[SPAM][PATCH 2/3] irqchip: mtk-cirq: Add mediatek mtk-cirq implement

[Yingjoe Chen]

On Thu, 2016-10-13 at 13:06 +0800, Youlin Pei wrote:
> This commit add the mtk-cirq implement for mt2701.
> 
> Signed-off-by: Youlin Pei <youlin.pei at mediatek.com>
> ---
>  drivers/irqchip/Makefile       |    2 +-
>  drivers/irqchip/irq-mtk-cirq.c |  257 ++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 258 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/irqchip/irq-mtk-cirq.c
> 
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 4c203b6..eee95c6 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -59,7 +59,7 @@ obj-$(CONFIG_BCM7120_L2_IRQ)		+= irq-bcm7120-l2.o
>  obj-$(CONFIG_BRCMSTB_L2_IRQ)		+= irq-brcmstb-l2.o
>  obj-$(CONFIG_KEYSTONE_IRQ)		+= irq-keystone.o
>  obj-$(CONFIG_MIPS_GIC)			+= irq-mips-gic.o
> -obj-$(CONFIG_ARCH_MEDIATEK)		+= irq-mtk-sysirq.o
> +obj-$(CONFIG_ARCH_MEDIATEK)		+= irq-mtk-sysirq.o irq-mtk-cirq.o
>  obj-$(CONFIG_ARCH_DIGICOLOR)		+= irq-digicolor.o
>  obj-$(CONFIG_RENESAS_H8300H_INTC)	+= irq-renesas-h8300h.o
>  obj-$(CONFIG_RENESAS_H8S_INTC)		+= irq-renesas-h8s.o
> diff --git a/drivers/irqchip/irq-mtk-cirq.c b/drivers/irqchip/irq-mtk-cirq.c
> new file mode 100644
> index 0000000..544767d
> --- /dev/null
> +++ b/drivers/irqchip/irq-mtk-cirq.c
> @@ -0,0 +1,257 @@
> +/*
> + * Copyright (c) 2016 MediaTek Inc.
> + * Author: Youlin.Pei <youlin.pei at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqdomain.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/syscore_ops.h>
> +
> +#define CIRQ_MASK_SET	0xC0
> +#define CIRQ_MASK_CLR	0x100
> +#define CIRQ_SENS_SET	0x180
> +#define CIRQ_SENS_CLR	0x1C0

nit: please use lower case for hex value

> +#define CIRQ_POL_SET	0x240
> +#define CIRQ_POL_CLR	0x280
> +#define CIRQ_CONTROL	0x300
> +
> +#define CIRQ_EN		0x1

nit: please align

> +#define CIRQ_EDGE	0x2
> +#define CIRQ_FLUSH	0x4
> +
> +#define CIRQ_IRQ_NUM    0x200
> +
> +struct mtk_cirq_chip_data {
> +	void __iomem *base;
> +	unsigned int ext_irq_start;
> +};
> +

<deleted..>

> +
> +static int __init mtk_cirq_of_init(struct device_node *node,
> +				   struct device_node *parent)
> +{
> +	struct irq_domain *domain, *domain_parent;
> +	int ret;
> +
> +	domain_parent = irq_find_host(parent);
> +	if (!domain_parent) {
> +		pr_err("mtk_cirq: interrupt-parent not found\n");
> +		return -EINVAL;
> +	}
> +
> +	cirq_data = kzalloc(sizeof(*cirq_data), GFP_KERNEL);
> +	if (!cirq_data)
> +		return -ENOMEM;
> +
> +	cirq_data->base = of_iomap(node, 0);
> +	if (!cirq_data->base) {
> +		pr_err("mtk_cirq: unable to map cirq register\n");
> +		ret = -ENXIO;
> +		goto out_free;
> +	}
> +
> +	if (of_property_read_u32(node, "mediatek,ext-irq-start",
> +				 &cirq_data->ext_irq_start)) {
> +		ret = -EINVAL;
> +		goto out_free;

Please propagate error returned from of_property_read_u32
Should goto out_unmap when fail here.

Joe.C

> +	}
> +
> +	domain = irq_domain_add_hierarchy(domain_parent, 0, CIRQ_IRQ_NUM, node,
> +					  &cirq_domain_ops, cirq_data);
> +	if (!domain) {
> +		ret = -ENOMEM;
> +		goto out_unmap;
> +	}
> +
> +	mtk_cirq_syscore_init();
> +
> +	return 0;
> +
> +out_unmap:
> +	iounmap(cirq_data->base);
> +out_free:
> +	kfree(cirq_data);
> +	return ret;
> +}
> +
> +IRQCHIP_DECLARE(mtk_cirq, "mediatek,mt2701-cirq", mtk_cirq_of_init);