[PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts

[Shawn Guo]

On Tue, Oct 18, 2016 at 05:30:28PM +0530, Jagan Teki wrote:
> Hi Shawn,
> 
> On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki at openedev.com> wrote:
> > This is series add dts support for Engicam I.Core M6 qdl modules. just
> > rebased on top of linux-next of previous set[1].
> >
> > [1] http://www.spinics.net/lists/kernel/msg2358233.html
> >
> > Jagan Teki (5):
> >   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
> >   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
> >   ARM: dts: imx6qdl-icore: Add usbhost support
> >   ARM: dts: imx6qdl-icore: Add usbotg support
> >   ARM: dts: imx6qdl-icore: Add FEC support
> >
> >  arch/arm/boot/dts/Makefile           |   2 +
> >  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
> >  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
> >  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
> >  4 files changed, 391 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
> >  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
> >  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi
> 
> Can you pick this series?

Sorry for the delay.  The first two patches look good, and I had a
couple of small comments on the other 3.  Also, for the initial board
support submission like this, you do not need to split it per device
support.  That said, please squash the series into one patch when
resending.

Shawn