[PATCH v3 1/3] mtd: s3c2410: make ecc mode configurable via platform data

[Krzysztof Kozlowski]

On Sat, Oct 22, 2016 at 02:29:07PM +0200, Boris Brezillon wrote:
> Hi Krzysztof,
> 
> On Fri, 21 Oct 2016 21:27:10 +0300
> Krzysztof Kozlowski <krzk at kernel.org> wrote:
> 
> > On Thu, Oct 20, 2016 at 07:42:44PM -0200, Sergio Prado wrote:
> > > Removing CONFIG_MTD_NAND_S3C2410_HWECC option and adding a ecc_mode
> > > field in the drivers's platform data structure so it can be selectable
> > > via platform data.
> > > 
> > > Also setting this field to NAND_ECC_SOFT in all boards using this
> > > driver since none of them had CONFIG_MTD_NAND_S3C2410_HWECC enabled.
> > > 
> > > Signed-off-by: Sergio Prado <sergio.prado at e-labworks.com>
> > > ---
> > >  arch/arm/mach-s3c24xx/common-smdk.c            |   1 +
> > >  arch/arm/mach-s3c24xx/mach-anubis.c            |   1 +
> > >  arch/arm/mach-s3c24xx/mach-at2440evb.c         |   1 +
> > >  arch/arm/mach-s3c24xx/mach-bast.c              |   1 +
> > >  arch/arm/mach-s3c24xx/mach-gta02.c             |   1 +
> > >  arch/arm/mach-s3c24xx/mach-jive.c              |   1 +
> > >  arch/arm/mach-s3c24xx/mach-mini2440.c          |   1 +
> > >  arch/arm/mach-s3c24xx/mach-osiris.c            |   1 +
> > >  arch/arm/mach-s3c24xx/mach-qt2410.c            |   1 +
> > >  arch/arm/mach-s3c24xx/mach-rx1950.c            |   1 +
> > >  arch/arm/mach-s3c24xx/mach-rx3715.c            |   1 +
> > >  arch/arm/mach-s3c24xx/mach-vstms.c             |   1 +
> > >  arch/arm/mach-s3c64xx/mach-hmt.c               |   1 +
> > >  arch/arm/mach-s3c64xx/mach-mini6410.c          |   1 +
> > >  arch/arm/mach-s3c64xx/mach-real6410.c          |   1 +
> > >  drivers/mtd/nand/Kconfig                       |   9 --
> > >  drivers/mtd/nand/s3c2410.c                     | 119 +++++++++++++------------
> > >  include/linux/platform_data/mtd-nand-s3c2410.h |   6 +-
> > >  18 files changed, 79 insertions(+), 70 deletions(-)
> > >  
> > 
> > I acked this twice (v1 and v2)... and still you are ignoring them. I am
> > sorry, I am not gonna to ack this third time!
> > 
> > For v2 I acked also other patches but it it is not there as well...
> 
> I'll collect your acks (and Rob ones) when applying the patches. BTW,
> how should I proceed with patch 1? Do you want an topic branch
> containing this patch?

I don't expect much work around these files so the risk of conflicts is
rather small. You could put it on a topic branch just in case (so I
could pull in if needed) but I am fine with applying these to your tree
as is.

Best regards,
Krzysztof