[PATCH 2/6] arm: dts: ls1021a: update MSI node
Minghuan Lian
Minghuan.Lian at nxp.com
Tue Oct 25 05:35:41 PDT 2016
1. Change compatible to "fsl,ls-scfg-msi"
2. Move two MSI dts node into the parent node "msi-controller".
So a PCIe device can request the MSI from the two MSI controllers.
Signed-off-by: Minghuan Lian <Minghuan.Lian at nxp.com>
---
arch/arm/boot/dts/ls1021a.dtsi | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 368e219..7a3b510 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -119,18 +119,22 @@
};
- msi1: msi-controller at 1570e00 {
- compatible = "fsl,1s1021a-msi";
- reg = <0x0 0x1570e00 0x0 0x8>;
+ msi: msi-controller {
+ compatible = "fsl,ls-scfg-msi";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
msi-controller;
- interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
- };
- msi2: msi-controller at 1570e08 {
- compatible = "fsl,1s1021a-msi";
- reg = <0x0 0x1570e08 0x0 0x8>;
- msi-controller;
- interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ msi0 at 1570e00 {
+ reg = <0x0 0x1570e00 0x0 0x8>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ msi1 at 1570e08 {
+ reg = <0x0 0x1570e08 0x0 0x8>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
ifc: ifc at 1530000 {
@@ -643,7 +647,7 @@
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&msi1>;
+ msi-parent = <&msi>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -666,7 +670,7 @@
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&msi2>;
+ msi-parent = <&msi>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
--
1.9.1
More information about the linux-arm-kernel
mailing list