[PATCH v5 5/7] ARM: dts: sun8i-h3: add HDMI audio and video nodes
Jean-Francois Moine
moinejf at free.fr
Fri Oct 21 03:01:01 PDT 2016
Signed-off-by: Jean-Francois Moine <moinejf at free.fr>
---
The patch for the A83T DT is not included in this patchset because
the clock driver sunxi-ng does not support the A83T clocks.
---
arch/arm/boot/dts/sun8i-h3.dtsi | 67 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 75a8654..869f3be 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -140,6 +140,16 @@
#size-cells = <1>;
ranges;
+ de: de-controller at 01000000 {
+ compatible = "allwinner,sun8i-h3-display-engine";
+ reg = <0x01000000 0x400000>;
+ clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>;
+ clock-names = "gate", "clock";
+ resets = <&ccu RST_BUS_DE>;
+ ports = <&lcd0_p>;
+ status = "disabled";
+ };
+
dma: dma-controller at 01c02000 {
compatible = "allwinner,sun8i-h3-dma";
reg = <0x01c02000 0x1000>;
@@ -149,6 +159,23 @@
#dma-cells = <1>;
};
+ lcd0: lcd-controller at 01c0c000 {
+ compatible = "allwinner,sun8i-a83t-lcd";
+ reg = <0x01c0c000 0x400>;
+ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+ clock-names = "gate", "clock";
+ resets = <&ccu RST_BUS_TCON0>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ lcd0_p: port {
+ lcd0_hdmi: endpoint {
+ remote-endpoint = <&hdmi_lcd0>;
+ };
+ };
+ };
+
mmc0: mmc at 01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
@@ -439,6 +466,22 @@
status = "disabled";
};
+ i2s2: i2s at 1c22800 {
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22800 0x60>;
+ clocks = <&ccu CLK_I2S2>;
+ clock-names = "mod";
+ resets = <&ccu RST_BUS_I2S2>;
+ dmas = <&dma 27>;
+ dma-names = "tx";
+ status = "disabled";
+ port {
+ i2s2_hdmi: endpoint {
+ remote-endpoint = <&hdmi_i2s2>;
+ };
+ };
+ };
+
uart0: serial at 01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@@ -541,6 +584,30 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ hdmi: hdmi at 01ee0000 {
+ compatible = "allwinner,sun8i-h3-hdmi";
+ reg = <0x01ee0000 0x20000>;
+ clocks = <&ccu CLK_HDMI>, <&ccu CLK_HDMI_DDC>;
+ clock-names = "clock", "ddc-clock";
+ resets = <&ccu RST_BUS_HDMI0>, <&ccu RST_BUS_HDMI1>;
+ reset-names = "hdmi0", "hdmi1";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port at 0 {
+ reg = <0>;
+ hdmi_lcd0: endpoint {
+ remote-endpoint = <&lcd0_hdmi>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ hdmi_i2s2: endpoint {
+ remote-endpoint = <&i2s2_hdmi>;
+ };
+ };
+ };
+
rtc: rtc at 01f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
--
2.10.1
More information about the linux-arm-kernel
mailing list