[PATCH v2 2/3] ARM: dts: stm32f429: Fix Ethernet node on Eval Board

[Alexandre TORGUE]

"phy-handle" entry is mandatory when mdio subnode is used in
Ethernet node.

Signed-off-by: Alexandre TORGUE <alexandre.torgue at st.com>

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index fa30bf1..a11b108 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -99,7 +99,7 @@
 	pinctrl-0	= <&ethernet_mii>;
 	pinctrl-names	= "default";
 	phy-mode	= "mii";
-
+	phy-handle	= <&phy1>;
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
1.9.1