[PATCH v4 5/9] clk: sunxi-ng: Implement minimum for multipliers

Chen-Yu Tsai wens at csie.org
Thu Oct 20 08:06:21 PDT 2016


On Tue, Oct 11, 2016 at 10:28 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Allow the CCU drivers to specify a multiplier for their clocks.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
>  drivers/clk/sunxi-ng/ccu_mult.c |  2 +-
>  drivers/clk/sunxi-ng/ccu_mult.h | 13 +++++++++----
>  drivers/clk/sunxi-ng/ccu_nk.c   |  8 ++++----
>  drivers/clk/sunxi-ng/ccu_nkm.c  |  8 ++++----
>  drivers/clk/sunxi-ng/ccu_nkmp.c |  4 ++--
>  drivers/clk/sunxi-ng/ccu_nm.c   |  2 +-
>  6 files changed, 21 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c
> index 6a02ffee5386..678b6cb49f01 100644
> --- a/drivers/clk/sunxi-ng/ccu_mult.c
> +++ b/drivers/clk/sunxi-ng/ccu_mult.c
> @@ -105,7 +105,7 @@ static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
>         ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
>                                                 &parent_rate);
>
> -       _cm.min = 1;
> +       _cm.min = cm->mult.min;
>         _cm.max = 1 << cm->mult.width;
>         ccu_mult_find_best(parent_rate, rate, &_cm);
>
> diff --git a/drivers/clk/sunxi-ng/ccu_mult.h b/drivers/clk/sunxi-ng/ccu_mult.h
> index 113780b7558e..c1a2134bdc71 100644
> --- a/drivers/clk/sunxi-ng/ccu_mult.h
> +++ b/drivers/clk/sunxi-ng/ccu_mult.h
> @@ -7,14 +7,19 @@
>  struct ccu_mult_internal {
>         u8      shift;
>         u8      width;
> +       u8      min;
>  };
>
> -#define _SUNXI_CCU_MULT(_shift, _width)                \
> -       {                                       \
> -               .shift  = _shift,               \
> -               .width  = _width,               \
> +#define _SUNXI_CCU_MULT_MIN(_shift, _width, _min)      \
> +       {                                               \
> +               .shift  = _shift,                       \
> +               .width  = _width,                       \
> +               .min    = _min,                         \
>         }
>
> +#define _SUNXI_CCU_MULT(_shift, _width)                \
> +       _SUNXI_CCU_MULT_MIN(_shift, _width, 1)
> +
>  struct ccu_mult {
>         u32                     enable;
>
> diff --git a/drivers/clk/sunxi-ng/ccu_nk.c b/drivers/clk/sunxi-ng/ccu_nk.c
> index a42d870ba0ef..eaf0fdf78d2b 100644
> --- a/drivers/clk/sunxi-ng/ccu_nk.c
> +++ b/drivers/clk/sunxi-ng/ccu_nk.c
> @@ -97,9 +97,9 @@ static long ccu_nk_round_rate(struct clk_hw *hw, unsigned long rate,
>         if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
>                 rate *= nk->fixed_post_div;
>
> -       _nk.min_n = 1;
> +       _nk.min_n = nk->n.min;
>         _nk.max_n = 1 << nk->n.width;
> -       _nk.min_k = 1;
> +       _nk.min_k = nk->k.min;
>         _nk.max_k = 1 << nk->k.width;
>
>         ccu_nk_find_best(*parent_rate, rate, &_nk);
> @@ -122,9 +122,9 @@ static int ccu_nk_set_rate(struct clk_hw *hw, unsigned long rate,
>         if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
>                 rate = rate * nk->fixed_post_div;
>
> -       _nk.min_n = 1;
> +       _nk.min_n = nk->n.min;
>         _nk.max_n = 1 << nk->n.width;
> -       _nk.min_k = 1;
> +       _nk.min_k = nk->k.min;
>         _nk.max_k = 1 << nk->k.width;
>
>         ccu_nk_find_best(parent_rate, rate, &_nk);
> diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
> index b2a5fccf2f8c..715b49211ddb 100644
> --- a/drivers/clk/sunxi-ng/ccu_nkm.c
> +++ b/drivers/clk/sunxi-ng/ccu_nkm.c
> @@ -100,9 +100,9 @@ static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
>         struct ccu_nkm *nkm = data;
>         struct _ccu_nkm _nkm;
>
> -       _nkm.min_n = 1;
> +       _nkm.min_n = nkm->n.min;
>         _nkm.max_n = 1 << nkm->n.width;
> -       _nkm.min_k = 1;
> +       _nkm.min_n = nkm->k.min;

Typo here.

>         _nkm.max_k = 1 << nkm->k.width;
>         _nkm.min_m = 1;
>         _nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
> @@ -129,9 +129,9 @@ static int ccu_nkm_set_rate(struct clk_hw *hw, unsigned long rate,
>         unsigned long flags;
>         u32 reg;
>
> -       _nkm.min_n = 1;
> +       _nkm.min_n = nkm->n.min;
>         _nkm.max_n = 1 << nkm->n.width;
> -       _nkm.min_k = 1;
> +       _nkm.min_n = nkm->k.min;

And here.

>         _nkm.max_k = 1 << nkm->k.width;
>         _nkm.min_m = 1;
>         _nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
> diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
> index 2c1398192e48..7968e0bac5db 100644
> --- a/drivers/clk/sunxi-ng/ccu_nkmp.c
> +++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
> @@ -107,9 +107,9 @@ static long ccu_nkmp_round_rate(struct clk_hw *hw, unsigned long rate,
>         struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
>         struct _ccu_nkmp _nkmp;
>
> -       _nkmp.min_n = 1;
> +       _nkmp.min_n = nkmp->n.min;
>         _nkmp.max_n = 1 << nkmp->n.width;
> -       _nkmp.min_k = 1;
> +       _nkmp.min_n = nkmp->k.min;

And here.

>         _nkmp.max_k = 1 << nkmp->k.width;
>         _nkmp.min_m = 1;
>         _nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width;
> diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
> index 2a190bc032a9..b1f3f0e8899d 100644
> --- a/drivers/clk/sunxi-ng/ccu_nm.c
> +++ b/drivers/clk/sunxi-ng/ccu_nm.c
> @@ -93,7 +93,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
>         struct ccu_nm *nm = hw_to_ccu_nm(hw);
>         struct _ccu_nm _nm;
>
> -       _nm.min_n = 1;
> +       _nm.min_n = nm->n.min;
>         _nm.max_n = 1 << nm->n.width;
>         _nm.min_m = 1;
>         _nm.max_m = nm->m.max ?: 1 << nm->m.width;
> --
> git-series 0.8.10

Otherwise,

Acked-by: Chen-Yu Tsai <wens at csie.org>



More information about the linux-arm-kernel mailing list