[PATCH v6 00/16] ACPI IORT ARM SMMU support
Lorenzo Pieralisi
lorenzo.pieralisi at arm.com
Wed Oct 26 04:04:59 PDT 2016
Rafael, Joerg (and anyone else CC'ed),
On Tue, Oct 18, 2016 at 05:03:58PM +0100, Lorenzo Pieralisi wrote:
> This patch series is v6 of a previous posting:
>
> https://lkml.org/lkml/2016/9/9/418
>
> v5 -> v6
> - Rebased against v4.9-rc1
> - Changed FWNODE_IOMMU to FWNODE_ACPI_STATIC
> - Moved platform devices creation into IORT code
> - Updated fwnode handling
> - Added default dma masks initialization
Any comments on v6 ? Patches touching generic ACPI code
are {1, 2, 7}, patch 4 updates the IOMMU of_iommu_{set/get}_ops()
API to make it work on ACPI systems too, by replacing the
device_node with a fwnode_handle pointer as look-up token;
the remainder of patches are ARM specific and creates the
infrastructure to probe ARM SMMU devices through ACPI,
ARM IORT table in particular. Given the generic bits changes
above I would not leave it to late -rc to reach an agreement
please, thank you.
Cheers,
Lorenzo
> v4 -> v5
> - Added SMMUv1/v2 support
> - Rebased against v4.8-rc5 and dependencies series
> - Consolidated IORT platform devices creation
>
> v3 -> v4
> - Added single mapping API (for IORT named components)
> - Fixed arm_smmu_iort_xlate() return value
> - Reworked fwnode registration and platform device creation
> ordering to fix probe ordering dependencies
> - Added code to keep device_node ref count with new iommu
> fwspec API
> - Added patch to make iommu_fwspec arch agnostic
> - Dropped RFC status
> - Rebased against v4.8-rc2
>
> v2 -> v3
> - Rebased on top of dependencies series [1][2][3](v4.7-rc3)
> - Added back reliance on ACPI early probing infrastructure
> - Patch[1-3] merged through other dependent series
> - Added back IOMMU fwnode generalization
> - Move SMMU v3 static functions configuration to IORT code
> - Implemented generic IOMMU fwspec API
> - Added code to implement fwnode platform device look-up
>
> v1 -> v2:
> - Rebased on top of dependencies series [1][2][3](v4.7-rc1)
> - Removed IOMMU fwnode generalization
> - Implemented ARM SMMU v3 ACPI probing instead of ARM SMMU v2
> owing to patch series dependencies [1]
> - Moved platform device creation logic to IORT code to
> generalize its usage for ARM SMMU v1-v2-v3 components
> - Removed reliance on ACPI early device probing
> - Created IORT specific iommu_xlate() translation hook leaving
> OF code unchanged according to v1 reviews
>
> The ACPI IORT table provides information that allows instantiating
> ARM SMMU devices and carrying out id mappings between components on
> ARM based systems (devices, IOMMUs, interrupt controllers).
>
> http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf
>
> Building on basic IORT support, this patchset enables ARM SMMUs support
> on ACPI systems.
>
> Most of the code is aimed at building the required generic ACPI
> infrastructure to create and enable IOMMU components and to bring
> the IOMMU infrastructure for ACPI on par with DT, which is going to
> make future ARM SMMU components easier to integrate.
>
> PATCH (1) adds a FWNODE_ACPI_STATIC type to the struct fwnode_handle type.
> It is required to attach a fwnode identifier to platform
> devices allocated/detected through static ACPI table entries
> (ie IORT tables entries).
> IOMMU devices have to have an identifier to look them up
> eg IOMMU core layer carrying out id translation. This can be
> done through a fwnode_handle (ie IOMMU platform devices created
> out of IORT tables are not ACPI devices hence they can't be
> allocated as such, otherwise they would have a fwnode_handle of
> type FWNODE_ACPI).
>
> PATCH (2) makes use of the ACPI early probing API to add a linker script
> section for probing devices via IORT ACPI kernel code.
>
> PATCH (3) provides IORT support for registering IOMMU IORT node through
> their fwnode handle.
>
> PATCH (4) make of_iommu_{set/get}_ops() functions DT agnostic.
