[linux-sunxi] [PATCH v4 6/9] clk: sunxi-ng: Add A64 clocks
Chen-Yu Tsai
wens at csie.org
Thu Oct 20 08:50:21 PDT 2016
On Tue, Oct 11, 2016 at 10:28 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Add the A64 CCU clocks set.
>
> Acked-by: Rob Herring <robh at kernel.org>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
> Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +-
> drivers/clk/sunxi-ng/Kconfig | 11 +-
> drivers/clk/sunxi-ng/Makefile | 1 +-
> drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 918 +++++++++++-
> drivers/clk/sunxi-ng/ccu-sun50i-a64.h | 72 +-
> include/dt-bindings/clock/sun50i-a64-ccu.h | 134 ++-
> include/dt-bindings/reset/sun50i-a64-ccu.h | 98 +-
> 7 files changed, 1235 insertions(+), 0 deletions(-)
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.h
> create mode 100644 include/dt-bindings/clock/sun50i-a64-ccu.h
> create mode 100644 include/dt-bindings/reset/sun50i-a64-ccu.h
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> index 3868458a5feb..74d44a4273f2 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> @@ -7,6 +7,7 @@ Required properties :
> - "allwinner,sun8i-a23-ccu"
> - "allwinner,sun8i-a33-ccu"
> - "allwinner,sun8i-h3-ccu"
> + - "allwinner,sun50i-a64-ccu"
>
> - reg: Must contain the registers base address and length
> - clocks: phandle to the oscillators feeding the CCU. Two are needed:
> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
> index 1b4c55a53d7a..8454c6e3dd65 100644
> --- a/drivers/clk/sunxi-ng/Kconfig
> +++ b/drivers/clk/sunxi-ng/Kconfig
> @@ -53,6 +53,17 @@ config SUNXI_CCU_MP
>
> # SoC Drivers
>
> +config SUN50I_A64_CCU
> + bool "Support for the Allwinner A64 CCU"
> + select SUNXI_CCU_DIV
> + select SUNXI_CCU_NK
> + select SUNXI_CCU_NKM
> + select SUNXI_CCU_NKMP
> + select SUNXI_CCU_NM
> + select SUNXI_CCU_MP
> + select SUNXI_CCU_PHASE
> + default ARM64 && ARCH_SUNXI
> +
> config SUN6I_A31_CCU
> bool "Support for the Allwinner A31/A31s CCU"
> select SUNXI_CCU_DIV
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index 106cba27c331..24fbc6e5deb8 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_SUNXI_CCU_NM) += ccu_nm.o
> obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
>
> # SoC support
> +obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
> obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
> obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
> obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> new file mode 100644
> index 000000000000..c0e96bf6d104
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> @@ -0,0 +1,918 @@
> +/*
> + * Copyright (c) 2016 Maxime Ripard. All rights reserved.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_mp.h"
> +#include "ccu_mult.h"
> +#include "ccu_nk.h"
> +#include "ccu_nkm.h"
> +#include "ccu_nkmp.h"
> +#include "ccu_nm.h"
> +#include "ccu_phase.h"
> +
> +#include "ccu-sun50i-a64.h"
> +
> +static struct ccu_nkmp pll_cpux_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT(8, 5),
> + .k = _SUNXI_CCU_MULT(4, 2),
> + .m = _SUNXI_CCU_DIV(0, 2),
> + .p = _SUNXI_CCU_DIV_MAX(16, 2, 4),
> + .common = {
> + .reg = 0x000,
> + .hw.init = CLK_HW_INIT("pll-cpux",
> + "osc24M",
> + &ccu_nkmp_ops,
> + 0),
> + },
> +};
> +
> +/*
> + * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
> + * the base (2x, 4x and 8x), and one variable divider (the one true
> + * pll audio).
> + *
> + * We don't have any need for the variable divider for now, so we just
> + * hardcode it to match with the clock names
> + */
> +#define SUN50I_A64_PLL_AUDIO_REG 0x008
> +
> +static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
> + "osc24M", 0x008,
> + 8, 7, /* N */
> + 0, 5, /* M */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
> + "osc24M", 0x010,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
> + "osc24M", 0x018,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
> + "osc24M", 0x020,
> + 8, 5, /* N */
> + 4, 2, /* K */
> + 0, 2, /* M */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static struct ccu_nk pll_periph0_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT(8, 5),
> + .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
> + .fixed_post_div = 2,
> + .common = {
> + .reg = 0x028,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
> + &ccu_nk_ops, 0),
> + },
> +};
> +
> +static struct ccu_nk pll_periph1_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT(8, 5),
> + .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
> + .fixed_post_div = 2,
> + .common = {
> + .reg = 0x02c,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
> + &ccu_nk_ops, 0),
> + },
> +};
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
> + "osc24M", 0x030,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
> + "osc24M", 0x038,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +/*
> + * The output function can be changed to something more complex that
> + * we do not handle yet.
> + *
> + * Hardcode the mode so that we don't fall in that case.
> + */
> +#define SUN50I_A64_PLL_MIPI_REG 0x040
> +
> +struct ccu_nkm pll_mipi_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT(8, 4),
> + .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
> + .m = _SUNXI_CCU_DIV(0, 4),
> + .common = {
> + .reg = 0x040,
> + .hw.init = CLK_HW_INIT("pll-mipi", "pll-video0",
> + &ccu_nkm_ops, 0),
> + },
> +};
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_hsic_clk, "pll-hsic",
> + "osc24M", 0x044,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
> + "osc24M", 0x048,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
> + "osc24M", 0x04c,
> + 8, 7, /* N */
> + 0, 2, /* M */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
CLK_SET_RATE_UNGATE for all the PLLs?
> +
> +static const char * const cpux_parents[] = { "osc32k", "osc24M",
> + "pll-cpux" , "pll-cpux" };
> +static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
> + 0x050, 16, 2, CLK_IS_CRITICAL);
CLK_SET_RATE_PARENT.
[...]
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", mmc_default_parents, 0x09c,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +
Extra newline.
[...]
> +static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
> +static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
> + 0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
The divider is only 2 bits wide.
> +static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
> +static const u8 tcon1_table[] = { 0, 2, };
> +struct ccu_div tcon1_clk = {
> + .enable = BIT(31),
> + .div = _SUNXI_CCU_DIV(0, 4),
> + .mux = _SUNXI_CCU_MUX_TABLE(24, 3, tcon1_table),
Mux is only 2 bits wide.
> + .common = {
> + .reg = 0x11c,
> + .hw.init = CLK_HW_INIT_PARENTS("tcon1",
> + tcon1_parents,
> + &ccu_div_ops,
> + CLK_SET_RATE_PARENT),
> + },
> +};
> +
[...]
> +static const char * const dsi_dphy_parents[] = { "pll-video0", "pll-periph0" };
> +static const u8 dsi_dphy_table[] = { 0, 2, };
> +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_dphy_clk, "dsi-dphy",
> + dsi_dphy_parents, dsi_dphy_table,
> + 0x168, 0, 3, 24, 2, BIT(31), 0);
Divider is 4 bits wide, and mux offset is 8.
[...]
Regards
ChenYu
More information about the linux-arm-kernel
mailing list