[PATCH 5/5] ARM: OMAP5: Enable minimal cpuidle for omap5 retention

[Tony Lindgren]

This allows the CPUs to enter retention during idle and takes the idle
power consumption down quite a bit. On omap5-uevm, the power consumption
eventually settles down to about 920mW with ehci-omap and ohci-omap3
unloaded compared to about 1.7W without these patches. Note that it
seems to take few minutes after booting for the idle power to go down
to 920mW from 1.3W, no idea so far what might be causing that.

Note that the TI kernel supports more modes in the v3.8 kernel, but
the omap5 specific states can be added later.

Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 arch/arm/mach-omap2/cpuidle44xx.c | 2 +-
 arch/arm/mach-omap2/pm44xx.c      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -300,7 +300,7 @@ int __init omap4_idle_init(void)
 {
 	struct cpuidle_driver *idle_driver;
 
-	if (soc_is_dra7xx()) {
+	if (soc_is_dra7xx() || soc_is_omap54xx()) {
 		state_ptr = &dra7_idle_data[0];
 		idle_driver = &dra7_idle_driver;
 	} else {
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -287,7 +287,7 @@ int __init omap4_pm_init(void)
 	/* Overwrite the default cpu_do_idle() */
 	arm_pm_idle = omap_default_idle;
 
-	if (cpu_is_omap44xx() || soc_is_dra7xx())
+	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
 		omap4_idle_init();
 
 err2:
-- 
2.9.3