[PATCH 5/8] ARM: gr8: Add missing pwm channel 1 pin

[Maxime Ripard]

The PWM controller has two different channels, but only the first pin was
exposed in the DTSI. Add the other one.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/boot/dts/ntc-gr8.dtsi | 7 +++++++
 1 file changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/ntc-gr8.dtsi b/arch/arm/boot/dts/ntc-gr8.dtsi
index 74aff795e723..fad7381630f3 100644
--- a/arch/arm/boot/dts/ntc-gr8.dtsi
+++ b/arch/arm/boot/dts/ntc-gr8.dtsi
@@ -854,6 +854,13 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			pwm1_pins_a: pwm1 at 0 {
+				allwinner,pins = "PG13";
+				allwinner,function = "pwm1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			spdif_tx_pins_a: spdif at 0 {
 				allwinner,pins = "PB10";
 				allwinner,function = "spdif";
-- 
git-series 0.8.10