mach-bcm/bcm_5301x.c
>> 2) Add workaround into built-in drivers/pci/host/pcie-iproc-fault.c
> 
> How do you plan to implement pcie-iproc-fault.c? If it's similar to what
> you have now, then I think it fits more to bcm_5301x.c

I was going to suggest adding it to the PCIe driver so as to make it
localized there, but that seems like a better idea, in case the PCIe
driver is not built into the kernel, or as a module, it seems like a
nice thing to be able to clear the abort.
-- 
Florian