>
> PATCH (5) convert ARM SMMU driver to use fwnode instead of of_node as
> look-up and iommu_ops retrieval token.
>
> PATCH (6) convert ARM SMMU v3 driver to use fwnode instead of of_node as
> look-up and iommu_ops retrieval token.
>
> PATCH (7) implements the of_dma_configure() API in ACPI world -
> acpi_dma_configure() - and patches PCI and ACPI core code to
> start making use of it.
>
> PATCH (8) provides an IORT function to detect existence of specific type
> of IORT components.
>
> PATCH (9) creates the kernel infrastructure required to create ARM SMMU
> platform devices for IORT nodes.
>
> PATCH (10) refactors the ARM SMMU v3 driver so that the init functions are
> split in a way that groups together code that probes through DT
> and code that carries out HW registers FW agnostic probing, in
> preparation for adding the ACPI probing path.
>
> PATCH (11) adds ARM SMMU v3 IORT IOMMU operations to create and probe
> ARM SMMU v3 components.
>
> PATCH (12) refactors the ARM SMMU v1/v2 driver so that the init functions
> are split in a way that groups together code that probes
> through DT and code that carries out HW registers FW agnostic
> probing, in preparation for adding the ACPI probing path.
>
> PATCH (13) adds ARM SMMU v1/v2 IORT IOMMU operations to create and
> probe ARM SMMU v1/v2 components.
>
> PATCH (14) Extend the IORT iort_node_map_rid() to work on a type mask
> instead of a single type so that the translation API can
> be used on a range of components.
>
> PATCH (15) Add IORT API to carry out id mappings for components that do
> do not have an input identifier/RIDs (ie named components).
>
> PATCH (16) provides IORT infrastructure to carry out IOMMU configuration
> for devices and hook it up to the previously introduced ACPI
> DMA configure API.
>
> This patchset is provided for review/testing purposes here:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git acpi/iort-smmu-v6
>
> Tested on Juno and FVP models for ARM SMMU v1 and v3 probing path.
>
> Lorenzo Pieralisi (16):
> drivers: acpi: add FWNODE_ACPI_STATIC fwnode type
> drivers: acpi: iort: introduce linker section for IORT entries probing
> drivers: acpi: iort: add support for IOMMU fwnode registration
> drivers: iommu: make of_iommu_set/get_ops() DT agnostic
> drivers: iommu: arm-smmu: convert struct device of_node to fwnode
> usage
> drivers: iommu: arm-smmu-v3: convert struct device of_node to fwnode
> usage
> drivers: acpi: implement acpi_dma_configure
> drivers: acpi: iort: add node match function
> drivers: acpi: iort: add support for ARM SMMU platform devices
> creation
> drivers: iommu: arm-smmu-v3: split probe functions into DT/generic
> portions
> drivers: iommu: arm-smmu-v3: add IORT configuration
> drivers: iommu: arm-smmu: split probe functions into DT/generic
> portions
> drivers: iommu: arm-smmu: add IORT configuration
> drivers: acpi: iort: replace rid map type with type mask
> drivers: acpi: iort: add single mapping function
> drivers: acpi: iort: introduce iort_iommu_configure
>
> drivers/acpi/arm64/iort.c | 586 +++++++++++++++++++++++++++++++++++++-
> drivers/acpi/glue.c | 4 +-
> drivers/acpi/scan.c | 45 +++
> drivers/iommu/arm-smmu-v3.c | 105 +++++--
> drivers/iommu/arm-smmu.c | 155 ++++++++--
> drivers/iommu/iommu.c | 43 +++
> drivers/iommu/of_iommu.c | 39 ---
> drivers/pci/probe.c | 3 +-
> include/acpi/acpi_bus.h | 2 +
> include/asm-generic/vmlinux.lds.h | 1 +
> include/linux/acpi.h | 26 ++
> include/linux/acpi_iort.h | 14 +
> include/linux/fwnode.h | 3 +-
> include/linux/iommu.h | 14 +
> include/linux/of_iommu.h | 12 +-
> 15 files changed, 951 insertions(+), 101 deletions(-)
>
> --
> 2.10.0
>
More information about the linux-arm-kernel
mailing list