[PATCH v14 0/4] Add clock support for Mediatek MT2701

Erin Lo erin.lo at mediatek.com
Thu Oct 20 20:32:18 PDT 2016


This series is based on v4.9-rc1, add clock and reset controller support
for Mediatek MT2701.

changes since v13:
- Rebase to v4.9-rc1.

changes since v12:
- Rebase to clk-next.
- Use CLK_OF_DECLARE_DRIVER() instead of CLK_OF_DECLARE().
- Use dev_* and devm_* APIs instead of pr_* and ioremap().
- Refine init functions. Share error messages in common probe().
- Fix null pointer checking for clk_data.

changes since v11:
- Rebase to clk-next.
- Return error code from probe() if clock registration fail.

changes since v10:
- Remove COMMON_CLK dependency from clk/mediatek/Kconfig.

changes since v9:
- Rebase to v4.8-rc1.
- Drop a fix patch of parent clock initial state. It will be replaced by a new
  patch from Mike/Stephen.
- Replace clk.h with clk-provider.h.
- Correct register settings of clocks.

changes since v8:
- Rebase to v4.7-rc1.
- Include mt2701-resets.h in mt2701.dtsi.
- Remove an unused property from apmixedsys DT node.

changes since v7:
- Rebase to clk-next.
- Implement subsystem clocks in seperated files.
- Replace critical clock enabling with CLK_IS_CRITICAL flag.
- Reduce most clock registrations in CLK_OF_DECLARE().
- Remove __init and __initconst from most init fucntions and data,
  and replace driver registration with platform_driver_register().
- Replace some common function or variable names with unique names.
- Use real clock for UARTs.

changes since v6:
- Rebase to v4.6-rc1.
- Register subsystem clocks in probe() instead of CLK_OF_DECLARE().
- Add clocks that referred by subsystem clocks.
- Fix clk_data size of apmixedsys.
- Add config options for each subsystem clock provider.

changes since v5:
- Rebase to v4.5-rc1 and [1].
- Enable critical clocks for MT2701
- Refine dt-binding documents, add reset controller support for hifsys.

changes since v4:
- Rebase to v4.5-rc1.
- Remove CLK_SET_RATE_PARENT from divider flags.
- Add img_jpgdec_smi clock.
- Move clk/mediatek/Kconfig into menu section in clk/Kconfig.

changes since v3:
- Change the parent of mm_mdp_bls_26m from clk26m to pwm_sel.

changes since v2:
- Fix ethsys definition.
- Replace read-modify-write with regmap_update_bits() in clock operations.
- Move mt2701-resets.h to include/dt-bindings/reset/.
- Add hifsys reset patch from John Crispin.

changes since v1:
- Document MT2701 compatible strings.

[1] https://patchwork.kernel.org/patch/8147901/

Erin Lo (1):
  arm: dts: mt2701: Use real clock for UARTs

James Liao (1):
  arm: dts: mt2701: Add clock controller device nodes

Shunli Wang (2):
  clk: mediatek: Add MT2701 clock support
  reset: mediatek: Add MT2701 reset driver

 arch/arm/boot/dts/mt2701.dtsi          |   50 +-
 drivers/clk/mediatek/Kconfig           |   43 ++
 drivers/clk/mediatek/Makefile          |    7 +
 drivers/clk/mediatek/clk-gate.c        |   52 ++
 drivers/clk/mediatek/clk-gate.h        |    2 +
 drivers/clk/mediatek/clk-mt2701-bdp.c  |  148 +++++
 drivers/clk/mediatek/clk-mt2701-eth.c  |   90 +++
 drivers/clk/mediatek/clk-mt2701-hif.c  |   91 +++
 drivers/clk/mediatek/clk-mt2701-img.c  |   90 +++
 drivers/clk/mediatek/clk-mt2701-mm.c   |  133 ++++
 drivers/clk/mediatek/clk-mt2701-vdec.c |  101 +++
 drivers/clk/mediatek/clk-mt2701.c      | 1054 ++++++++++++++++++++++++++++++++
 drivers/clk/mediatek/clk-mtk.c         |   40 ++
 drivers/clk/mediatek/clk-mtk.h         |   41 +-
 drivers/clk/mediatek/clk-pll.c         |    1 +
 15 files changed, 1933 insertions(+), 10 deletions(-)
 create mode 100644 drivers/clk/mediatek/clk-mt2701-bdp.c
 create mode 100644 drivers/clk/mediatek/clk-mt2701-eth.c
 create mode 100644 drivers/clk/mediatek/clk-mt2701-hif.c
 create mode 100644 drivers/clk/mediatek/clk-mt2701-img.c
 create mode 100644 drivers/clk/mediatek/clk-mt2701-mm.c
 create mode 100644 drivers/clk/mediatek/clk-mt2701-vdec.c
 create mode 100644 drivers/clk/mediatek/clk-mt2701.c

--
1.9.1




More information about the linux-arm-kernel mailing list